Zermatt Origin barrel question

[TommyD11730]

Anyone know what's the largest OD barrel the Origin can take?

Thanks!

 

[Supersubes]

The diameter of the receiver is 1.35. Id do no larger than 1.3”.

 

[Ziloooo]

https://www.zermattarms.com/wp-content/uploads/2022/09/Origin-Actions-Tenon.pdf

Zermatt recommends 1.200" - 1.300", I'd rather follow their recommendation

 

[TommyD11730]

The diameter of the receiver is 1.35. Id do no larger than 1.3”.

Thanks. Thinking it took Savage small shank and wouldn't accommodate say a 1.25" barrel.

 

[b6graham]

Thanks. Thinking it took Savage small shank and wouldn't accommodate say a 1.25" barrel.

only if you want a barrel nut would you get a 'savage small shank' but the dia and threads are the same

1.20/1.25" is standard and works perfectly

 

[spife7980]

Thanks. Thinking it took Savage small shank and wouldn't accommodate say a 1.25" barrel.

Savage being shoulderless has a minimum required diameter to be concerned with.
You are asking about the maximum for a shoulder, opposite ends of the spec