Does anyone have any experience reloading the Berger 185 Juggernauts in 308

Looking for a Long Action mag bolt face any zermatt, lone peak or impact. Let me know what you have

Lightly used.
$105 shipped

PayPal f&f or Venmo

Selling my GA Precision GAP-10 in 6.5 Creedmoor, build is 22” bartlein 6.5 CM barrel, Geissele SSA-E trigger, SLR adjustable gas block and PRS stock. Replaced original extractor with a JP extractor. Has around 1100 rds through it, still shoots great, just moving to a different caliber. Rifle will ship in original GA Precision case with a new 20rd pmag. Rifle has some minor brass scuffs from weighted arca on the bottom of handguard and minor wear from use, but still looks great.

Price is $2700 obo shipped/insured to CONUS where legal to own.

I accept USPS Money Order, Zelle, Venmo, Paypal F&F discrete, and cash if FTF in central Arkansas.

Not interested in trades right now.

Selling 3 Nightforce NX8 4-32x scopes that were mounted on safe queen rifles. No longer have the rifles so these need to go. All have 200 or less rounds on them. They will ship in factory box. $1775 shipped each.

2 have Mil-XT reticle
1 has Mil-C reticle

I ordered some ADG brass to try for my 7 PRC. Been reloading only Hornady brass full length sizing using Hornady Custom Dies. It it really necessary to reduce powder charge weights because of smaller internal case volume? Also, if new empty brass chambers and extracts fine and case necks look uniform, is it necessary to full length size new brass before reloading? Thanks

I want to put a MDT CKYE-POD Double Pull bipod on this rifle..
Anyone have an idea how I could put a ARCA rail on this stock hand guard BushMaster 223/556 model 90824. Or should I just get a different hand guard this one is 12"View attachment IMG_1662.jpegView attachment IMG_1661.jpeg

Steel cased 7mm

For sale:

Kestrel shot timer. Box has been opened and battery installed but never used at the range. In original box with manual.

$150 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

I was looking at reviews on March optics and found a couple of them that reflected tracking errors in March scopes. I believe they were both 3-24 models.
I have been lusting after the 4.5-28, but, damn, a 400 dollar Arken can track but not a 3000+ optic?

Just finished this build today, looking forward to running it through it's paces.

The Broadsword Builder kit is extremely rigid and well built with clean machining work. The face of the Upper Receiver is true and showed virtually no Runout

The Upper with it's heavy construction and increased flared forward surface area would be well suited for the heaviest profile barrels. Barrel installation requires a mandatory thermofit, no shims or Loctite required.

Handguard to Upper Receiver fit is exceptional with its integrated anti-rotation tabs and pin create a Rrock solid lockup.
The fit between the 2.5" Titanium Barrel Nut and Handguard are very tight, without even tightening the handguard screws there is no felt Handguard flex. Once the opposing Handguard screws are torqued down with it's wedged Barrel Nut/Handguard design there is absolutely zero flex.

The only down side I would say is thier Broadsword Lower Receiver doesn't have the Full Ambidextrous controls that most quality manufacturers have today.

One of the notable enhancements I do enjoy with the SOLGW lower is they have elongated the grip position so if you have large hands it puts your Trigger Finger in perfect placement.



The Complete Build list is as follows:

SOLGW Broadsword Build Kit with 13" L89 Handguard.

Geissele's new release Heavy Contour Barrel.

SPECS
LENGTH: 14.5"
WEIGHT: 2lbs 2.6oz
RIFLING: Cold Hammer Forged
PROFILE: Geissele Heavy Profile
GAS LENGTH: Mid-Length
GAS BLOCK DIAMETER: .750
GAS PORT SIZE: .076
MUZZLE THREAD: 1/2 x 28
CHAMBER: 5.56
TWIST: 1-7
BARREL EXTENSION:M4
MATERIAL: Chromolly Steel
FINISH: Manganese Phosphate





Lantac Dragon Dead Air KEYMO Wolfman 5.56 Muzzle Brake.

Surprilitive Arms .750 AGB.

Geissele Ambi Charging Handle.

Geissele 5.56 Enhanced AR-15 Bolt Carrier Group - Nanoweapon.

TriggerTech AR-15 Single-Stage Competitive Trigger with flat trigger shoe 3lbs Fixed. (Breaks Clean at 2lbs 10oz)

JP Hand Fitted Takedown Pins.

PWS QD End Plate and Castle Nut.

BAD 60/90 Ambi Safety.

Vltor A5 Buffer system with JP polished Rifle Length spring.

MagPul DT-PR Carbine Stock.


 



Range Report to come.

Jake.

Couple notable updates for these builds. 18DEC24

(1) I've swapped out the triggerTech triggers and replace them with the Geissele SSA-E X for both rifles.

(2) the suppressor mounting system/Muzzle Brake has been changed out from the Keymo to the Xeno System as I believe it creates a more consistent and repeatable engagement from the muzzle device to the suppressor.

Hey Sniper's Hide community,
I’m Joe F., the founder of KMRNL, a new company launched in 2025 dedicated to engineering top-notch firearm accessories for precision shooters like you. As a lifelong precision shooting enthusiast, whether you’re hunting, competing, or training tactically.

Today, I’m approved to announce an exclusive group only on Snipers Hide for members to buy our flagship, patent-pending designs: the Long Action Two Round Holder Stainless and the 6.5 Creedmoor Sidewinder Two Round Holder.

About KMRNL​

KMRNL is built on precision, durability, and shooter-driven innovation. Our products are designed with real-world input from marksmen to ensure they deliver. This group buy is your shot to join us early, snag some unique gear, and support a small business made in the USA.

Products​

Here’s what’s on the table:

1. Long Action Two Round Holder Stainless (Magnum Stainless)
   • Description : Crafted from rugged glass filled proprietary polymer blend with stainless screws, this holder is built for magnum calibers and beyond. It securely holds two rounds with quick-access design—ideal for tough conditions.
   • Multi-Caliber Compatibility : Accepts multiple calibers of similar diameter (e.g., .300 Win Mag, .338 Lapua, and more—full details here).
   • Customization: Comes ready to install, or you can paint it yourself or have it Cerakoted at your local shop for a personal touch.
   • Regular Price on KMRNL.com : $29.99
   • Group Buy Price with Coupon : $20.99 (after $5 off with code snipershidegb)
     
     
     
2. 6.5 Creedmoor Sidewinder Two Round Holder
   • Description : Optimized for 6.5 Creedmoor, this holder features a 10-degree angled design for ergonomic access and full-side coverage for impact protection.
   • Crafted from rugged glass filled proprietary polymer blend with 10.9 high grade steel screws
   • Adjustable tension via a single M5 screw keeps your rounds secure.
   • Multi-Caliber Compatibility : While tuned for 6.5 Creedmoor, it’s also compatible with:
     • .308 Winchester
     • 7mm-08 Remington
     • .243 Winchester
     • .260 Remington
     • .22-250 Remington
     • .25-06 Remington
     • 6mm Creedmoor
     • .270 Winchester Short Magnum (WSM)
     • .300 Savage
     • 6.5x55mm Swedish Mauser
       (Full specs here).
   • Customization: Ready to install out of the box, or paint it yourself or get it Cerakoted at your own shop.
   • Regular Price on KMRNL.com: $39.99
   • Group Buy Price with Coupon: $24.99 (after $5 off with code snipershidegb)
   • Special Offer: Exclusive to this group buy : get the non-MLok version of the Sidewinder included free : two holders for the price of one!

Group Buy Details​

• Coupon Code: Use snipershidegb at checkout on KMRNL.com for $5 off the posted price—applies only to these two products!
• Shipping: Free shipping to all of the USA only—sorry Canada and overseas folks, shipping costs are just too high for this one!
• Duration: Runs until March 3rd 2025 starting today.
• How to Participate: You can either
  1. Reply to this thread with:
     • Product name (e.g., "Long Action Stainless" or "6.5 Creedmoor Sidewinder")
     • Any special instructions
  2. I’ll track orders with a running tally and confirm via PM, and ship out on March 3rd 2025.
     OR
  3. Head to KMRNL.com, add your items to the cart, apply code snipershidegb, and complete your purchase. The group buy closes on March 3rd 2025
  4. INCLUDE YOUR SNIPERS HIDE NAME PLEASE. Thank you

Why Join?​

• Founding Customer Perk: Early supporters get a 10% discount on your next KMRNL purchase.
• Exclusive Deal: The Sidewinder two-for-one non-MLok offer is only available through snipers hide.
• Flexibility: Both holders are patent-pending designs, ready to use or customize to your style.

Dive Deeper​

Visit KMRNL.com for more details, pics, and the full scoop on these holders. Check the Long Action Stainless here and the Sidewinder here.
Thanks for checking this out—I’m stoked to see you jump in on this group buy and put some KMRNL gear to work.

Best,
Joe F.
Founder, KMRNL

PS: Ammo not included*

$90 shipped

Selling my very lightly used AGM Rattler v2 35-384 thermal scope. Excellent condition, includes factory box with all accessories. Amazing little thermal for the price with a phenomenal battery life. Feel free to message me for videos of my predator kills to see the quality. $1850 shipped

We have about 2 acres of gravel and landscaped area at our place that is constantly growing weeds. I’m fine nuking the area. Wife likes organic. Are there any good options to dump in the 4wheeler mounted sprayer and be rid of em? Mixture of broadleaf and prairie grasses, clover and a bunch of other little bastards

Used once. Asking $50 shipped

New and unfired custom Straight Jacket Sig cross in 7mm SAW. Cerakoted, comes with Redding Die set and 200 pieces of never used WTO brass. Asking $2100 shipped and insured.

Garmin Xero C1 Pro Chronograph light use. has original screen protector on it. Works great. I have two of these, no tripod. $430 shipped

Looking at purchasing a milspec Nightforce ATACR 7-35x56. How does Nightforce compare to the SB 6-36 PMii in terms of glass quality and durability? Previous experience has only been with SB 5-25x56 PMii PSR scopes. Thanks for the help.

I thought that New Mexico had some of the most stringent gun laws in the country?How did 3 people get shot and killed and a bunch more wounded at a unauthorized car show at some park yesterday?Thats odd.

I haven't found any threads comparing these 2 yet. Wonder if there just aren't many people who have had time behind the vision pro.

I'm in the market for a new chassis to replace my PRS-TCS. The distance from grip to trigger is just too big for my hands. I'd like to go with chassis over stock for added adjustability also. This will be used for PRS.

At first glance they look very similar. The buttstocks are different and I do like the adjustable bag rider on the vision. Price wise is very similar here in Canada. Vision is 10% more. Not sure its enough to make a difference, but MDT also has a wicked black friday sale that I could have some luck in this year making it a little cheaper. I like how the Vision is ambi, seeing as I'm a lefty, and if I decide to sell it for whatever reason I have a bigger market to sell to. I'll most likely be adding accessories to it as well, like a control bridge or weights.

Wondering what people think about the differences between the 2 and if one was a clear winner (for those who have handled both).

Here’s what I have. I will part out if desired. Upper has maybe 10 rounds on it. Just enough to adjust the gas block. I just don’t shoot LR308/ar10 platform
Aero M5 upper receiver $130
Rubber City Armory HP Bolt BCG $300
Sgt of Arms 17.5” ARCA rail handguard $240
SLR Sentry 8 detect adj. gas block $150
Insite Arms Heathen brake $160
CLE chambered 20” Krieger barrel .875” @ gas block . Cerakoted black by CLE. $700
$1700 invested
Or to arrange for local pick ip
>>>>Bonus . I will include a wheeler AR10/LR308 bore guide. It was used once to clean this upper after adjusting the gas block.
Thanks for looking
Cross listed

Finally managed to get a Vudoo across to Denmark, and what a beauty!
I have tried RWS, SK and Lapua Center-X through it and found that Center-X works extremely well. Below is a 10 shot group at 50m with the Center-X!

Unfortunately since day one, I have had occasional misfires due to light primer strikes.
The RWS had a few in between, SK was pretty bad and Center-X almost as bad as SK.

Every time a misfire have happened, I have not been able to successfully re-cock and get ignition.
Usually if I eject and re-chamber, I'm able to send the misfire down range at second or third try.

During my most recent range session, out of the first 200 rounds, i had 26 that failed to fire at first chambering.
All of those were Lapua Center-X, see picture below.

Have tried disassembling the bolt, clean and lightly lube all the moving parts, but doesn't seem to help any.
Action is a V-22 Gen 2, it currently has 1100 rounds through it.


Any suggestions on how to fix the issue? Could it be a light firing pin spring?

MPA Matrix Pro RH 700 SA Black. Includes EVG grip, barricade stop. She's been rode hard and put up wet. Will have original cheekpiece installed not the Bison Cheekpiece shown.sold shipped

CH small primer swage punch and die used works perfectly.

40 shipped