Guys - buying a Wilson combat rig. They are building upper custom. Trying to decide between 16" and 20" barrels in 6.5 CM.

Cannot suppress yet until CA changes its laws but will use heavy duty brake and Magpul PRS stock with JP Enterprises recoil spring.

With that set up any concerns with mid length gas system?

New, unfired action. Black. $750 shipped to FFL. Action has been installed to check fitment. Also have Aero action wrench for $75 (SOLD). Paypal f/f or venmo gift.

Looking to sell my All NEW Tan Cadex R7 338lm Shp 27" bartlein barreled action in a Lite Strike chassis complete with cadex evo trigger. (Rem 700 footprint 4lug 50° throw)

Comes with pictured 2 - Rare FDE 338LM 3.850 AICS Mags purchased through brownells at $100 a pop.

THIS IS LIKE A CDX R7 LCP EXCEPT IT HAS THE FULL TOP RAIL FOREND FOR CLIPONS AND OCD FELLERS LIKE ME.

Has 10, yes only 10 rounds down the tube when it was zeroed, will include the 10 fire formed brass with the rifle for them fellow reloaders.

Asking $5500 shipped
FFL to FFL.

Up for sale is a Vortex razor 1-6x, E in mrad.
I recently purchased this and decided to go another route. Includes scope caps and lower lever.

Price $1,100 shipped.

No trades.

PM if interested

Selling a XLR Element 4.0 MG 700 SA with the Carbon Fiber buttstock, bag rider, and Carbon fiber grip. Whole chassis assembly weighs 33 ounces. Multicam color, like new. Only wear marks are very slightly on the Arca rail towards the front(pictured) and in the mag well. $1100 shipped to your front door.

AR-10 SI Defense (Now Falkor Defense) Billet Upper, Lower & Hand guard with Midnight Bronze Cerakote
McGowen barrel chambered in 6.5 Creedmore 1-8" Twist, Stainless, HBAR Contour w/ .750" Journal, 5/8" x 24 TPI, Recessed Crown, 20" Long
Hogue Grip
Seekins Precision Charging Handle
Seekins Precision Ambidextrous Safety
Seekins Precision bolt catch
Strike industries mag release
Strike industries forward assist
CMC Trigger
Luth AR stock
Great shooter just don’t get much use out of it and need money for other projects. Less than 100 rounds down the pipe. Open to trades for scopes, barreled actions, thermals etc..
$1000+Shipping

RRS BTC-pro dual clamp, had it on my Atlas for maybe a week to accommodate a new rifle with a pic rail, ended up just getting a ARCA rail for it so no longer need the Dual Clamp. Also have a Recoil X .30cal suppressor brake, maybe 20rds actually fired through it. It fits the diligent defense Enticer line and dead air Nomad, liked it but being its on a hunting rifle I wanted a short profile.
RRS BTC-Pro-$50
RecoilX Brake-$150

Previously owned 3 Surgeons (591 Short Action) from Prague OK. Looking for thoughts from owners of both on how current Surgeon actions compare with Accuracy International actions? Previous Surgeons were trouble free and built like a tank. No experience with AI. Thanks.

I have a Brand New Aero Solus Action 308bf with their Obsidian Finish and a 24" 6.5mm Brux barrel straight 1.25 contour. The barrel was chambered for an ARC Nucleus Gen2 in 6.5 Creedmoor so it will have to be chambered for the Solus. The barrel has had 2k rounds through it the action has been played with but hasn't seen a single piece of brass.

I am selling these as a combo for $1000 plus shipping to your local FFL or will trade plus cash for either a Terminus or a Area 419 Hellfire Action. Otherwise I'll end up keeping it.

PM me if you are interested or have questions, I am not going to DM you first.

SOLD

$3299, $3,699.99, shipped to your FFL. No international shipping. See other restrictions, below.

I purchased new from JP Enterprises, and its just sat in my safe, unfired. So its time to pass it along. Here are the specs, and estimated current pricing of such.


I also added a JP arca swiss rail (JPHG-AP15, $110) and a Phase 5 extended bolt release ($60).

Not permitted to (and will not) ship to the following states: California, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Washington State, and Washington, D.C.

Prefer a certified bank check or bank money order. Let's get on Facetime so you can see the rifle, and have any questions answered. Please PM me to arrange a time. Be careful what you post in this thread as there are scammers waiting to pounce.

Thanks for looking and please let me know if you have any questions.

Had my first issue with the Ckye double pull. Here’s a simple check/fix/cleaning for someone to avoid the same.

The spring/brass pin assembly in the leg got some dirt from the corn or alfalfa field in it. Had issues with the brass pin being able to move eventually just seizing it up in the unlock position where the leg wouldn’t lock into place.

Simple fix but a good place to make a regular service area in the off season

On another note after the cleaning I installed some new pod knobs. Really nice upgrade for anyone looking

SOLD*******

CZ457 Action
Area419 Scope Rail
Timney Trigger Flat
MDT GEN 2 Chassis
Full Internal Weights
Set of External Weights(2)
Weighted Forend Tip
MDT Baker Wings

BIPOD NOT INCLUDED!!

I accept Venmo or Paypal G&S you cover the fees with Paypal.

SOLD

SOLD

Trade interests are listed below-

Custom Glock 34 or 17 with optic and surfire x300(can include accessories to make up value difference. Optic and Surefire are a must though).
Staccato HD 2011(Takes Glock Mags)
STI Tactical 4.0 (9mm)
Other 2011's (9mm)
Couple Cases of 22LR Match Ammo(Eley Match Same Lot#)

Any questions please PM.

So this is a bunch of stuff I need to get this out of my house.

I really don’t want to list every item

It goes as a lot

Asking 250$ shipped

I have a lot of experience with shooting but it is primarily with pistols and small frame gas guns. Sometime around 2010, I purchased a GAP 260 Rem and had a lot of fun with it. With kids and life, I just could not spend the time to go do competitions and even had a hard time getting to a range so I ended up selling the rifle.

My kids are now out of the house and we bought a place outside Houston where I have room to shoot far (far for me, I can safely shoot almost 1,300 yards). So for the last eight months I have been reading this forum and the precision rifle blog. I have also reached out and talked to a bunch of people who have been incredibly helpful and friendly but I still have some really basic questions and I also want to check myself versus the real life experience of the forum.

I do not want to own half a dozen bolt guns, I would greatly prefer to own a single platform that allows for changing caliber by swapping barrels and bolts. The two choices that I landed on were Accuracy International and the Terminus Zeus. My goal is to be able to shoot 1,200 yards with the rifle reliably. I will also use the rifle on occasion to shoot feral pigs and deer. I do not expect to compete with the rifle, I also don't expect to ever sell it (my kids can deal with my gun collection after I am dead). I am not working with any real budget constraints in that I can afford an AI and a high end piece of glass.

1) My first question is, if you look at PRS ranking and the top 200 shooters none of them were using AI last year. Are the custom actions with Bartlien barrels just inherently more accurate than AI?

2) Am I being overly concerned with accuracy given my use case above?

3) Am I being a moron? Is a barrel swap system even necessary or could I just build a 6mm or a 6.5mm and be good to go for the things I want to do?

So that you know why I am thinking this way, I have been corresponding with a couple of people and one of them shoots for the US Army and he is uses a barrel swap system. He likes it because of the flexibility of the system and it's ability to scale up and down. He was telling me for instance that he spends a lot of time swapping to a 5.56 layout to work on wind calls for instance. The idea of a buying one rifle platform with a premium scope and then swapping in different barrels and bolts (instead of new firearms) is what is appealing to me, sort of future flexibility if I decide to change things up.

Practically new with about 50 rds on it. Will come with 3 Bergara factory mags and a Trigger Tech Special single stage flat trigger

$700 shipped to your FFL via PayPal F&F, Venmo, or Zelle

Will add pics tonight if it hasn’t sold. Looks and is almost new.

John Rusyn recently passed away from a brain tumor. He went quickly with wife and I at his side

John was 67 years old
He was retired CW3 from US Army, US Army National Guard , Retired San Jose PD
John taught at Panama Jungle School in the late 1970’s. He graduated Army Sniper School in 1978
John had full tours in Bosnia, multiple to Afghanistan and Iraq. He loved doing work against evil
John was an exceptional shooter and rifle instructor. I loved teaching alongside John

He will be missed by many many people fortunate enough to call him friend. I called him Brother

New in Box Vector X (12x-DMR)
Just recently picked up here on the forum from Sendero_Man, no longer needing this 12x, open box pristine.

$2650 shipped

Venmo Zelle or Certified Bank Funds

No Trades Please

Been reading reviews about the mercury recoil reducer, some say the mercury helps reduce recoil others claim it's just the weight. Wouldn't putting steel cold roll or lead in the bolt hole do the same thing without the chance of a leak.

Ladies and gents, it's that time of year again. I'm on vacation in Kissimmee with the family.

Last year we talked about gators; as there were/are still a few that now appear to live at the resort we stay at. Kids have already dragged me to the ponds to see if there were any gators/turtles/wildlife, and most certainly there was.

This year I've got a different request. I'm a carpenter by trade, and I'm looking for a cool tool store to check out. We don't have many at home in ME, so being able to see/handle things before purchase becomes difficult. This is pretty much the extent of what we have at home:

www.bistools.com

Specifically, I'm looking for a Martinez hammer. Not that I can't buy one online, I'm just a brick and mortar type of guy. So, if anyone knows of a cool construction tool store around Kissimmee/Orlando/Orange Lake, I'm all ears. Thanks.

Life is changing, and I am leaving the sport for now. Here is a list of things that I have left. I will post more pics of the other items when I get home this evening IF they haven’t sold before then. PM me “I will take it” to stop scammers. No holds. All prices are shipped.

Payment via PayPal F&F, Venmo, or Zelle


1. DNT SOLD

2. Manners TCS MAX. SOLD

3. McMillan U1 SOLD

4. REMOVED

5. Garmin Xero C1. Like new. $450 SPF

6. ARC M-brac. SOLD

7. Gray Ops Shorty Arca SOLD

- Has a vertical grip from Black Collar arms
- upgraded adjustable mag well and the thumb rest.
- TR2 buttock. Black in color. Weighs 3lb 2oz.

Could trade for a rangefinder +-cash on my end.

Asking $475 TYD. Let me know if you have any questions.

I am selling my Schmidt & Bender 1-8x24 PM II ShortDot Dual CC W/ Geissele Mount as I dont use it as much as Ithouhgt I would. The scope has bout 100 rounds on it.


More details about it here:


$3750 shipped with mount

Bought this a while back and dont see myself building anything anytime soon with it. Comes with hawkins bottom metal.

Bedded for an origin SA, with pillars

900 tyd

*Action sold*

NIB Tangent Theta 3-15x50mm LRH. It has never been mounted in rings, effectively brand new. Amazing clarity and detail glass, bought for a lightweight build that’s no longer happening. LRH MRAD reticle

$3100 shipped

Venmo, Zelle or Certified Bank funds

No Trades Please

PM me for any questions, thanks for the interest