Yeah, generally speaking, it's a leftist rag. But, this go around it does a good job at articulating the moving parts involved in the shooting war coming in the pacific conflict. We've already gone cold/hot cyber and bio.

Broken clock is right 2x a day.

Hey Hide,
Selling a scope I no longer have a use for, it is a Leupold MK5 HD TMR reticle 3-18 power in a Badger Ordinance Condition One mount. This will come with everything like new in the box. I had it mounted on a gas gun for maybe 200 rounds. Comes with a Badger Anti Cant Device (ACD) = level and sunshade/caps as pictured

$1650 shipped/insured

Nice one!

Almost new Atlas bipod setup. Was only used twice at the range.

• Atlas BT65-LW17 Gen 2 CAL bipod
• RRS BTC-Pro Combo Arca/picatinny clamp
• ADM-170-S QD lever clamp
• MDT spiked feet
• Atlas rubber feet

Complete setup for $375 shipped to local 48.

I accept Zelle, USPS Money order, or credit card (3.5% fee added to total if using credit card)

Gentlemen,

I have a quick question:

If you own scope caps made by Aadmount, have you had any durability/reliability issues?

I ran into a claim that there are issues with them. I have several sets that have not given me any problems, so I figured I should ask around and see if my experience is unusual or if it is par for the course.

Thanks for your help.

ILya

So I shot a ladder test today at 500 yards for my new 6.5/284

Lapua brass
Federal 210m
140 hybrid target
4831sc

I shot a ladder test today with a 7mph 2:00 wind

It shot really well but my higher charged shots are lower it’s almost like I shot it upside down compared to what I thought it should be not disappointed in the results just confused. Any insight?

Strong powerful woman gets her ass kicked by soyboi proving once again that even the limpest dick in town is harder than a woman. It was a pathetic 60 secs to watch.


Login to view embedded media

This looks really promising. Quick change barrel, folding stock, sweet chassis, adjustable magwell to accept AICS/AW pattern mags and we're not forced to buy red.




Action

• Changeable bolt head
• M16 style extractor
• Quick-change barrel system
• Integrated 20MOA Picatinny rail
• Integrated recoil lug
• R700 trigger compatibility
• Extended barrel thread tenon

Chassis

• Dust door
• Toolless length of pull adjustment
• Toolless cheek height adjustment
• Recoil pad fully adjustable
• Carbon fiber cheek piece
• Bag rider
• Adjustable height magazine latch
• Folding stock over bolt
• M-Loc pattern forearm
• Enhanced magwel design for AI pattern mags
• Barricade stop
• AR-style vertical grip
• Optional forward-mounted top rail
• Optional Arca Swiss rail designed specifically for HIT chassis

Barrel

• 416 SS 24”
• LT Tactical contour
• 5R rifling
• 5/8-24 muzzle thread with thread protector
• Open-source head space tenon specifications
• Drop-in barrels available

Calibers available

• 6MM GT
• 6MM Creedmoor
• 6.5MM Creedmoor
• 6.5 PRC
• 308 Winchester

Login to view embedded media

When, if ever, is the right time to check in on the progress of a build? Dropped one off in February and there was a 16 week lead time on the barrel. REM 700 action to get trued as well as threading and chambering. I’m not rushing, I’m just curious. My first foray into this.

Really Right Stuff TFCT-34 with Anvil 30. Used with no defects aside from a little dust and some minor finish wear on clamp as one would expect. Sunrise Tactical scabbard that’s a perfect fit, in excellent shape.

PayPal F&F or you pay fees, insurance is buyer responsibility if desired.
$1,300 shipped
$1,400 with scabbard, will only sell separately if buyer of tripod does not want it. Thanks!

Jury Selection RN

Coverage and Commentary w/ NATE the Lawyer​

Login to view embedded media

Without Lawyer Commentary

Login to view embedded media

For the love of that federal contract $$$, obey the king's jab mandate or suffer the consequence.

Good Afternoon Hide

Just want to remind, or bring to light to those who may not know, there are some big things coming through that could, God forbid ripple throughout the country.

The Kyle Rittenhouse trial has begun and are currently going through jury selection. You can watch it live here.

Login to view embedded media
Also, the Supreme Court is hearing a gun permit case, that will determine if gun owners can transport their firearm outside the home in some cases.


Tomorrow, we have a tight race for Governor in the blue state of Virginia, which has passed gun control laws 2 years ago when Democrats won everything.

Also, I am sure some of our local school districts are having their school board elections soon here. With Merrick Garland issuing a letter to the DOJ that marks parents as domestic terrorists', this is something we need to be active and watchful as well.

Goat

I know there is a dedicated LMT .308 MWS thread and some of you have your rifles. I have had one on order from V1 Tactical since October 2020. Promised delivery date was June 1, 2021. I still don't have the rifle.

I have talked to John several times at V1 Tactical. He can give me no updates and LMT is not providing updates either.

This would not be of major concern for me had I not already paid for the rifle LAST YEAR. Typically, when you order a product that is not in stock, you pay for it when it ships.

My fear is that V1 is over extended on these orders. Money has been collected and money most likely has been spent. When buyers start requesting/demanding refunds for undelivered products that have already been paid for, the company could file for bankruptcy and we are all screwed. I have seen it before. Anyone remember Tactical Precision Rifles?

So what do you guys think? Has anyone gotten their LMT order from V1????

Thanks,
Wooly

Believe I found a recent family portrait.....

KMW’s Zealot - LE rifle chassis was shown in the wild for the first time at the 2021 Precision Rifle Expo in Blakely, Georgia this weekend.







This chassis design reflects the same philosophies that I embodied in the very successful SENTINEL Combat Stock plus a few more that I could not execute in a fiberglass stock.

The Zealot places your barreled action lower in the stock than any other chassis while delivering totally new design features that no other existing chassis or conventional stock has.


FEATURES:

Z-LatchTM locking hardware - Totally new locking system for LOP and Cheek Rest adjustments. No tools needed. No loose and rattling components. Nothing sticking out to snag on gear. Nothing to loosen. Will not accidentally disengage during movement or while on the gun.



Captv-MagTM – This integrally machined feature is the same already proven feature in the new KMW DBM bottom metal. The Captv-MagTM system prevents AICS style magazines from over-traveling into the bolt path and binding the gun.

New Split Hemisphere forend design provides a totally enclosed handguard easy installation and removal of your barreled action into chassis while retaining the lowest CG of any chassis on the market.

I wanted to avoid any proprietary accessory attachment requirements so I chose to include the proven M-LokTM slot standard to allow you to configure as needed from the huge selection of M-Lok accessories on the market.

Main chassis body is one piece/monolithic to maximize rigidity and strength while avoiding a bunch of fasteners to hold the forend in place like others.

The forend is wider and blended to be more friendly to your hands while also sitting in and riding through bags.



A lot of chassis on the market look like the pistol grip was simply stuck there as an afterthought by leaving a lot of square edges and lines that are very unfriendly to your gun handling and comfort if you are on the gun for extended periods.
A good bit of thought and work went into the area where the grip merges with the Zealot chassis to insure your best hand position and comfort even if you add another aftermarket grip*.
*Accepts any M4/AR pistol grip including the excellent MDT vertical adjustable grip.


Accepts all Accuracy International AICS style magazines and AICS clones.
*Will also accept AW style magazines

Short Integral ARCA rail just in front of magazine well fits RRS Anvil and similar clamps.
I purposefully avoided an integral ARCA extending down the bottom of the forend. Future "competition" version may include one.

5 flush cup locations on back half of stock that feature GrovTec’s proven limited rotation, stainless material and black oxide finish. Much better long term wear than flush cup points machined into an aluminum chassis body. Two MagPul flush cup mount points with M-Lok anchors allow you to place front positions where you want.


SPECS

Chassis weight: 4.7 pounds

L.O.P. Range: 12.8” – 14” *

Folding Butt Stock on the L.E. model. Folds over most bolt handles.

Forend Length: 13.75”

Forend Width: 2.25”

Everything except the top hemisphere of handguard (6061-T6) is machined from 7075-T6

First offering will be Short Action (Rem700 and customs on same footprint) – Right hand. Next will be left hand/S.A. then Long Action Magnums.

Colors: Matte Black, O.D.Green or FDE hardcoat anodized.


More photos and information will be on the KMW website (www.KMWLRS.com) and KMW FaceBook page later this week.

Pricing will be announced within the next couple of weeks.

The Zealot – L.E. chassis should be available for ordering and shipping Q1 of 2022 which is getting here quickly!

./

Hey everyone!

The site has been updated, so let me know if there are any issues you see after the update and we'll take a look.

Price is $2,500 OBO. Venmo or Paypal F&F works. Add 3% if you want to do Paypal G&S. Price includes UPS Ground shipping.

CLICK HERE FOR PICTURES

Schmidt and Bender PMII 5-25x56
- Model Number is 677-911-772-9068
- Gen 2XR Reticle
- DT CCW Turrets
- Illumination and Parallax (LP)
- In very good condition. Includes Switchview throw lever, lens caps, and will ship in original box.

Trade Interests:
- S&B Ultra Short H2CMR
- Spuhr 4602
- DD MK18 Upper
- Forster Co-Ax

Thanks for looking.

Is the difference in sound reduction between standard and compact silencers more pronounced with short barrels? Specifically I’m wondering if an Ultra 9 would be substantially quieter than an Ultra 7 in a 16” 308 bolt gun.

Could be a great way to send a messge...if everyone did it.

Probably work better had they given it more time to circulate than just 2 days away.



Login to view embedded media

I have a chance to pickup a CZ 455, looks a lot like a 457 Pro Varminter. I haven't seen any 457 for sale in a 250 mile radius of my location.
Is the 457 worth waiting for over the 455?

For sale:

CCI 200 Large rifle primers boxes of 1000 x5 - sold (Twin Cities area only)

Sierra .264 140gr HBPT x 6 - $sold each
Bottom - Sig Sauer box of 150 once fired 6.5 creedmoor large rifle brass - sold

Left - Hornady Box of 200 once fired cleaned, 6.5 creedmoor large rifle brass - sold
Middle - Hornady Box of 160 once fired cleaned 6.5 creedmoor large rifle brass - sold
Right - Hornady box of 180 once fired 6.5 creedmoor large rifle brass - sold
6.5 creedmoor Lapua brass - gone bitches


Please add $3 shipping for each order. I accept PayPal Friends and Family and Postal Money Orders. Bear with me on timing as I am pretty sick at the moment.

Selling a Q Mini Fix.
NEW BARREL.
BOLT UPGRADED BY Q WITH THE LATEST INTERNALS.

I just got this back this week from Q. I had issues setting off CCI BR primers. So they upgraded the bolt internals to their latest revision. Also gave me a new barrel. So its minty fresh. Cant find any marks on it.

The black square is a piece of velcro for a 2 rnd holder. Im keeping the holder. You get the velcro already installed. You likely already have one waiting to put on it...otherwise let this be a clue.

The mags pictured are included and they work. Im not sure what mags it came with it originally. Since I dont have them anymore they likely offended me. I frankly suggest the lancers for all your 300blk needs. Smoke coyote lancers are my flavor of choice.

Ships with all the normal Q stuff in the factory box. These are not instock anywhere.

Now $3800 Shipped UPS or USPS. Your choice.

No TRADES. None.




p

Greetings everyone. I'm new to long range shooting and the Sniper's Hide Forum. I recently invested in a Tikka TAC A1 that is chambered in .260 Remington, and I'm loving it. After shooting 400 rounds through the barrel in about a month, I decided to clean it. Soon after I took my PVA Jet4 muzzle brake off, I noticed the carbon build-up. Well, after soaking a handful of 3 inch patches with Bore Tech C4 and leaving it on the muzzle for about 30 minutes, I proceeded to wipe off the carbon. As you can see by the image, the black nitride came off the crown. Given that I'm a newbie, I'm not sure if I actually "damaged' the crown. Can someone please let me know if I did so? Thank you in advance for providing insight to this issue.