Hot

dmuldrew · Jul 17, 2021

All right guys. Been around here since 2002. I read a lot and look at the pics in the pit. Last year around Christmas time I bought a fancy rifle and fancy scope from peeps on this site. First weather, then Covid, then life got in the way. Finally today all the stars and planets aligned and off to the range I go. Set up a target at 50 yds to get on paper. Removed the bolt, aligned the barrel with the bulls eye. Look thru the scope and the crosshairs are low. I cant get enough out of the elevation turret to align the crosshairs with the bulls eye. More pics added for scope and mount. Sorry about the size of the pics!

AI AXSR .338 LM. Any help, advice, guidance or sorcery is welcomed.

All was not lost. My AR15 with the Rare Breed trigger runs like a champ.

PatMiles · Jul 17, 2021

Policewoman Reported Being Chased by ‘Drone’, Turned Out to Be Jupiter

A Scottish policewoman who believed she was being chased by a drone was told that the pursuing object was in fact the planet Jupiter.

www.breitbart.com

Hilarious!

TommyD11730 · Jul 17, 2021

Is it feasable to bring something like a Lee hand press with me, some dies and reset depth at the range?
I load pretty long and im not compressed. So would it be worth the effort to say knock a couple tho off, shoot and repeat? Is the Lee hand press "good enough" to accuratly produce ammo? Granted i would bring my comparator, but if the press is wonky is it even worth the effort.

Thanks!

Getagrip_customs · Jul 17, 2021

Tangent Theta TT525p gen3xr reticle
Comes mounted in a spuhr 4001 Mount with top and side pic rails. Also has an anarchy throw lever. Not separating because I won’t be able to use it on my next optic. It was used last PRS season so there are some small blemishes around the turret knobs. But that is to be expected. The glass is in immaculate condition with no scratches or chips.

asking $4000
OBO shipped/insured
PayPal F&F or buyer pays 3% fee

only partial trades that will be considered would be specifically for a foundation centurion dark distressed inletted for LP Fuzion SA preferably. Any other trade offers will be passed on.

this scope is all ready boxed up and ready to be shipped.

text me for the fastest response at 801-420-3761

DJL2 · Jul 17, 2021

Looks like I'll be testing just how much bedding matters to my rifle project here over the next few outings to the range. The bedding didn't survive the first 45 rounds intact, sadly. If I were a betting man, I'd bet that the disappointing targets that comprised rounds 26-45 were the result of the bedding breaking/pinching under the action. The ARC Nuc doesn't have much of a tang. It looks like the Nuc's chunky butt just absolutely wrecked the bedding. You can see the pillar sitting underneath the bedonkadonk and with the action pulled you can see its outline. Interesting learning point there (for me, anyway). I also had to clean up the bedding around the recoil lug. It looks a little rough, but might just be functional.

Behold... there used to be bedding under/behind the tang... no longer.

TheGerman · Jul 17, 2021

Racial abuse causes German Olympic team walkout in match vs. Honduras

The match ended five minutes early.

www.bavarianfootballworks.com

Olympic game in football (not hand egg!) of Germany versus Honduras. Game is in Tokyo but the Japanese bitched out like a week or two before the Olympics and decided that coronavorus could spread at the Olympics...so no fans for any of the games or events.

Game goes on and around the 85th minute is stopped and ended early. Why you ask?

Because one of the German players decided to complain that he was 'abused' by verbal insults from one of the Honduran players.

Yes, you read that right. Someone bitched out and had the game ended early because of trash talk. Instead of 'abusing' the other guy back, telling him to go fuck his mother or even coming in a second too late on a rough slide tackle....nope, lets bitch out and end the game like a total faggot victim.

And I'm already seeing whining about how it could be racial/racism. LOL Do you even remotely know the shit that was said/is said on any sports field/court in any of the professional leagues on a daily basis? Hell, they had to edit out and/or wouldn't actually run what the Bull's would say to each other in that Bulls/Jordan documentary. The shit I've heard live at a Bayern game would make this faggot fucking die of an aneurysm. There have been players (the CEO of Bayern was a notable one) who would fucking scream, cuss and threaten your life and he was on YOUR team when he'd do it. He on occasion would also smack and push his own teammates if he saw that they were slacking or being lazy.

Yet some shit talk at the Olympics and lets fucking shut down, sit in the corner and be a little bitch. This is the millennial anthem. Let's definitely not fight back because the thing that was done is 'wrong', but instead, lets back down and act superior while in reality, being seen as cowering in the corner like a bitch.

Lowlight · Jul 17, 2021

This has been stated before, numerous times in fact, so now we are going to zero tolerance.

No politics in the informational sections. Period !

If you make a joke, post offhand political commentary in the informational sections when guys are trying to research equipment you will be permanently banned.

I don't care how funny you think it is, how harmless the comment, I am over it.

The election is over, if you want to keep the fight going do so in the designated areas only. We told your things are gonna get worse in terms of crackdowns on Right Leaning Comments by the media and government so not to bring attention to yourself or the site. We all know and this was discussed many times. Political Operatives are well aware of this site, we have been highlighted by Left Wing Media as recently as 3 months ago due to the nature of the political posts. I Offered up sections that would add a few extra steps for them to find it in an attempt to allow you comment without it being an issue.

But as I come back online I find you can't help yourselves, you have to infect other areas of the site. This is not a Political Action Forum, it's a informational one designed to help Shooters not politicians hold power. Let it go...

Any post in the informational sections that crosses into politics will result in a permanent ban...

Also as noted Full Membership privileges are being replaced. It will require a Supporter Account, we are removing the benefits of a Full Membership and changing the system to one of Supporter Accounts only to start posts in the PX. You can view and respond but will not be able to start a new thread without upgrading. This will level the playing field, prevent the misunderstanding of who can do what, and clean up the mess that was created trying to accommodate every past version of the membership.

Thanks

Satsoul · Jul 17, 2021

CAN THIS BE TRUE?

Retirement: The estimated costs of a comfortable retirement in every state in the US

The estimated cost of a comfortable retirement depends on the cost of living, which varies from state to state, as does average life expectancy.

www.usatoday.com

Bogatyrs · Jul 17, 2021

I am only shooting a CZ455 22LR up to about 200yrds max, do I really get any benefit from a BC? Mostly target shooting and some varmint shooting.
Thanks,

Da1t0n10 · Jul 17, 2021

I have a good condition GA Precision Thunder Ranch in 308. Under 1k rounds and in overall good shape. Sits in the safe and never gets fired. Honestly have no clue what the value of this rifle is, if I’m way over please tell me as I can’t find any recent sales or data on the rifle! Asking $3500 OBO shipped! I am interested in partial trades listed below are some of the things I would entertain, not interested in glass or accessories, firearms only! I can add cash to any deal that makes sense.

- MPX K newest Gen
- MCX Tac Ops
- MCX Canebrake
- MCX Virtus Pistol in 5.56
- Volquartsen Black Mamba
- Staccato XC
- HK SP5 or SP5K
- B&T 9mm stuff

let me know what else you have, worst I can say is no! Thanks for the help guys!

J McGriddle · Jul 17, 2021

Scheels has a few left. Limit 2, but free shipping.

Berger Long Range Hybrid Target Rifle Bullets

SCHEELS.com

www.scheels.com

mmlook · Jul 17, 2021

LeoSD · Jul 17, 2021

First post so here goes. Please let me know if I should change anything, or if I'm doing it wrong.

WTS Sako TRG 22 Classic .308
Previous owner told me he put 600 rounds on it, and I've put 180. He also had the barrel shortened and threaded for suppressor. Bought it to get into reloading, but it's not for me.

Comes with:
Pelican 1750 case
~120 pcs Lapua lrp brass, mostly once fired
1000 Lapua 167 Scenar Bullets
Whidden Full length bushing die and Whidden micrometer seating die.
2 Sako optilock bases
original Sako brake
thread protector

Theres a small chip/scratch under the stock, see picture.

Would prefer to sell all at once. $2750 Shipped to your ffl.

kevad68 · Jul 16, 2021

Impact 737R (Original owner of the Action) barreled in 6Creedmoor

25" 6CM Kreiger barrel (work done by V.E.T.S. Custom), threaded 5/8x24, cerakoted black
Can't recall barrel contour (barrel is 1.250" in front of action and 0.945 near muzzle), have about 600 rounds down barrel
Been shooting Factory Hornady 108's with great success, but I'm out of Factory and I was going to start handloading, so I did some Barnes 112 load development (see sheet) with my buddies dies since Barnes seem to be all that's available, but I just reaffirmed I just don't want to putz anymore with handloading (look at my other posts and you'll see I sold my AMP and other stuff) with components being so hard to get as well. Got plenty of ammo for my .308 & .223's so going back to those!
Jewel trigger with bottom safety set about 1lb on trigger hanger

Just paring down rifles, action looks mint (I don't even see a scratch or mark on it anywhere, one tiny scratch I tried to capture in last photo on barrel), did a few precision matches but mostly just steel plinking.
$1,750 SOLD shipped to your FFL. VENMO or PAYPAL OK. Not separating. No trades.

Cadex Defence · Jul 16, 2021

Our Pro-Staff Lauren Stroud in action at the Greystone Castle Sporting Club last week

rjacobs · Jul 16, 2021

I am a Mac guy...

I need a Windows laptop to use for tuning and other vehicle related stuff. Will probably also use it in the garage for streaming music, reading PDF's, etc...

I dont want to run parallels/bootcamp on my Macbook.

I have been perusing the Lenovo refurb site and think one of the Thinkpad L13's with an I3 processor and 4gig of ram is probably good enough for what I need. I dont think any of the programs I will be using are very resource intensive. Will be using HP Tuners VCM, Forscan, and probably another tuning program.

This is the specific one I have been thinking on:

New & Refurbished Laptops and 2-in-1s | Outlet

Check out our range of new and refurbished laptops now in stock at the Lenovo Outlet Store. Grab yourself a bargain, but hurry as stock is limited.

www.lenovo.com

I have also been thinking on this one that has 8gig of ram, better processor(i5 vs. i3) and is touchscreen(I dont know if its actually a Yoga model that turns into a faux tablet or not, but it seems like MAYBE it is). I dont think I need any of the features, except it might be nice if it IS a Yoga model for reading PDF's while working on the car(tablet mode vs. laptop).

New & Refurbished Laptops and 2-in-1s | Outlet

Check out our range of new and refurbished laptops now in stock at the Lenovo Outlet Store. Grab yourself a bargain, but hurry as stock is limited.

www.lenovo.com

Anybody got any thoughts on these refurbs direct from Lenovo? Im not interested in buying a refurb from a 3rd party only direct...

Dell also sells refurbs, but they seem to be more expensive than an equivalent Lenovo.

Anything else I should think about?

Nacho0077 · Jul 16, 2021

Edited.

thearmory · Jul 16, 2021

pakistani ordnance factory 308 belted. 20,000 rounds.
and lake city 50 cal belted 19,500 rounds with few hundred rounds of ap,api.
asking $1 a round for 308 and $3.25 a round for 50. fmj
Located in south Texas. if lot is purchased will deliver personally,
private sale no tax. 361648443four
361212714one
no low ballers

Schw15 · Jul 15, 2021

So buying my first suppressor and dont know much about them. I know the process as to wait time ect.
But can you ever sell them?
Has anyone wore one out?
Had anyone had issues with direct thread thunderbeast?
what is the best cover?
Do you guys keep strings down to 15 and under?
All new to me and i really appreciate the answers and help. Just trying to get as much info as i can

Side note decided on the thunderbeast ultra 9.

918v · Jul 16, 2021

Black Rifle Coffee shoot themselves in the foot…

Update from John Cardillo… Black Rifle Coffee called supporters of Kyle Rittenhouse ‘repugnant’ and labeled Proud Boys as ‘racists.’ &#8220…

citizenfreepress.com

B4forever · Jul 16, 2021

Sorry about all the acronyms in the title! Anyways, I’m in the market for a new precision rifle for LE/SWAT work. I’ve got my choice narrowed down to a Accuracy International AT-LE (.308 w/16.5” barrel) or a Desert Tech SRS-M2 (.308 w/22” barrel). The rifle chosen will be ran suppressed with Hornady 168gr match, and will see a significant amount of tripod time. I’ve had hands on time with an SRS-A1 and several AI’s but haven’t shot either. The features I’m looking for are:
-1/2 moa or better with factory ammo
-reliable
-factory support for the foreseeable future
-NV capable
-ARCA capable (will have to be aftermarket for the AI)
-portable
-adaptable for different shooters

In an LE context (Short range precision/positional work) what would you chose and why?

NoDopes · Jul 16, 2021

Resource Limit Is Reached

When I see this, I wonder if things have gone hot and comms have been cut.

Backup plan, post in gab "The panda is in the tree." So we'll all know for sure.

EotS · Jul 16, 2021

As it would pertain to 1pc mounts specifically.

Just mounting it in the ring setup, off of the gun, then put the entire assembly on the pic rail?

Seems like you're fighting 2 battles trying to level the gun and the scope.

Why isn't it common practice to put the ring/mount setup on a known, flat surface then just install and level the scope in the mount/ring setup? Short of some major mfg defects, the pic rail on the gun will be absurdly flat.

billt · Jul 15, 2021

But don't worry, it's to be expected. So don't be alarmed. Just think of it as, "Ball bearings falling from the sky". Wait until you read this bull$h!t, it's unbelievable! Absolutely zero common sense. People have to be out of their minds to get injected with this slop!

Most COVID deaths in England now are in the vaccinated – here's why that shouldn't alarm you

The latest UK data shows that nearly two-thirds of people who died of COVID between February 1 and June 21 had been vaccinated.

theconversation.com

Having trouble using the site?

Hot

Hot

Filter

Optics SOLD! Tangent Theta TT525P Gen3xr

Attachments

SOLD WTS/WTT GA Precision Thunder Ranch 308

Attachments

Reloading Equipment Berger 6, 6.5 LRHT

SOLD sold

Firearms Sako TRG 22/Extras $2750

Attachments

Firearms SOLD: Impact 737R Barreled Action and Jewel Trigger

SOLD SPF .22lr Prime

Attachments

Ammo Belted 50, and Belted 762

Attachments

Suppressors School me on suppressors

Maggie’s White Flag Coffee French Roast