What kind of pussy deletes their own thread lol

I had additions

Here’s the video: Login to view embedded media
I sure hope at the very least, they are made to forfeit all previous prizes and banned for life…

Sold!

Need to put up my AIAT for sale. I bought it new from Euro Optic in December, 2021. Both barrels will shoot better than .4MOA 5 shot groups. (140g Hornady Match for the 6.5 and 175g FGMM for .308). Selling because I picked up an AXSR and have it setup for multiple calibers. Has worked 100% flawlessly, no issues. Couple tiny scuffs here and there, nothing major at all. Details below:

AIAT Folder with 20MOA Low Rail
Thumbhole Kit
Anarchy Outdoors Arca Bipod Spigot
Factory 6.5cm Barrel 1:8, 24" 5/8x24 threaded, 500 rounds on it, no brake
Factory .308 Barrel 20", 5/8x24 threaded 350 rounds on it (bought this used, only put 50 on it, gen 3 little bastard brake.
Severely pricey Cheekpiece Thumbscrews
Adjustable Butt Plate
Hoptic Cheek Pad
Anarchy Outdoors Thumbrest
.308 10 Round Mags x2
+ all the stock parts/instructions etc. that originally came with it.

***Optic, mount, bipod and 6.5cm brake not included, will ship with just the original trigger shoe, not the flat one. ***

All sold. If you don't want the .308 barrel + brake, subtract $550. Reach out if you would like any specific pictures.

I recently bought a right handed cz457 even though im a lefty. Kind of wishing I got the left handed version now. Guess I could always get a left handed version later and have this one for my wife or friends to shoot. Just looking to see what other lefties prefer.

Read the site rules you agreed to when joining. Do not sell outside PX. Do it again and you will be banned.

Generally speaking, I'm a bolt gun guy....but I do own an older DPMS AR-15. It mostly sits in the safe, but my son has shown a recent interest in it. I'm wondering about the feasibility of swapping out the upper, adding a better trigger and scope, and ending up with something he can shoot at steel out to 300-400 yds (recreationally).

In your opinion, would something like this make sense, or would I end up spending money on something that isn't worth it once assembled?

Thanks!

Well after buying my first load of railroad ties 6 years ago and having a life happens moment I got around to finishing the new range. I can engage targets from multiple angles of the property with the rifle, mostly .22LR, but can handle any rifle with the 1/2” AR500 steel silhouettes and gongs. The plate rack and decision tree are also AR500. Even both KYLs are AR500, the smallest only for air-rifle or Rimfire. Max Distance ~125yds.

Picked up the decision tree when my brother and I were at one of the Knob Creek Subgun matches. The plate rack came from https://www.spartanarmorsystems.com/diy-ar500-plate-rack/ as a kit and a buddy of mine welded it up for me. All the other steel targets came from Shootingtargets.com. They are local to me and after I place an order I have it the next day.

The backstop is backfilled with sand that tapers back from the wall. I put limestone down to keep from tracking all the sand that was the base. A buddy of mine has a sod farm and is going to drop off a skid of sod to “dress up” around the limestone and around the edges of the backstop to help with erosion.

Was released on Apple TV, pretty good flick. Wonder how true to life it was, or was it dramatized for entardtaintment?

Anyone in the construction business, whatever happened to stamped steel replacing 2x4s for residential construction? I thought this was touted as the next great thing, especially with lumber being such poor grade....

Yet another thread about airsoft stocks for rimfire rifles, sorry in advanced.

Anyway, I've been toying with the idea of getting a Bergara B14r barreled action and dropping it in the airsoft versions of the M40A5 or an AICS chassis. It seems like one of these with an HMR bottom metal would be a drop in fit as long as the airsoft version is 1:1 scale. I know trying to drop the B14r in the AICS chassis might take some more DIY/fab work to make it fit since the 700 footpring and the AI footprint are different

Anyone else do anything like this?

(Yes I already know this is probably not the most cost effective idea, I just kinda want a fun .22 clone of something haha)

I got a batch of loaded 6 dasher using 3 times fired(from my rifle) alpha 6 dasher brass. About half of the batch started having chambering issue today.

The problem is the bolt cannot be closed.

70% of the unchambered rounds can be extracted using the bolt's extractor, the rest 30% need to use cleaning rod or some kind of tool to pull from the back.

I compared FL resized brass with fired brass, 0.002inch difference, so I reckon resize part should be good.
Then I measured neck diamater(outside the neck), it is almost identical between unchambered round and round can be chambered.
I also checked the ogive between rounds can be chambered and cannot be chambered, it is.the same.
Lastly, I checked the outer diameter close to the extractor grove between fired and unchambered, it's almost identical.

Same load has been fired in the same rifle few months ago.

And same thing happened on a 308win rifle too, only differenc is on the 195gr ELD bullet of the 308 unchambered rounds, there is some scratches, which I thought could be seating depth issue, but will need to verify this shortly. No marks on the 6 dasher ELD 108gr bullet.

But for the 6 dasher's chambering issue, any suggestion or direction would be really appreciated.

UPDATE:
I also pull the bullet out of a loaded round but could not chamber, compared the headapace it is same as FL resized brass, but even the unloaded brass with only primer can not be chambered, so it was able to fire last time, but after resize 0.002inch, it.can not be chambered, how does this make sense?

UPDATE 2:
So I pulled all of the unchambered rounds, FL resized, check chambering, no problem, expand using .242 mandral, chamber no problem, charge then seat the ELD 108gr bullet about 0.025inch from lands, check chambering, some still could not chamber.
I don't get it, how could seating bullet causing loaded rounds not chambering? And it seems this only happened randomly within the same batch.

I've had a couple PM's asking about the second generation Bering Optics Super Yoter clip on. The main question seems to be "how good is the image at range". I thought I would post these here for others who might be interested also.

I'm not going to call this a comparison, because we all know it's not an apples to apples test because the Yoter is in a wider FOV class and it's a third of the price. But I will say that within a couple hundred yards and under 10x the SY-Cii holds its own very well image wise. Plus it has onboard recording, is smaller, and has the larger FOV. I wouldn't have hesitated to spend this winter hunting with it if the Eotechs hadn't come along.

These pics were taken back to back. I've got more at 700yds I can post later if anybody is interested.

Also note, at 2.5x I'm loosing FOV with the Yoter. There is more past the edges.

closed

Has the picatinny clamp. In great condition. $200 shipped (lower 48).

Too much stuff laying around. Time for some to go.

1. Rifle Basix trigger. L-1. $100 shipped

2. Stock 700 trigger with safety. Don't know what it came out of. $30 shipped. SPF

3. 700 SA firing pin assembly. $60 Shipped.

4. David Tubb 700SA speedlock firing pin. $60 Shipped.

Take items 1,3,4 all together for $155 shipped.

5. Bell and Carlson 700 LA BDL, Varmint/tactical vertical grip. $200 shipped. SOLD

6. HS Precision, 700 LA, green with black webbing. $250 shipped. SOLD

New in the box KAC 14.5 Mod2 Mlok upper receiver. This one was sealed in the box one minute ago until I opened it for a few photos.

2k shipped. Credit card adds 3%. Sold.

Thanks,

Jake

Bighorn SR3 .223. Patriot Valley 26” proof comp contour 1-7 rock creek. Threaded and includes the pva brake. Action has a brand new firing pin assembly as I broke the old one with dry fire, as a bonus it comes with the old one to use as a Dryfire pin assembly. This barrel shoots just about anything you put through it amazingly. Stacks 88 eldm’s on top of each other at 2800fps. 77’s, 85’s, 68’s, 52’s- it doesn’t care. They all shoot. Less than 1000 rounds down the pipe. Action also comes with additional .308 bolt face. 20moa rail. I can include two magazines, one accurate metal mag and an mdt. Packaged as above $1550 shipped. Only trades I would be interested in is a Ruckus or Anti-x. I’m standardizing everything I have left to defiance, that’s the inly reason I’m selling this one.

Add a trigger tech special flat face for $185

Trigger Tech Special Remington 700 and clones. No Bolt release. Comes with TT velcro patch

Used for 418 rounds on my Impact 737.

$150 shipped

Paypal f&f, Venmo

Can anyone iD this pickup from the window design?

Quit your bitching. Not even in the top 20. No duty to protect anyway. Sure can act like your #1 though

Cleaning out the gunroom. PayPal F+F. Add 3% for PayPal Goods and Services

Here's the prices shipped...

$50 MPA Cheek Riser (cut open the pad to unscrew)

$50 MPA BA Comp Night Vision Bridge with Pic Rail

$20 alone or $10 with something else - Crossbreed IWB Holster Hardware

$20 alone or $10 with something else - Expandable Shooting Stick

$SOLD KRG Heavy Flat Bag Rider

$SOLD Savior Scope Protector with Rifle Carry Handle

$SOLD Magpul AFG-2

$SOLD - One Tigris Extra-light prefilled shooting rest bag

$SOLD - Caldwell Brass Catcher


$SOLD - FDE Rear Squeeze Bag


$SOLD New KRG Whiskey-3 Competition Chassis for Rem700 SA (mounted but never fired) - this model comes with aluminum arca forend and arca spigot mount



$SOLD - Gray Ops Long Weights with M-Lok mounting hardware

$SOLD Area 419 14" Arcalock Rail with Integral Barricade Stop with M-Lok mounting hardware

$SOLD Sitelite Laser Bore Sighter (.22 to .50 cal)

$SOLD Magpul Pro 700 Folding Chassis Rem700 SA (Shaved down some of the polymer in front of the mag well so the Area 419 rail would fit snug)

I've come across a frustratingly large number of fired Alpha Dasher cases that will no longer chamber (easily) in the rifle from which they were fired.

For the cases that dont chamber (easily), I've found that the lip of the case neck will measure 0.273-0.2735 with a seated round...and my chamber is 0.274. As a result, chambering and extracting is not possible without a rubber mallet.

I've also found that when I neck size down in my 0.267 bushing, the lips and the body of the case neck (for the most part) measure out to ~0.267 +/- 0.0005. But, it's only when I go to the expander mandrel from PMA Tool that the lips get way over sized to 0.270 while the body remains 0.267

Reloading process:

- Wet tumble w/SS pins
- Anneal with AMP induction
- Bump/Neck size w/ 0.267 bushing
- Mandrel with PMA Tool 6mm expander mandrel (which im told is 0.242 for a final inside diameter of 0.241 after spring back)
- Wet tumble again to wash off lube
* note, this is 1-2x fired and dont require trim based on my measurments

So...my questions are as follows:

1) How to I remove the material from the lips of the case neck so that the entire neck is 0.267? Ive tried using the Lyment case prep express to chamfer the outsides...but it won't remove enough.

2) Is there a step in my process where I was supposed to address this?

3) Has anyone else encountered this with Alpha or other brass? I've also seen this relationship exists with virgin Alpha Dasher brass whereby there will be a ring around the lips that can measure 2-2.5 thou wider than the case neck body. See pics below.

4) What could cause the mandrel to create this fishmouthing of the case lips?

Anyone doing businesss with a company called “ primers 12 “ they are listing Federal primers LR match in stock. It seems a little odd that they are listed out of stock at other places. They only take some eft payment

I'm sitting here, minding my own business. I'm just reading some of the threads and drink a coke in a cup with ice. Then my brain decides to do something it rarely does, it starts to think. It notices my eye looking into the cup and seeing something that makes it go Hmmmm.

It now is asking a question, WHY DOES ICE MELT AT DIFFERENT RATES WHEN IT'S IN THE SAME CUP?

I noticed that ice melts at much different rates when it's in the same cup of coke. Some are almost complete melted, while others have barely melted at all.

To other brains out there, why is this? Scientist and engineers are welcome to explain too. But I suspect I'll get the Bubba's mind explaining it the most.

All are welcome.

Australian Defence has recently selected the AX-SR for its next generation sniper rifle.
This will undoubtedly disrupt the world supply of these weapons, as they furiously get our three rifles ready for delivery!!!

Your patience is appreciated