Firearms WTS: Remington 700 300 win mag Rifle Build
- By STI_1911_Guy
- Buy - Sell - Trade
- 16 Replies
This was my hunting rifle until I decided to build a lighter one for hunting. Getting older and weight matters more now then it used to. This has been a GREAT rifle, absolute tack driver with 210 sierra matchkings and 77grains H1000. Currently it weighs 11 lbs with no optic. Since this was my hunting gun it didnt get shot much so the round count now is 287 rounds. The specs of the rifle are:
26" criterion varmint barrel with muzzlebrake
Timney trigger set at about 2.25 lbs
Manners T5A stock glass bedded
Remington 700 factory un-trued action
Leupold dual dovetail mounts (lapped)
I have decided to part this out after trying to sell it outright. Seems like there was much more interest in parting out. So here is the part out list.
The barreled action: $600 OBO
Action and bolt with custom bolt knob
Timney trigger
Leupold dual dovetail rings 30mm
Criterion barrel 26" varmint with criterion oversized ground recoil lug and trued barrel nut
3 port (angled ports) brake-I made it.
Manners T5 stock:$500 OBO
Stock- cheek piece was in-letted to be able to remove the bolt from the action
Glass and pillar bedded- Glass bedding was removed ahead of recoil lug to work with the barrel nut
Blind box with factory remington floor plate
Action screws
26" criterion varmint barrel with muzzlebrake
Timney trigger set at about 2.25 lbs
Manners T5A stock glass bedded
Remington 700 factory un-trued action
Leupold dual dovetail mounts (lapped)
I have decided to part this out after trying to sell it outright. Seems like there was much more interest in parting out. So here is the part out list.
The barreled action: $600 OBO
Action and bolt with custom bolt knob
Timney trigger
Leupold dual dovetail rings 30mm
Criterion barrel 26" varmint with criterion oversized ground recoil lug and trued barrel nut
3 port (angled ports) brake-I made it.
Manners T5 stock:$500 OBO
Stock- cheek piece was in-letted to be able to remove the bolt from the action
Glass and pillar bedded- Glass bedding was removed ahead of recoil lug to work with the barrel nut
Blind box with factory remington floor plate
Action screws