NIB never mounted
3.6-18 Tremor 3 FDE

$1500 shipped and insured.

No trades.

Thank you

NIB never mounted
5-25 Tremor 3 BLK

$1600 shipped and insured.

Box has some damage. Otherwise there are not other blems.

No trades.

Thank you

I have a left hand Foundation MG2. Comes with Foundation full length Arca rail, Hawkins M5 DBM, Weibad cheek pad, and full Tungsten weight kit. This was originally inletted for a Vudoo but has since been made to fit a Deviant Defiance. I will not separate this kit unless the stock sells first. Only trades would be an MCS-TCS or a Greyboe Phoenix 2 SA.

Asking $1200 shipped.

I have the CMMG 22 conversion kit for that AR-15 and I'm looking for an AR-15 barrel chambered for .223 with a 1:16 or 1:14 twist.
Does it exist?

6.5 PRC only



Just starting a load work up. I need your favorite accuracy loads.

Please provide:

long or short action

Bullet weight and Mfg.
Powder and charge in grains
Cartridge OAL, yes OAL. If you want to include ogive list the comparator used.
Primer
Brass Mfg.
Velocity
Barrel length
Freebore of your chamber if known

Comments on function, brass life, accuracy, temp stability.

Today I ran 50 fire forming loads for new ADG brass. The idea was to use up bullets and powder I don't like while fire forming.

Short action Mausingfield M7
Win. Staball 6.5
54.5 gr x 35
Norma Golden Target 130gr Advertised G1 .610 (I plugged in .585 to Strelok Pro) hit centered at 500.
Seated for max mag length 2.960 This shot the best @ .875" for 5 avg speed 3090
Seated 5 @ 2.947
Seated 5 @ 2.935
avg speed 3090
checked several five round groups for velocity out of the car rounds were cool 1st group avg 3090 SD 9.5, then 3115 SD 22, then 3085 SD16.2. Temp stability seems pretty good.
New ADG brass. Chamfer od/id & mandrel with .2625
CCI #34
26" Helix 6/ 8T Braked
9lb gun

3 x 5 round ladders with Berger 144 LRHT seated for max mag 2.960
Vit N565
57.4 = 2942 SD 11.2 1.1"
57.9 = 2972 SD 13.9 .875"
58.4 + 2997 SD 19.3 1.3"

I'll be loading the 156 eol in this fire formed brass with N565 next.

I have an Athlon Chronus BTR 4.5-29x56 MOA reticle scope, with rings, for sale.
It was mounted on my 6.5 CM precision rifle and shot accurately out to 1240 yds.
It is in excellent condition with just a few minor use marks.
I am selling it because I have started shooting precision long range more and have decided to move to a MIL based scope.
This is an excellent scope that will serve you well if you shoot MOA.
I do not have the original box.
Price is $750 shipped, if needed.

Selling a CMMG Banshee in 40 S&W. Excellent condition. Low round count. Comes with 2- 24 round Glock mags and 4- 15 round Glock mags. Ammo available for sale separately. Optic not included. $950 shipped.

ACE Skeleton Stock with A2 Buffer Tube, spring and buffer | $100 shipped

Fixed A2 Stock with A2 Buffer Tube | $80 shipped | SOLD

Both have been rattle canned so they are more cooler.

Mounted but never seen the field. DNT The One MIL Reticle. Comes with everything as new. $550 shipped.

Binocular Block:
Tired of trying to mount your binoculars to your tripod with the "one size fits all" clamp? I have designed 3 different sizes one for 32MM, one for 42MM and another for 50MM objectives which cradle your binoculars and fit like they should. These have molded ARCA rail bases to mount without having to use any adapters and have 2 threaded 1/4-20 holes for attaching a wind wand or other accessory. Bino blocks will ship including the velcro strap and buckle as shown with everything you need to mount your binos. Available in black, gray, safety orange or safety green. These weigh approximately 1.2 ounces each.

Binocular block in any size or color for $35.00 each shipped


Bipod Buddy:
After getting tired of setting my bipod down to shoot a stage and then trying to remember where the heck I left it, I finally designed a simple yet effective way to stow your bipod, rail mounted bag or anything with a Arca mount directly to your tripod. These have a built-in stop so you can slide your bipod over the top and the buddy holds it in place without the need to tighten it, includes the velcro strap. These weigh approximately 0.5 ounces each.

Bipod Buddy in any color for $20.00 each shipped


Wind Wands:
I made a few of these for shooting local matches and now offering them for sale to members of this forum. These are made from carbon shafts using stainless steel ball bearing swivel, 1/4-20 threads and with the included thumb wheel they weigh 1 ounce each.

Wind wand as shown for $25.00 shipped

Order any 2 parts and take $5.00 off, order any 3 parts and take $10.00 off! Also willing to design/print any parts you might have in mind just shoot me a PM. These parts are 3D printed right here in the USA and should you want any parts personalized with special colors, text or logos that is also an option.

I have 3 new parts for the Aeroprecision Solus chassis all printed with PETG, priced by part as well as package offer all shown below:

Solus Thumb Rest: Fits most of your thumb...not just half of it! Printed solid 100% PETG asking $20.00 shipped. (Uses stock hardware)


Solus Bag Rider: This is designed to form against the buttstock in high fill count PETG asking $30.00 shipped. (Uses stock hardware)


Solus Mirage Shield: Fits up to 1.25" contour barrels and printed in high fill count PETG asking $50.00 shipped (Comes with stainless hardware)


Package deal for all 3 items: Thumb rest, bag rider and mirage shield asking $80.00 shipped with payment via PPFF.
Printed right here in the USA and custom colors and/or personalization are both available for a little extra time and fees.

Selling a like-new Dissent in 5.7-28. Midnight Burnt Bronze. Optic not included but for sale separately. Has been fired 10 rounds thru it. Ammo also available separately. Ammo available. Comes with 4 mags. $1450.00 shipped.

Didn't see a thread for this new lightweight, minimalist chassis. $300 gets you a chassis for a R700 receiver, which doesn't include the farend (forend) or stock/brace. I am considering pre-ordering one and doing a 12", 6.8 SPC, SBR build. I think it would make a great rifle to carry when cruising around the lease.

Update: 02/02/21 Blackcollar Arms isn't making much headway on producing a stock. I would recommend checking out MDT and JTAC for a lightweight chassis as well.

What is your go to?

As the title says I’m looking for a 24” Proof carbon pre-fit Sendaro 6.5 CM for an Impact 737. It’s the last piece of the puzzle to finish up my NRL rifle.

New preferred but let me know what you have if you’re interested in selling.

Thank you guys

Unused, just mocked up.
Vltor upper: $225
Noveske 15” NSR Gen3: $225
Ballistic Advantage 13.9” mid length Hanson: $100
LaRue Flat Trigger: $100 SOLD

$400 for all the above. PayPal F&F, CashApp, Venmo. PM all questions or offers

Below has less than 100rds fired. Is my sbr upper which has been in storage for the last 7years.

10.5” FN CHF barrel 1/7: $250
-FSP
-A2 flash hider
-standard barrel nut

Centurion C4 Cutout: $200
-Carbine length
-magpul panels and hand stop

WMD BCG: $100
-Nickel boron coated

PSA upper Receiver and milspec changing handle: $50

NO OPTIC, IT BELONGS TO THE WIFE

Whole 10.5” complete upper $400 shipped. Sold pending funds


Trades:
Carbon fiber or steel barrel blanks for bolt guns
Prefits for TL3 or Zeus QC
TL3 Action wrench
Maven RS.4 5-30x56 FFP CFR-Mil
Riton Conquer 7 PSR
Bushnell elite tactical (g4, h59, T3)
Zeiss S3
McMillan a3a, a5a, xm3 short action stocks
700 foot short actions. ARC, Curtis, Impact, Surgeon, Zermatt/Bighorn

Noveske, vltor, BA 13.9, Larue stuff

10.5” upper stuff

As title states, freshly built 22 creedmoor with 0 rounds fired. I've got too many irons in the fire at the moment and I have no time to start on another rifle.

Trued/blued rem 700 action (older action)
18" 1:8 twist BSF carbon threaded 5/8x24
McMillan HTG stock
Brand new bdl bottom metal
Precision Armament bolt handle
Factory 700 trigger @ 2lbs
6lb 10oz as pictured

All metal cerakoted graphite black
Stock is black with gray splatter and red webbing.

All work was done by Randy Gray at Adairsville Armory here in Georgia except the spiral bolt which was done by LRI.

Super nice and handy little rifle.

I've ran up to 80g bullets in my other 1:8 22 creed with zero issues. These little jokers are fun to shoot and they do some work on the varmints!

Looking for $2400 shipped and insured.

Not really looking for trades at the moment.

3 available

RH no bolt release Special Songle Stage PVD Curved Triggers

$160 each shipped - no trades please

Used V2 I have been running for a few years. A few things to call out.

1) I don't have any of the small screws used to add the spacers and lock them down. I just added the spacers and ratcheted the tie down without issue.

2) The strap for the tie down to a barrel (or suppressor) is missing a metal bar that made it easier to tighten. It broke a few years ago, however, the strap still works fine without it. I just pinch the strap against my suppressor and tighten it down.

3) Last time I used this I got some funky readings when the humidity and cold were present. The SD was consistent, but my velocity swung by 100fps. It was a day when the air temp and humidity changed massively and the strings were shot before and after the change. I had never seen that happen.

Given all of this and the fact it's well used, if someone wants it for $75 shipped it is all yours. It has served me well from 22LR to 300 PRC.

Below you will find some items for sale that are broken down into separate lots for ease of organization. All photos are attached to this post! PM me with any questions.

SOLD! Lot 1: Asking Price $125 Shipped
Masterpiece Arms - MPA BA Internal Weights
Gray Ops - MPA BA External Weights (6 Weight Kit) Gray
All hardware is included.

Lot 2: Asking Price $150 Shipped
Misc Brand (Mostly Hornady but some Federal and Lapua) 1x Fired 6.5 Creedmoor Brass - Cleaned and Bagged
Qty of about 275-300 Cases - Unprimed


View attachment IMG_5343.jpg

I have a set of whidden dies for 300 norma 250 shipped

i have 95 once fired cleaned brass and 9 once fired primed for 225 shipped

Apologies if this has been covered, but couldn’t find anything.

I am consolidating a few former posts into this one and thinning things out:

1.) MDT HNT 26 | Virtually new, never used to hunt | With Folder & Arca forend | Black Carbon.
$1,275 shipped in factory packaging | SOLD.

2.) McMillan A3 Short Action | Built & bedded for Impact Action by TS Customs with his light weight adjustable hardware & pristine bedding & pillars | Area 419 12" Arca | Badger Ordnance M5 DBM all included.
$1,200 shipped.

3.) McMillan A3 Long Action with badger EFR | 34% OD, 33% tan, 33% black | Built for Remington 700 | Professionally bedded | Hawkins M5 DBM cerakoted in OD Green included | Non CIP.
$1,350 shipped.
$1,250 shipped.

4.) Nightforce NX8 4-32 x 50 MIL-XT | FFP | $1,900 shipped.

5.) Nightforce Medium UltraLite 1.00" x 30mm Scope Rings | $140 shipped | I want the NX8 and rings to go together. May accept separate offers.

6.) Nightforce UltraLite 1.125" x 34mm Scope Rings | $140 shipped | SOLD.

7.) Badger Ordnance Remington 700 Recoil Lug alignment Tool | $40 shipped | SOLD.

8.) Impact Precision Short Action 737R | Right Hand | Magnum Bolt Face | Has some rattle can on it that will wipe off with acetone | Some pics show a custom bolt knob on it. Will ship with factory knob | $1,250 shipped to your FFL.

9.) Badger M5 Enhanced Short Action DBM | It is included in the McMillan A3 stock line, but will sell separately | $225 shipped.

Will probably be adding more as I go.

Anyone have a spare ammo novel laying around before i buy new, either Cole tac or Walsh
***** found one, thanks everybody