Selling my first PRS chassis Chassis was purchased new from Sportsman's and the Rail was bought direct from Area419.

MAGPUL PRO 700 CHASSIS: HAND PAINTED FLECKTARN PATTERN.
Made for Remington 700 short action clones. PRO 700 Chassis. Originally black. Sponge painted by me. Durable 4 layer Matte Clear is holding like a pro job. Can supply colors and the process to the new buyer.

NOTES:
*Chassis punches above it cost and class.
*Can be swapped to left hand in under a minute.
*Easily Held a comp contour Proof SS 26". (NOT INCLUDED)
*Looks great and functions even better!
* When fully kitted out, it's lighter than what you'd read in the internet.
*Great hunting chassis or PRS learner rig.
*ZERO operational issues. Like new!

SPECIAL ADD-ON'S:
*Comes with a custom cut MAGPUL PRO Night Vision Bridge. Work done by a local smith/metal shop. Allows for use with 56mm scope sunshades now. OEM style would need to be removed. Hand-painted to match the chassis. No additional charge. ($150 value)
*Comes with new and never used 10 round Magpul AICS Magazine. OEM was a 5 rounder. Cut from package for fit and pics. Never fired.
Will ship in OEM packaging with all OEM hardware and accessories.

PRICE: SOLD


Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

i'm trying to find out what's required to use a longer cartridge in a long action receiver for 3.850" mags. from some understanding the bolt stop needs to be changed to accommodate for a 4"+ oal. does the port need to be opened up also? then there's the bottom medal and stock fitment for the change or just a chassis or stock that accepts said length(s). so far i'm just looking at bolt faces of .590" and maybe larger diameter wise in .640 or .810" range. not specific on which cartridge will be used for now?

I have a Atlas prs bipod for sale with Area-41 arca clamp and Area-419 barricade stop (new in bag) asking $275.00 plus $10.00 for shipping if you want insurance thats on the buyer . Will take pp/ff USPS money order or check will wait for check to clear .

Selling SRP Peterson .308 brass
Fired out of a ai, cleaned and bagged.
Need it gone


447 pieces of brass for $300

Greyops large side weights, m lok. I got this for the original Mpa Matrix chassis but can be used on any m lok chassis.

Sold

PM if interested

Xray 51 chambered in 308.

Purchased this last year and put a box of ammo through it. With the 3 round test group it has 23 rounds on it.

Nothing wrong with the rifle. Only imperfections are from me taking it out of the safe, it sliding over and knocking another rifle over.

I’ll send the test group pics if you PM me. You can get my cell via PM too.

It’ll ship in the case it came in.

$7000.00 USD shipped and insured.

I have an MDT cert for 50% off. I just bought 2 chassis earlier this year so I wont be needing it.

MDD ACC Elite is currently 1600 + tax and shipping so this cert has an 800$ value. After purchase of the certificate, you'll save 500$.

Let me know!

So, I purchased this scope brand new and has lived its entire life on a 338LM. It has tracked very well; the glass is excellent, and I have had no problems with target engagements out to 2800 yards. It has always been mounted in ARC M10 rings (as shown, included) and shows very little to no ring marks. Includes the scope, rings, sunshade, and Alumina Flip-Back Lens Covers (119737 and 117611). Feel free to ask any questions or request additional photographs.

$2000 $1900 shipped CONUS. PayPal F&F preferred, but I will cover the G&S fees if the buyer wishes to go that route. Other payment options can be discussed, including Venmo, Personal Check, MO, etc. Checks will be held until clear or cash in hand.

Specs:

Bought these last year. They’ve been stored in a climate controlled reloading room.
4 New Sealed 8lb jugs
$375 per jug
2 for $725
Thanks for looking
Cross listed

5H Sold

Super Cal no mount

Selling Element Theos in mils. Asking SOLD shipped and insurance can be added at the buyers expense. No issues or damage to glass or body. Will come with all the original accesories. Mount and level not included. Paypal F&F or Zelle. Not looking for trades at the moment.

SOLD

BNIB Nighforce ATACR 4-16 FFP MIL-XT (C615)

Purchased brand new from Eurooptic last month.

Never mounted or in a set of rings.

Price: $2175 Shipped Insured

Payment: Zelle or Apple Pay

I also have 700+ on ARF (same handle)

No trades

I have a custom long-range Remington 673 black powder rifle in .45 caliber. The barrel is 26.5 with a 2" muzzle brake. I traded for the rifle a few years ago and never really used it. The rifle is accurate out to 500 yards.

I'm open to offers as I can't find a compatible rifle for sale or that has been sold, so if you're interested, make an offer. I'll ask $375 as just a random number so this ad has a price.

Like new, rarely used. Sinclair bullet concentricity gauge with dial runout indicator. Really nice piece of tooling, very satisfying to watch the needle barely move after all you put into your seating process lol.

SOLD, Venmo or PayPal FF/NN only.
DM if interested, thanks!

Selling a pair of Grey Ops BR AW magazines. Mags are in perfect functional condition. They have been used in several matches. These mags do have the updated followers installed.

$300 Shipped for the pair
PayPal FF or you pay the fees for G&S

PM if interested

One brand new unused Area419 and one two-pack of brand new unused Frankford Arsenal reloading case trays for 223 Remington.

SOLD

My wife just got me a new Dillon 550c as a gift. Defiantly no input from me hahaha.

I plan to make a video series on my journey with this press exploring some of the different methods people have been using to get single stage accuracy out of their progressive presses.

So out of curiosity, those of you who have been down this road before... what have you found to give the greatest improvement in accuracy (at the bench and on paper) over the stock press. If you could attempt to give it a % value based on increased accuracy or decreased group size. What would it be?

I plan on testing as many methods and modifications as I can and ranking them based on my results but I'd like to see what the opinion of the hide was before I started.

Just like the title states. Fresh off brown truck from ZCO for Illumination adjustment and cleaning… 2950 optic or 3250 optic/6002 spuhr mount TYD OBO
Only Trade towards a AI AT-XC or ZCO 840 2x/3x

Aero solus action and 24 inch stainless fluted barrel from aero as well, shoots .5-.75 with an old load from my bergara.
Stock is an ag adjustable in carbon rogue, with bottom metal. NO trigger. 1600 shipped can add a triggertech special silver flat for 150. Split prices would be 850 for barreled action 800 for stock and bottom metal Shipped individual to FFL on the BA no scope or bipod. Will sell with epl for a bit more

Looking for action wrench for zermatt arms. Needed for left handed action. Let me know if there are any out there

Edited 04/27 to add - Per Steiner Customer Service, there is no plan to introduce a rail mount option. You're limited to "slip on" or "clamp on" or "how do you say Germans have a twisted sense of humor" mounting options.

Greetings all. As stated in the C35 Gen 1 thread, I was primed and ready to jump on the grenade. When the Gen 2 dropped and I ordered it the morning after I saw it appear on Gunbroker.

The unit comes with batteries, cables, a charger and no way to mount it on an optic. The rail mount is not yet available, and I can't wait till it is because while the slip on is quite adequate, you're limited to a very specific bell diameter without swapping about. I bit the bullet and bought a Burris Smartclip 59mm for my VX-6 3x18x50.

Initial impressions are positive. Unit takes two 18650s. They can be hot swapped and it only needs one to run. I only did that trick once because with two in, I was never in the field more than ~5 hours and they were never in any danger of running out.

Start up to image is about 10 seconds. Menus is easy. Zeroing was easy for me - I got lucky and everything was in enough alignment that I was minute of pig from the first shot. The VX-6 is a surprisingly good host - from what I'd read on the interwebz, 6X is where pixelation is so bad you can't make out a pig from a manbearpig. Horseshit. I shot most groups at 18X. Caveat - the eyebox error is about .0001mm - but, sitting on a cart that has a rest built in, you have that luxury. In all seriousness, about 8X is where you go to noticeable pixels and at 18 you're maybe 16 bit resolution BUT, more on that later.

I was extremely skeptical about the slip on clamp. I stand corrected in that the system works somewhere between well enough and very well. If you're willing to put in the time and work at getting repeatable to the point you're zoomed in to 18X and referencing exactly where your reticle falls against, say, the menu screen - results can be very very acceptable. With the limitation of trying to get it moving pretty quickly, results are still minute of pig with no worries.

In practice, in the field, we had a textbook coyote hunt. I'm using a 20" Grendel with Hornady 123 SSTs. Put a pig carcass from the afternoon hunt in a field, threw out a call, had two yotes come in. I told my buddy to throw out a countdown - he said he wanted me to get something with the new toy and that he would shoot on me. For the record he has one of the newer AGM 640 50mm dedicated scope type things and that is a pretty slick unit as well. I watched the coyotes work toward the carcass and was playing the with zoom. True story, I got up to 18X but was steady and was watching a 16 bit dog walk, sit down and look at me. I could make out the ears at 170 yards. I threw out a 3, 2, 1 and the coyote was DRT. My buddy had put down his gun down thinking they would carry on to the carcass and didn't get any shot as a result.

When it comes to accuracy and return to zero - its good enough. All shots are 100 yards. I witness marked the unit and that keeps it level enough most of the time vs reticle reference. I zoomed into 18X and referenced off where the reticle fell under the letter A in the menu. If I made it a point to fuss with it and try to get very very close to the point I'd based an adjusted group from, it is MOA-ish capable across multiple remove/remount. The rifle is a sub MOA gun and makes everything involved look easy, so it had a running start. The smallest group was a series of removing and remounting 4x, shooting 2 rounds at a time at 18X with all the care. Basically the other groups represent various zoom and effort of alignment combos, but the real test is coming soon. Next range trip I'm going to shoot 50 rounds, one at a time, so 50 RTZ remounts using the external reference marks ONLY and taking what I get. I am going to note WHERE the reticle falls but I'm not going to correct. From there, I believe that I'll be able to figure out the approximate box where its 1, 2, 3, 4 MOA off based on the reference. From there I should be able to determine the ability to know I'm going to hit, say a 2x2" reasonably reliably. I'm very curious to see the results.

I'd guess around then you'll be able to buy a rail mount

Menu allows for 3 weapon profiles, screen can be dimmed down to be easier on the eyes, I'm generally happy with the purchase. This could replace my 'ol Armasight Zeus the way things are going.



Horizontal string was 1, remove, 1 remove, 1



Called right flyer



3, remove, 3, lower mag and only minor fussiness over reticle alignment




2, 2, 2 with a little reference effort and 2, 2, 2,2 - every comma = remount until it was as good as I could hope for and then very careful pressss of the trigger.


I found and bought the Burris eyepiece adapter to see how it did as a spotter. The answer is "not great". The Burris eyepiece limits FOV and is mainly a thread protector.



So, more soon. I need to swap the mount and then get back out to the range. I'm waiting on a couple things to come in but I'm excited about the potential.

Final thought, I want a rail mount - but - the way the unit is shaped I dunno how it is going to work clearance wise with 1.5" mounts.

Third hunt update in post 50

Gentlemen, I have used a Leupold Mark 4 12-40 for years now and have also been using the KDG Optics case with it. I am in the market for the larger Mark 4 20-60 and I am curious about the mounting bar on the bottom.

Since I don't own the larger 20-60 I am wondering if anyone here that has one can measure the height of the spotter, from the base plate that looks like a rail to the top of the spotter. The KDG case has to slide in and from pictures online it looks like the 20-60 has a larger height than the 12-40 due to the rail looking bar on the bottom. They are both using the same housing and I called Leupold to ask them and they didn't have the measurements.

Also, is the rail mounting plate on the 20-60 removable and does it have to be used, or can I just take it off and slide the KDG case onto it and mount it like the smaller 12-40.

Any help and pictures appreciated. Thanks

For sale:

Vortex Razor HD 4000 laser range finder. Great condition, used very little. Comes with pouch and lanyard but I no longer have the original box.

$275 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

Our first match of the year at Colemans Creek in North Carolina was a big success.

We'll be at Carl Taylor's again in Colville, Washington May 17-18
Cameo/ Grand Junction, CO Aug 16-17
Marksmanship Training Center in Lake City, MI Sept 6-7
and finishing the year at Arena in Blakely, GA Oct 25-26.

https://practiscore.com/clubs/guardian_long_range_competition

All Guardian matches this year will be the regular Guardian format. Individual match on Saturday. Dinner, awards, raffle table, and mission discussion Saturday night. Sunday we'll pair up shooters based on how they did on Saturday and shoot very similar stages in a team format. Please reach out to [email protected] with any questions or to schedule some time to discuss what we've got going on.

Its more than a match - It's a mission! -and we're looking to support our mission through non-Guardian matches again this year too.