As the title says, I'm looking to get some real world feedback from folks who use or have used professional money/investment management services. Based on the number of TacOps, AI and MRAD shooters here, there must be a decent few of you Alternatively if you work in this line of work, I'd love to pick your brain privately.

I'm pretty fortunate to make a pretty decent living and have always lived below my means. I've mainly been saving cash and maxing out retirement plans, but over the last several years have been investing in equities. My original plan was to split $XXXX per month between DJIA, QQQ and SPY index funds, with lesser amounts going towards some other ETFs and individual equities I thought had promise.

With the markets only going up and VIX staying low, however, I've been putting off the investments into index funds worried that a sharp correction is coming.

I've realized that it may be in my best interest to hand this job over to someone else and have been speaking with a JP Morgan private client banker and investment manager. They do seem to have put together a pretty solid plan for managing all aspects of my finances and attaining life goals but now we're at the make-a-decision phase and I'm a bit resistant to change, so getting cold feet. I was thinking some real world feedback may help me come to a decision.

Berger 153.5 .264 long range hybrid bullet/projectiles I have 600 total the 500 never opened and the 100 was opened but never used

Asking 325.00 shipped

Downsizing my TL3 parts and selling brand new Proof Steel Prefit in .223 REM competition contour and matching TL3 223/556 bolt face. I checked fit and headspace on these but never fired a single round. Not using so offloading the set. Makes a great trainer setup.

$600 barrel only
$115 bolt face only
$700 combo

Like new condition. Has 21 rounds down the pipe. Comes with 2x21rd mags and 1x17rd mag, along with the original case and paperwork. $525 shipped to the ffl of your choice. Venmo or Paypal FF. I’m not interested in any trades.

I am finally going to get into night vision so thinking the heard a little bit to clear some funds. I have an LMT that will stay in the stable and also have a Geissele URGI, DD RIS III 14.5 and a BCM MCMR 14.5 looking to get rid of two of them and only keep one. Which one would y’all keep out of those three?

The title says most of it. Mil and FFP, right side windage. This is a catch and release for me as I need the money for some other projects. Great condition and comes with the box and caps.

$1,400 shipped.

I have a new ruger precision 22... I know some shoot and some are so so... but Ive got around 100-150 on it now, cleaned it when I got it and once more after 100...

It will shoot cci sv in a very small hole at 50 yards, and then it wont... and then it will, then itll be so so.. then bad, then good... So it can shoot, but not consistently. I even tried the foil tape bedding crap, didnt really help anything.

Should I be looking at a new barrel to gain the consistency? Or should I run a few hundred down it first?

In before being called a commie fag.
No it doesn't mean we should have elected Camel-Toe or that sleepy joe is not a pedo sniffing goon.

Selling my FDE nightforce nx8 2.5-20x50 scope with the mil-xt reticle. Includes an American defense 30mm qd scope mount with titanium levers. Scope and mount in great condition. I don’t have the box for either item, but I do have the fde flip up caps for the scope that nightforce includes with the NX8. $1850 shipped for both

In addition to the beatings, defendants with depraved indifference, did nothing to restrain each other, did nothing to stop the beatings and failed to immediately order medical assistance for Mr. Brooks," the indictment said.

Also charged with GANG ASSAULT- this could be a new trend when a GANG beats someone to death no matter the colors they wear

A money quote from the article - Only took 96 days to decided that 12 men beating a handcuffed man- TWICE is murder but I guess better late than never.

17 corrections officers a few real cops and several medical personnel just stood around and watched -

We will be live on TheHide.TV tonight, so drop your questions and we’ll answer them

After dinner around 8MST

For Sale - New

-Desert Precision Gunworks custom works - No expense spared, long wait time
-6mm ARC
-MDT ACC Elite plus (Rem 700 Chassis)
-MDT ACC Elite Control Bridge
-Custom Cerakote - Dark Blue to White Ombre
-Zermatt Arms Big Horn - TL3 Action *DLC Coated*
-PPC Bolt head, AICS Mag, right handed, Comp bolt Knob, 20MOA Rail
-Krieger 26" Barrel, Straight 1.25" Contour
-Threaded 3/4x24TPI True Bore Aligned
-Custom DPG Muzzle Brake
-Timney Trigger - Two Stage
-DPG 1/2 MOA guarantee

NJ FFL to your FFL - Shipped $6300

My life has change after a long wait and I don't think I will have time anymore for PRS matches. Unfortunate. Hope someone can do this justice as the spring season starts.

First article I could find not behind a paywall- I’m not a regular nbc reader.

Be the way everyone seems to be shitting their pants over this guy - the the axe he has to grind against these people it should be Highly entertaining if nothing else . The first fbi director in at least my life time that’s not a bought and paid for criminal syndicate asshole .

Best part is the last portion of the article:

“Let this be a harsh, painful lesson for every EU citizen: your traditions, your culture, and your way of life are always just one refugee away from total annihilation”

This applies to the US as well.

manners eh1-a short action, bedded for an impact and proof sendaro
Grayboe bottom metal
Atlas pic rail up front
Also sending studs to run a full arca rail on bottom
$1000 shipped

In NY for selling guns and drugs - immediately released from custody.
I’d love to see everyone involved in this get arrested and charged with supporting a terrorist organization.

I wonder if normal native born citizens get the same treatment from cops and courts in NY on gun and drug charges ?

So I'm thinking on ", pulling the trigger" on this case trimmer, seems the reviews are good, & I'm a "but once, cry once" kinda consumer. I'm loading 300 WIN MAG, 6.5 PRC. I'm hoping for "no" buyers remorse & a good investment. Thanks in advance. Cheers.

I just got confirmation that my Tikka T3X super varmint in 223-1-8 twist has shipped. Anyone here one in 223? Or 308! Was wondering how you like it? Accuracy? Dislikes? Etc.

When attemptin to install an adjustable gas block last night I went to remove the screw from my original gas block and manage to snap the end of the hex bit in the set screw. The first set screw came out with no issue by the second one is stuck tight. I am looking for any suggestions on how to get the broke tip out of the set screw so that I can remove it. It was a Brownells magna tip hex bit if that makes a difference. I am going to call Brownells today to see about getting the bit replaced.

In a few words: with those tight tolerances, there is a certain way i have to push the bolt forward, otherwise i get some resistance to the point that the bolt gets almost stuck. If I push in a certain way, the cycling is fine and pretty smooth.
With the few bolt actions i used during the years (cz 527 and bergaras b14s) the bolt was much sloppier but almost in any way you run the bolt, it worked.

The bolt is clean and the action is clean, too. What i am gonna describe happens with and without lube.
The action is a defiance deviant ga hunter and the finish is the original black one that defiance applies on the bolt and on the action itself. It is mounted via the proprietary manners mini chassis on a manners stock. It uses aics mags. I asked for the standard tolerances that defiance applies, i didn't ask for the increased clearance bolt.

The action runs pretty smooth with and without the magazine inserted qhen there are no rounds in it. It just gets stuck when not pushing in a straight forward way, especially when applying leverage on the bolt, resulting in force being put more towards the side of the bolt.
When pushing straight or, better, applying some force towards the non bolt side, it runs smoothly.
With live cartidges it is more or less the same but the cycling is smooth only if i push in a certain way, there is less margin of error when chambering a round. If i don't push in the correct way, the bolt gets a lot of resistance. If i push strongly it works anyway, if I push slowly but applying the force in a correct, more centered or towards the opposite side of the bolt, again, it works.

Is this normal for a new custom action? Maybe i am just used to sloppy factory bolts which gives more margin in the cycling process.

I am trying to find a trajectory correction formula for metric units and mrad. I have no problem finding a mrad formula where it butchers mrads with inches and yards.

Mrads and centimetres and meters

Oh and the whole Ke. Eddy center is broke and in debt.

Seems all the money has disappeared….


Oh god… Interpretive dancers…. We’re all going to die!!!

Sirhr

Gentlemen

I have a handful of brand-new rifles for sale if you're interested, please PM me and I'll reply at my earliest. When you PM me leave your first name and a good contact number. I have two customers leaving the United States and will not be able to bring their rifles or silencers.

Tac 70 ( Manner's T4A stock ) in 338 ( Surgeon XL )

Delta 51 308 ( Surgeon 591 ) with Badger EFR
X-Ray 51 308 ( Surgeon 591 )
Tac Ops Green Hornet ( Ruger 77-22 )
Delta 66 300 Win Mag with Badger EFR on a Surgeon 1086 , mag fed
There is also a Tac Ops 338 Titanium silencer
I believe Qty. 3 or 4 Tac Ops 30 cal. Titanium silencers

There's also a Red Ryder BB gun with a PVC silencer with no serial number please don't drop a dime with the ATF on me

Serious inquires only please no tire kickers or ball breakers we are really busy at the moment...

Thank You
Mike R.

Selling Once fired Peterson LRP .308 (fired out of a AI)

$60 shipped per bag. (100)
Flat rate for all bags

With all my brass sales I’ve done, you will receive a few extras.