Hot

Groves733 · Aug 7, 2021

I am selling a Tikka t1x that i put together, it has a krg bravo stock, area 419 30moa rail, 20” lothar walther barrel, ats barrel tuner, mountain tactical mag release, mountain tactical trigger spring (set to 1lb), two factory mags, and a wiebad cheek pad.

this rifle was tested with lapua ammo at lapua (ammo is listed separately on this site) and shot well under moa at 50 and 100m. The rifle shot an average of .629” with 3 5 shot groups. (See highlighted results for 50 and 100m)

$750 + shipping to a ffl.

Groves733 · Aug 7, 2021

I have a partial case (3,950 rounds) of lapua center-x. All ammo is from the same lot.

$750+ shipping.

CSTactical · Aug 7, 2021

04/18/22: What's in stock below:
https://www.cstactical.com/Zero-Compromise-Optic
Zero Compromise Optic ZC420 4-20x50 MPCT2 $3,740.00 in stock !
Zero Compromise Optic ZC420 4-20x50 MPCT3 $3,740.00 in stock!
Zero Compromise Optic ZC420 4-20x50 MPCT3 NLE $3,890.00 in stock!
Zero Compromise Optic ZC420 4-20x50 MPCT3X $3,740.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT3X $3,980.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT3X NLE $4,130.00 in stock!

New options in stock!
(2) ZC527 Tremor 3 $4,455.00
(2) ZC527 M3X FDE $4,230.00
(2) ZC527 M2 FDE $4,230.00
(1) ZC527 M1 FDE $4,230.00

Zero Compromise Optic ZC527 5-27x56 MOA $3,980.00 PM or call for back order

Zero Compromise Optic ZC840 8-40x56 $4,150.00-$4,625.00 ETA TBA!
Pre-Order here: https://www.cstactical.com/zco-8-40x56-zc840-riflescope

Non-Locking Elevation (NLE) Turret Retrofit

"Competition shooters across the country have been steadily requesting a modification to our elevation turret that would disable the locking function. They want a non-locking elevation turret specifically so there is less movement or disruption to their shooting position while competing under time. Our engineering team has now fully tested out a retrofit and are able to provide this Non-Locking Elevation (NLE) turret modification service for our customers and dealers! For customers that currently have a ZCO product and that want this retrofit done to their elevation turret, they can simply send their scope in for this modification along with a check for $150 made payable to HPS LLC. Our staff will do a comprehensive inspection and cleaning of the entire scope along with the NLE retrofit. The cost includes return shipping within the continental United States. Customers outside of the U.S. we respectfully request they contact our customer service number at 208-435-4000 for a price quote including return shipping. As with any repair service, customers should remove any accessories, include a note requesting the service to be performed along with their full contact information and return shipping address."

CS Tactical will also be a stocking dealer of NLE ZCO's and/or can special order them for our customers.

Login to view embedded media

Dead Eye Dick · Aug 7, 2021

Lowlight · Aug 7, 2021

Login to view embedded media
Pretty soon, no drop or drift...

RIGGS9985 · Aug 7, 2021

Today I took out 2 of my rifles for some baracade pratice to try and decide which I will take to a match in a couple weeks. One is chambered in 22creed and sits in a foundation and the other is a 6creed in a MDT acc chassis. In addition, both impact737 actions, both impact by Stuteville pre-fit barrels, both bix’n’andy tac pro sport triggers, both area 419 hellfire brakes, both nightforce ultralight rings, both Razor gen2 glass. Going with the 22 creed! So light recoiling and is a laser beam! Photo and video below

Login to view embedded media

gr8fuldoug · Aug 7, 2021

TODAY ONLY - Call In Sale - Saturday 8/7/2021

It's one of those days that I am not thrilled to be working. It's BEAUTIFUL outside today and I'm here and tomorrow, when I am off, it's supposed to rain all day. Gotta make the best of a bad situation. Looking to be very busy today so the day passes quickly so please call us, 516-217-1000, and you'll be very happy with the deals you'll get. We will hook you up on what you're looking for. If you're in the market for Sport Optics, Cameras, Tripods, give us a call. Nothing to lose and everything to save.

We received a double shipment of a couple of Kowa items so we are blowing them out today:

Kowa TSN-884 Straight Scope w/ Kowa TE-11WZ 25-60x Eyepiece KIT reduced from $3,150.00 to only $2,750.00

Kowa Genesis 33 8x33mm Prominar XD GN33-8 Binocular reduced from $999.00 to only $849.00

Please make a regular stop at our Just Arrived section. You'll find recent deliveries of product listed here.

We've got MANY other deals going on so please just give us a call, 516-217-1000, to discuss the Optic, Camera or Tripod you're looking for and we will hook you up.

We have expanded our Super Deals - Clearance Specials section as well as our Open Box - Same as New offerings. Take a look

Check out our new Just Arrived Section and our Latest Sales Flyer

We appreciate all the orders and support. Please stay well and safe.

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

Have a great day & please follow us on Instagram at gr8fuldoug1

Thank you for your continued support.
If there is anything else that I can assist you with please let me know.
Doug
Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Srgt. Hulka · Aug 7, 2021

LMAO!

Login to view embedded media

Scrumbag · Aug 7, 2021

Hi folks,

Had a small scare the other day whilst reloading that might be a helpful reminder to people to keep safe and follow your procedures not being sloppy. Primer popped when being seated and flashed over into try causing other primers to detonate.

This happened using a Hornady Hand Primer

My set-up post incident

Close-up of hand primer – not sure where rest of pieces are.

Close-up of “flashed” primers (Note empty but dented cups)

And this is the resulting cuts to hand – fortunately they seem superficial. Blast also blew my glasses off my face and they landed ~6 feet away.

Fortunately I was wearing latex gloves so some protection.

Be careful folks and wear your eye protection.

(Just in case people are interested, didn’t notice anything different from usual. Cases were PPU factory on ~4th firing. Primers were Federal Large Pistol. Cases had been sonic cleaned and primer pockets checked prior to priming and I’d primed ~50 that session. This process has served me fine for ~3 years of loading)

Best wishes,

Scrummy

Maggot · Aug 7, 2021

Latinos twice as likely as white people to die from gunfire - Axios

https://www.axios.com › Politics & Policy

2 days ago — By the numbers: Almost 70,000 Latinos were killed with firearms between 1999 and 2019, 66% of them in homicides, according to the center's data ...

Krob95 · Aug 6, 2021

Scrolling through the ol Facebook when I come across this post. I have quoted it in its entirety below:

“Just curious if anyone here ever exercises the turrets on a new scope or on a scope with tracking issues? I’ve read of several folks on the accurateshooter forum that swear by it. Also got the info below off of 24hrcampfire.

"I recommend that you condition both turrets and then repeat a box test at the range. Conditioning is done in the following way:

Find the mechanical center of both turrets. That's the midpoint of the total adjustment range.

Start with the elevation turret.

Rotate the turret clockwise to the limit, then counterclockwise to the opposite limit. Repeat nine more times. Return the turret to the mechanical center.

Then repeat the same process with the windage turret.

Then repeat the previous cycle (elevation turret ten times, windage turret ten times) nine more times. Then you will have exercised both turrets 100 times.

I've used this conditioning process to cure scope tracking problems. If the scope has turret knobs, I always condition the turrets when the scope is new. I perform the same process for the power ring - it solves POA drift problems with the zoom mechanism in the erector tube.

The conditioning process takes a while and can create fatigue in your hand. I wear a leather glove and perform the process in groups of 20-30 cycles, then rest for a few hours.

I read about this process in an article in precision shooting. I tried it and found it to work."

Has anyone ever heard of “conditioning” turrets? Sounds easier to just run irons if this is the case.

Greenwood187 · Aug 6, 2021

Sealed. Ready to ship 2.5-20 milc

C623 $1750

Steel+Killer · Aug 7, 2021

This old vet doesn’t give a shit and damn it’s refreshing!
Login to view embedded media

JayLandoe · Aug 6, 2021

ZC527 MPCT1 for sale or trade. Mounted once but never fired. 3200 or trade for same with MPCT3 reticle. Sale includes the Tenebrex caps. Text at 509-389-0933

vegashelipilot · Aug 6, 2021

For Sale: 24 inch 6.5 creedmoor barreled action

Bighorn Origin action
Bartlein 1:8 twist marksman contour barrel by DMR LLC in Las Vegas (have receipt for barrel for potential buyer)

Exactly 325 rounds on action and barrel. Consistently shoots sub 1/2 moa by this amateur shooter. It will come with a Silencerco ASR brake.

SOLD

TacosGigante · Aug 6, 2021

I was in the process of building a dedicated LMT MWS upper for 6.5 cm. I balked at the cost of BCGs and then ended up seeing Titan Defense had the 6.5 CM DMR in stock. Somehow, when I started thinking about the parts I wouldn’t need to buy, the NIB parts I could sell, and the premium for not needing to wait I convinced myself that it made sense.

I was never good at math.

MOUNTIC · Aug 6, 2021

Brand new. Just arrived today from Altus after a pretty long wait. This is a Cs2 stock in Altus Highland camo. Gen 2 mini chassis. It is for Defiance Rem700 platform action and other rem700 platforms. Altus installed a 5 slot pic rail with QD cup built in. Comes with a 5 round magazine. I opened the box an hour ago and decided to keep my other stock instead. I paid 1445 plus shipping plus 55 for the pic rail. No wait here. Get it now for less. $1500 shipped. Firm. Not looking for trades.

Sold!!
Thanks!

Fret · Aug 6, 2021

Login to view embedded media

Maggot · Aug 6, 2021

Ive read about this stuff but didnt know it was that toxic.

Login to view embedded media

lfklshooter · Aug 6, 2021

Brand new Vudoo 360
Ordered, received,and haven’t fired a round
Changes from order sheet: installed triggertech diamond gold edition, Area 419 Arca rail, and barrel ended up right @ 20”
Don’t currently have the time and hate to see it sit
2 aluminum mags included
$3500 shipped

HeavyAssault · Aug 6, 2021

We got 25% back, now let's focus on the remaining 75%....LMAO

Kathy Griffin is home and recovering after surgery to remove half her lung

The comedian is on the road to recovery in the company of her pack of pooches at home.

www.foxnews.com

Having trouble using the site?

Hot

Hot

Filter

SOLD Tikka t1x sub moa capable at 100yrds

Attachments

SOLD 3,950 Lapua center-x ammo. All lot matching.

Attachments

Rifle Scopes Zero Compromise Optics new reticle MPCT3X and Non-Locking Elevation option announcement.

Optics TODAY ONLY - Call In Sale - Saturday 8/7/2021

Latinos twice as likely as white people to die from gunfire - Axios​

SOLD NF NX8

Attachments

Optics ZC527 MPCT1 $3400

SOLD Bighorn Origin / Bartlein 6.5 CM Barreled Action

Attachments

SOLD New Manners CS2 stock. Gen2 mini chassis. Altus Highland camo. Pic rail. Flush cups

Attachments

SOLD WTS Vudoo 360 Unfired

Attachments

Latinos twice as likely as white people to die from gunfire - Axios