Hate to do this, but I have to. I’m selling my all time favorite rifle. I’ve had it for 3 years and barely put 100rds through it in its current configuration.
Specs are:
-Zermatt/Bighorn SR3 Long Action, Medium Tang, Feed Lip Mag Cut, 20 MOA rail, purchased from Red Beard Gunworks in Texas so has their logo behind the ejection port. Action has 300rds on it.
-TriggerTech Special Curved blade set at roughly 2.5-3lbs.
-Proof Research CF barrel, Savage Prefit, 7mm Remington Magnum, Sendero Profile, 1:9 twist, 24” in length. Purchased in Dec 2018 before Proof did Zermatt shouldered pre-fits. Round count of 120 with all factory ammo. Has NSS barrel nut.
-Manners T4A with Badger Mini Chassis/Alum Bedding Block, purchased used from a hide member, was originally tan and cut for a Surgeon, sent back to Manners for Swamp Camo paint job and Bighorn Cut. Also cut to 13.5 LOP. I clearanced the bedding block for the safety selector with a dremel because it was making contact causing the safety to bind.
-Wiebad Cheek Pad
- (1) Magpul AICS Pattern 300 WM 5rd Polymer magazine, (3) AICS Metal 300 WM 5rd Magazines
-Vortex PMR 30mm .97 rings
-Vortex Razor AMG 6-24x50 EBR-7 Mil/Mil. This is the older version with the crosshair in the center. Has Vortex scope caps.
-PVA Shockwave .30 Cal muzzle brake, never been fired, has two small idiot scratches shown in pics, blended thread protector included.
-Small Safe scratch/knick on tang shown in pics.
-Bipod Not Included
-Weighs 11.5lbs without bipod, 12.5lbs with.
-Do not have load data or target pics for this barrel, I can say it did like Winchester 150gr Silvertips and Hornady 162gr Precision Hunter.
$4,500 plus shipping and insurance to your FFL on the buyer’s expense.
$2,700 without the scope and rings. Same as above.
Update 5/17/21:
Scope is sold. Rifle still available for $2,700.
Prices are fair and mostly firm. PM with any offers less than asking.
Can also include for an additional agreed upon amount the following: Redding Type S Bushing Die, Seater with Micrometer Stem, 100pcs of Norma twice fired brass, 100pcs new Winchester brass, 50pcs new Nosler brass and about 500 misc bullets everything from Berger’s to Nosler’s to Hornady A-Max/ELD’s. All 100ct boxes. Grain weights from 140-168gr. Can get exact quantities/inventory for interested parties purchasing rifle.
Not looking to part out anything. Not going down that road unless the rifle doesn’t sell and I will create a different ad(s) if that happens. Please don’t call dibs on anything in your reply’s to the post. First “I’ll take it” in the post or in private messages trumps all. Please PM me if your offer is below $2,700. You cannot build this rifle for that price.
Payment via PayPal Goods & Services, Certfied Bank Check or wire transfer. Nothing else.
Specs are:
-Zermatt/Bighorn SR3 Long Action, Medium Tang, Feed Lip Mag Cut, 20 MOA rail, purchased from Red Beard Gunworks in Texas so has their logo behind the ejection port. Action has 300rds on it.
-TriggerTech Special Curved blade set at roughly 2.5-3lbs.
-Proof Research CF barrel, Savage Prefit, 7mm Remington Magnum, Sendero Profile, 1:9 twist, 24” in length. Purchased in Dec 2018 before Proof did Zermatt shouldered pre-fits. Round count of 120 with all factory ammo. Has NSS barrel nut.
-Manners T4A with Badger Mini Chassis/Alum Bedding Block, purchased used from a hide member, was originally tan and cut for a Surgeon, sent back to Manners for Swamp Camo paint job and Bighorn Cut. Also cut to 13.5 LOP. I clearanced the bedding block for the safety selector with a dremel because it was making contact causing the safety to bind.
-Wiebad Cheek Pad
- (1) Magpul AICS Pattern 300 WM 5rd Polymer magazine, (3) AICS Metal 300 WM 5rd Magazines
-Vortex PMR 30mm .97 rings
-Vortex Razor AMG 6-24x50 EBR-7 Mil/Mil. This is the older version with the crosshair in the center. Has Vortex scope caps.
-PVA Shockwave .30 Cal muzzle brake, never been fired, has two small idiot scratches shown in pics, blended thread protector included.
-Small Safe scratch/knick on tang shown in pics.
-Bipod Not Included
-Weighs 11.5lbs without bipod, 12.5lbs with.
-Do not have load data or target pics for this barrel, I can say it did like Winchester 150gr Silvertips and Hornady 162gr Precision Hunter.
$4,500 plus shipping and insurance to your FFL on the buyer’s expense.
$2,700 without the scope and rings. Same as above.
Update 5/17/21:
Scope is sold. Rifle still available for $2,700.
Prices are fair and mostly firm. PM with any offers less than asking.
Can also include for an additional agreed upon amount the following: Redding Type S Bushing Die, Seater with Micrometer Stem, 100pcs of Norma twice fired brass, 100pcs new Winchester brass, 50pcs new Nosler brass and about 500 misc bullets everything from Berger’s to Nosler’s to Hornady A-Max/ELD’s. All 100ct boxes. Grain weights from 140-168gr. Can get exact quantities/inventory for interested parties purchasing rifle.
Not looking to part out anything. Not going down that road unless the rifle doesn’t sell and I will create a different ad(s) if that happens. Please don’t call dibs on anything in your reply’s to the post. First “I’ll take it” in the post or in private messages trumps all. Please PM me if your offer is below $2,700. You cannot build this rifle for that price.
Payment via PayPal Goods & Services, Certfied Bank Check or wire transfer. Nothing else.
Attachments
-
77644176-1696-44DF-A547-A172BA955986.jpeg -
00928D51-73D7-49A8-8277-625BC17E3BD3.jpeg -
B43C491B-A4D1-475A-9546-A6069E60E3D8.jpeg -
79EEF140-F34D-4CC4-B0E6-F14756517AA3.jpeg -
C58B5AFA-9EA6-448E-89B1-E98BC5DCBD23.jpeg -
62D46644-5F61-4F64-8F4B-56C941F0EB1B.jpeg -
6092DBE2-8DFA-4A1D-929A-95B94585B6C9.jpeg -
07F0E8EB-EB03-4154-A077-15B9439DB042.jpeg -
8E90AA0A-378B-4DA6-8F5C-22C4B37FB5FA.jpeg -
49D9C383-4A6E-4BE3-BF55-D1545DE77A48.jpeg -
ACBCEE5E-6BD1-426A-A1B0-293841E12220.jpeg -
1683BA9E-08F6-43B0-B40B-14E2F4EAD855.jpeg -
FAB9CBDA-E34C-4F32-A872-42ECB51053E0.jpeg -
F58E0061-5537-463B-8BB8-52D2AD7AEE31.jpeg -
710702D6-1A0D-477A-A9DB-E60600DAA97B.jpeg -
F47F19F6-F73F-4E26-8573-6FE212BBFC2E.jpeg -
6F30BE15-63C6-4232-8FA1-132FED8FD45E.jpeg
Last edited:
