Seconds

babyguppy said:

I went to Midway..
Looked up XOOM and WOOX, came up with NO wood stocks like that

Click to expand...

Woox furiosa or furiosa ultra.

JRFirearms said:

Yours is another design i’ve seen done a few times, it’s like the original M40 clip slot but they have just made the pocket a little larger. Which makes sense as it would be easier to machine and allow the corners of the lugs to have clearance due to the radius.

It would be great to have some input from some 2112’s to see if they worked to any spec or just done it how the wanted.

Click to expand...

They had machinist drawings that gave the exact specs for the PWS Clip Slot to the receiver, but you are correct that the original M40 Remington Clip Slot was just a fuzz wider especially in the rear.

The Marines detailed when you fit a New Unertl Mount to an original M40 receiver, you only had to hand fit the rear lug in the back, like what Random guy shows above.

In contrast the Marine build guide details on the replacement receivers, you might have to file the sides on the Unertl mount as well to get them to fit.

The receivers were cut to spec, to the drawings. But the Unertl mounts were hand fit to the receiver for a tight fit.

Probably hacked or cloned account

GBMaryland said:

What’s the interest rate on those barrels?

Click to expand...

(meant to say this before @bohem response).

3.99%

I have a Bering Optics Super Yoter on my Night Stalker. To me, the adjustability of the buttstock makes it perfect for dedicated thermal weapon sights ( i.e., the eye relief ).

btt

samadisoulcrusher said:

The eyes!! Again!

Click to expand...

And another DEI hire.....

Holliday said:

Login to view embedded media

Click to expand...

Had a patient do exactly what this fool did only shot both his nuts off. Pro tip, check the chamber before pulling the trigger to release the slide genius

btt

Lawless said:

Dr. Patrick Soon-Shiong: You’re Being Lied to About Cancer, How It’s Caused, and How to Stop It - The Tucker Carlson Show | iHeart

Dr. Patrick Soon-Shiong is a surgeon who made billions inventing cancer drugs. He says that Covid, and the vaccines that didn’t stop it, are likely causing a global epidemic of terrifyingly aggressive cancers. (00:00) Why Are Cancer Rates Rising in Young People? (06:16) What Is Causing This...

www.iheart.com

Wow

Just listen if you are still interested in how covid is still killing us by covert action

Click to expand...

Covid?
Or vaccines?

Ok, so I have good news and bad news. The good news is I have the actual PWS clip slot Machinist drawings from the M40A1 build guide from the 1990's. I found it at the National Archives. The bad news is I gave my word I will not share the actual drawing. So if you have a question on a measurement, I can help confirm or deny numbers. I just can't in good conscience give out a copy, as I gave my word I wouldn't. You are welcome to PM me on it though if you would like.

On the actual M40A1 Clip slot (the one that everyone calls the PWS style) that style did not originate till the 1990's. The reason being before the 1990's, all M40A1's were just rebuilt M40 receivers. The original M40 receivers were factory clip slotted by Remington in the 60's, so there was no need for a PWS clip slot modifcation. It wasn't till the Marines started to buy new receivers in the 1990's that the new style clip slot came about.

Also just a comment, I have not seen any Unertl Mounts with the last four of the serial stamped on the bottom of the mount. I'm not saying it couldn't happen, but all evidence I have seen shows they were marked on the top.

The whole numbering of the Unertl mounts seems to be a late modification. Most of the original mounts I have seen, even ones still on M40A1's in Marine inventory were not marked with the last four. It is also not mentioned in the Marines docs till the mid 1990's. Even interviewing several 2112's who were there for the whole M40A1 build program from the beginning till the end, they said it only came around late.

So if you are building one, unless you are going for a later style build, I would not personally mark the mount.

Now if you want to mark it, the Marine manual on building the M40A1 from the 1990's states, " Stamp the last 4 digits of the weapon serial number onto the top frame of the mount centered."

For instance, here is an original mount that was likely marked when serial 221,240 was rebuilt in 1998.

More companies should make AW compatible actions. Feeding rounds from a AICS mags feeds and sounds like garbage. Then you have some of the crack smokers out there that prefer the AICS mag over the AW mag. Those are the people who think Leupold is a top tier scope.

rydah said:

I spent enough time with my zcomp and my mates 540 side by side looking at steel at snake river to have a pretty good idea how they stack up for me.

Pretty much the zcomp is better image wise. It’s close but the biggest thing was the zcomp has more contrast which helps with definition and resolving details a bit better. The 540 is a tiny bit softer image and looks a tiny bit more washed out. Edge to edge is better on the zcomp also.

What the 540 does really well is the obvious fov increase. I shoot on 12 power mostly with the zcomp for the fov I feel most comfortable with. Shooting with the 540 i was running 18 power and had the same fov as the zcomp. So that was nice. The image is larger on the 540 also, the image is a bit brighter and you see less of the eye piece. It’s really impressive and an enjoyable experience to be behind.

So for me, even though it’s not quite as good as the zcomp image wise, it’s close enough that the larger image, brighter image and bigger Fov, overshadow the small compromise you make in image quality. Plus I really enjoyed the parallax adjustment and left sided windage of my old 525, so I’m going to sell my zcomp and try a 540.

I think I’ll benefit from higher zoom for same Fov, the larger image etc. Plus I like the reticle a bit better. So we will see in a few months after I’ve had one for a while if I still feel the same way or if I go back to a zcomp and it’s superior image, but it’s a really good scope.

Click to expand...

If you need the K540i hit me up and/or if you want an updated ZC527 10MIL M1X NLE let me know -Richard 916-628-3490

I'll add from personal experience that "she" is wanting a reaction from you, actually baiting you for it. By walking away you not only save yourself more possible trouble later, but also you actually "win" that interaction. Its mostly about control, and if you can control your emotions and not react, you will see her lose her control that she so desperately craves. So in reality, its not being a pussy at all. Its being smarter than your opponent.

168BTHPM said:

I know he will find this video. He sees everything.

Login to view embedded media

Click to expand...

She eats one meal that takes all day. Consumes a whole cow.

What exactly is a road match? All my matches are at least 3 hours away, and once it's 4-5 hours I'll usually camp the night before.