Hot

mese341 · Jul 19, 2021

This is a new Curtis axiom with a 24" 1 in 7 twist 223ai threaded 5/8 by 24 $1500 and it's a heavy palma contour

The Durk · Jul 19, 2021

Selling my K624I with SKMR reticle. This is a Gen 3 unit but with the older solid crosshairs SKMR2 reticle.

TB scope covers included.

SP-4003B Spuhr mount.
I did use rosin on the rings as per what Spuhr prefers to use.

Shot it for 3 years on a standard gun range and one season of PRS. As to be expected there’s some scope knob finish wear but otherwise the glass is clear and the lenses are clean.

Asking $2200 shipped.

68hoyt · Jul 18, 2021

What is the farthest you have shot with your B14r and how did it do group wise ????

MK20 · Jul 19, 2021

I know defensive loads are going to be more scarce. I hunt waterfowl and like to do some practice shooting before the season starts with cheap target loads.

All those loads are gone or stupid expensive. Are all those components being redirected to production of “more popular” ammo? I don’t see such an increased demand for 3” 20 ga #2 waterfowl loads for example.

Am I missing something and when do you expect to see cannot come back for hunting shotshells?

reese3303 · Jul 18, 2021

*Selling because I do not use the rifle at all, and do not see any use in the future for the match built specifications*
Purchased from M14 Forum. Am diverting to a SEI Crazy Horse build, and also need a 45-70.
None the less, rifle has been fired ~ 100 times since purchase.

Gun book included, 2 mags. No sling. Asking $3,300 shipped.

Here is description from original ad circa 2019.

Smith Enterprise NM m14 “Pre 94 Receiver” for those in states that have restrictions.Rock Creek barrel, SA trigger group, H&R Bolt, oprod unknown “I have not disassembled this rifle” NM sights, all USGI parts. Assembled at Quantico by 2112 Jason Dupree, also have documentation “gun book” of matches this rifle has entered, maintenance performed when sent back to Quantico. The “TE 0” did not get a ME did not want to take off FH. Less than 300 rds through the barrel documented in the book.
~~Comes with original Krieger 1-12 heavy barrel ME-0, TE-0 , this barrel was removed and the Rock Creek barrel installed~~. JY Wolfe threaded on the Rock Creek barrel.. there are a few hard to find parts parts on this build with documented history.
This is the actual rifle that won the Arkansas High Power rifle State Championships in 2012.
I have fired 20rds through this rifle since buying it from Nez Rongero, cleaned the bore and put it in the safe. This is my rifle in my possession. 3,500 buyer pays actual shipping via UPS to your FFL or face to face in AZ.
Will consider a Partial trade .

Fret · Jul 18, 2021

if they actually had math, science, and real history classes. Can you have a negative GPA? I'm sure they just need to throw more money at it and that will fix it.

Post-Pandemic, Over 40% of Baltimore Public High School Students Averaged a 1.0 GPA or Worse

redstate.com

6mmMike · Jul 18, 2021

Like new S/A 10mm r.o. Elite. Comes with factory soft case, two 8 round mags and all factory accessories. Tritium white outlined front signt installed. Also comes with 200 rounds of 180gr brass cased magtech range ammo and 20 Double Tap 200gr hard cast hunting rounds. 1000 shipped to your ffl.

Maggot · Jul 18, 2021

It sucked. The best acting in the movie was by Silver the Lone Ranger's horse. Even the theme music sucked.

As VP or the Lone Ranger Fan Club of Berkshire Valley NJ, circa 1955, I was sorely disappointed.

HiYo Silver, Away.

PinesAndProjectiles · Jul 18, 2021

My son (17 and going to be a senior this year) has decided that he is joining the National Guard.

He’s signed all the paperwork and is going to MEPS and to take the ADSVAB on Wednesday.

So far, I know he’ll be doing one weekend a month through high school and heading to basic next summer.

He scored an 82 on the pretext for the ADSVAB for what that’s worth.

I know there’s quite a bit of military experience here (none of which attributes to me) and I’m hoping some of you can fill me in on what I need to know.

22-250ai · Jul 18, 2021

For sale is an STI EDGE .40 s&w hard chrome that Dawson has done their CRP package on. Only mods are the DVC grip, Brazos pro series tuned trigger group and a thumb rider/ledge. Gun runs 100%, no feeding or extraction issues. Gun was used to shoot USPSA limited major, has some minor wear. Package includes Double Alpha race holster and 4 mag carriers, 4 STI 140mm mags (2 with Dawson extended base plates), STI 126mm mag and around 1000 rounds of ammo (bayou bullets 180gr over tight group)

Only reason for selling is to get into a nice o/u for sporting clays.

$2400 $2200 for everything listed above, located in Whitesboro, TX. Additional mags (MBX) and range bag available for purchase as well.

Trades considered
NF ATACR 4-16 or 5-25
March 3-24
AMP annealer
22 CM brass
Vudoo w/ 16-18” barrel

Daddyhorn · Jul 18, 2021

Mk12 won’t feed and lock my hand loads. I have Douglas barrel, standard mil bolt carrier with a jp bolt. Hand loads are 77gr smk loaded into surplus standard mil brass. OAL is 2.25. Measured the case and everything seems to be within standards. Same rounds operate fine through my buddy’s rifle with a Daniel defense barrel. I know the tolerances on my barrel should be tighter. Bolt locks if rounds are manually loaded individually but will not lock if a mag is used. Also if loaded manually they are hard to eject manually. I’ve tried brand new p mags as well as the standard garbage ones. Also swapped the bolt carrier already. Must be something in my hand loads that I’m not seeing. Using RCBS small base two die set with Lee single stage press. Appreciate the help.

ReaperDriver · Jul 18, 2021

So, after much thrashing trying to get a good load for my .260 Rem gasser, I finally arrived on one. I worked up (actually worked down - long story) a good load in Lapua brass using the Berger 130 AR Hybrid, 41.0 gr of IMR 4451 @2790 fps. Had no pressure signs with the Lapua brass and under .5 MOA accuracy at 100 yds. I had a match coming up this weekend and wanted to use my Virgin Prime brass as I didn't want to use my new 1x fired Lapua and lose it. The Prime stuff is quite a bit lighter weight and the case volume is larger than the Lapua. So I didn't expect there would be any problems loading the same 41.0 grain load. If anything it should be slower, right?
I went out the day prior to the match to get some dope with the new loads in the Prime brass and sure enough the same load in that Prime brass was about 40 fps slower than the heavier Lapua. Accuracy was fine. But I noticed that some of the Prime brass had a significant amount of swipe while others had none. Also almost all of the cases get the plunger mark on the head. The picture below is all the same Virgin brass, all with the same load and shot on the same day. Some of the swipe actually have some sharp edges where it carved into the brass head.

So the question is 1) why am I getting this much swipe when it's a fairly light load?? 2) And then why do some show lost of swipe swipe while others are completely fine and not marked. And finally, 3) some of the virgin brass I just shot was reloaded for the match and probably 69% of them had very loose primer pockets. I would not have expected that with a lighter loads.

Is there something going on that I am not seeing? Or is Prime really that shitty and I can expect to toss right away??

TIA

HeavyAssault · Jul 18, 2021

I'll be digging deep into this matter. It's for all man kind.

Handball team forced to wear bikini bottoms instead of boy shorts

In what one Norwegian commentator called a “panties crisis,” the Norwegian women’s beach handball team’s rebellion against what they say is uncomfortable and degrading attire, has been put to an end.

www.foxnews.com

Mbvanstory · Jul 18, 2021

Vortex razor, great condition. Ebr7c reticle, mrad. Just cleaning out the closet. Have original box and paperwork. 1625$ No trades. Will ship via Ups.
“ I’ll take it “will take priority over pm’s. Feel free to shoot me a text for any questions , thanks. Discreet PayPal , g and s add 3%.
9014134258

Fig · Jul 18, 2021

Full retard

Oregon Initiative Petition 13 proposes to criminalize hunting

The state may face the end of hunting, fishing and trapping

www.gohunt.com

maggitas · Jul 18, 2021

Hello all I am looking to get out of 6.5 creedmoor. I am looking to sell all the below items together if possible and hopefully to someone within driving distance.

~~2 boxes lapua virgin 6.5 creedmoor small rifle primer brass still in box never fired~~
200 plus once fired Hornady 6.5 pieces of brass
2 8 lbs jugs of hogdon 4350. I loaded 15 rounds out of one of them the other is untouched.
Accuracy international 6.5 creedmoor 24 inch barrel pale brown with Badger Ordnance mini brake. round count is at 378
2 100 round boxes of Barnes match burner 140 6.5 projectiles
2 100 round boxes of Hornady 140 grain match BTHP 6.5 creedmoor projectiles
2 100 round boxes of lapua 139 grain scenar 6.5 grain projectiles
~~cutter and shell holder for Giraud trimmer in 6.5 creedmoor~~
Whidden sizer and Forster sizing die in 6.5 creedmoor
2~~00 rounds of American gunner 140 grain Hornady factory ammo~~.

I am asking $375.00 for everything pictured. I would like to do a FTF transaction in South Georgia.

Ruskin · Jul 18, 2021

Price Drop
All prices include shipping to the lower 48. PP F&F only.
The pictures do not show the Redding dies with lock rings but I will include the factory original Redding rings.

Whidden Die Rings QTY (7) with wrench - ~~$75~~ ~~Now $65~~ Now $60
RCBS 308 Precision Mic - ~~$50~~ Now $40 - SOLD to chris26
Redding Scale - ~~$85~~ Now $75 - SOLD to Bushersam
Redding 308 Win Instant Indicator only, no dial indicator included - ~~$100~~ Now $75 - SOLD to SirMilo
Redding 6.5c Instant indicator only, no dial indicator included - ~~$125~~ ~~Now $100~~ Now $90
Redding #1 Competition Shellholder Set - ~~$85~~ Now $75 - SOLD to chris26
Redding 6.5c Competition Bushing Neck Die Set with QTY (2) Bushings 0.289 & 0.290 - ~~$325~~ ~~Now $300~~ Now $280

tacops1 · Jul 18, 2021

Brand New Half Face Blades Crow Junior (no factory shipping box or sticker). Has factory white foam sleeve. Comes with knife and sheath. It’s never been used or carried. Rare black blade and carbon fiber handle. Support the Seal Team

retired knife maker he makes some awesome stuff .

$SOLDplus shipping clear to me

Foul Mike · Jul 18, 2021

Do any of you have any experience with these scopes? I had not even heard of them before but saw one yesterday where an Outfitter was selling hunts using their BOTW rifles and Huskemaw scopes. Seemed like Snake Oil to me, but I do not know, so bit my tongue and said nothing.
I have a bitter taste in my mouth that just doesn't seem to go away.

Mojo0254 · Jul 18, 2021

So though I have reloaded a lot I have never really tried to fine tune my loads for a rifle. I just loaded up a known working loaded and didn't try to make it better. As I prepare to build my 6GT I want to make it the most accurate load I can. The magneto speed sporter is $180 vs the $340 for a v3. The majority of my shooting will be done suppressed as this will really just be a plinking rifle and sometimes maybe hunting. My question is since the sporter model isn't really supposed to work with a suppressor I was planning on finding velocity nodes without the suppressor on and finding seating depth with the suppressor on. Then once I have a good combination of the two shoot without the suppressor to get SDs and ESs then run with the suppressor. Other than taking more rounds when I go to new ranges to check velocities and Zero because one would be without the suppressor and one with the suppressor is there anything else I should consider that makes saving that $160 not worth it? Thanks everyone.

Scrumbag · Jul 18, 2021

Hi folks,

Looking at developing a few different loads for different purposes and hoping to find a powder that will do it in Ramshot X-Terminator.

100 yd positional / moving target load - Whatever good deal I can get on ~55gr bulk back FMJ / BTHP / BTFMJ etc, most rounds will be this.

Longer range target load - Thinking 60gr Sierra Tipped match king as will be nice and stable in my 1:9 twist barrel (might do double duty as a fox round as well)

Deer hunting round - We have small deer here in the UK (Muntjac, Chinese Water Deer and Roe deer) and I like the 65gr Sierra Gameking SBT (Wonder if not obsolete though)

Non-Lead deer round - got 2 bullets to try with this. 55gr Nosler E-Tip and 58gr Peregrine VLR4?

Now, my thinking on this would be something with a burn rate that works for all those bullets and a ideally something that would stand being "thrown" for volume loading so a ball powder.

I had very good results with 65gr Sierra Gameking SBTs and Ramshot TAC but for 55gr FMJ it's rather slow and get very sooty necks.

What seems to give me full burn within barrel with the computer is Ramshot X-terminator.

So, I've got a pound of X-Terminator and planning on trying it out. Have I goofed? Should I be thinking of something else?

I'm using standard Magtech small rifle primers - anyone reckon a magnum primer might be better?
Anyone load any of the above bullets? Any advice gratefully received?
Nosler E-Tips on foxes / yotes: Too hard?

Best wishes,

Scrummy

ShooterM1 · Jul 18, 2021

Wtf? I was curious to see if shotgun primers were trickling back into existence so I did an online search to find out. I was pleased to see a few online sources had them albeit a little pricey but, ok, it is what it is. Proceeded to order the I find out these are not in the US but Australia and Canada...wtf? I thought this "shortage" was industry-wide due to new gun owners, increased demand, blah blah blah, and if so, no one would have any. Why do they and we don't? Realistically, I know the answer but wtf? Pathetic! My Sunday morning rant.

BigPrince · Jul 17, 2021

Having trouble using the site?

Hot

Hot

Filter

SOLD Curtis axiom 223ai ba

Optics WTS Kahles K624I w/Spuhr

Attachments

SOLD Smith Enterprise M14

Attachments

Firearms 10mm Springfield Armory range officer elite.

Attachments

Firearms STI Edge 2011 Dawson CRP *Price Drop 8/17*

Attachments

Optics 4.5x27 Vortex razor ebr7c mrad, like new

Attachments

Accessories WTS: Accuracy International 6.5 creedmoor package

Attachments

Reloading Equipment Reloading Bench Clean Out (Price Drop)

Attachments

SOLD FS: New Half Face Blades (HFB) Crow Jr. Knife Black /Carbon Fiber Rare

SOLD SOLD

Firearms STI Edge 2011 Dawson CRP Price Drop 8/17