Anyone have a suggestion for a quality soft case for an hd/long 2section inverted tripod? I have a red mist unit that did not have one.
Thx

How important is it to have a tripod caddy for matches? What ways do you all stay organized and efficient during stages (reloading mag, dope cards, notes etc.)?

ELR kit
I had some help selecting this setup from one of the great elr shooters of our time. He said order the action with 2 bolts and you can set your rifle up “switch barrel”. This gives one the ability to run both 375 Cheytac and 416 Barrett on the same rifle with just a barrel vise and some go/no go guages. The included blank supports .375 Cheytac/Enabler territory.

BAT EX 2” action stainless

Bat Action wrench (not in the photos)

Cheytac bolt, stainless fluted

BMG bolt, stainless no flute

Bartlein 8 twist 375 blank 1.75-1.50” muzzle for 36” finish length (37” now)

Terminator T5 muzzle brake (1.5”) .375 cal
I went with 7/8 24 threads based on advise from Mile High about this thread pattern being optimal for the new TBAC 50 cal suppressor mount

Bix n Andy Comp trigger w/sear insert


$5500 for all

buyer covers shipping from my FFL to your FFL

I also have a Manners LRT 2.0 for Bat Ex with both weight kits, prism rail, in Elite Plains high gloss on order that will be finished mid 2025. I had plans to cerakote the action bronze to compliment the stock colors. It is not paid for but will cost approximately 3k if you want it.
I will pass it on to you at cost when it’s ready if you like.

*photo of manners stock to show color pattern

Vortex Impact bought for Mammoth used it a few times and unfortunately due to work and family have to sell some stuff.

Selling a like new Vortex Impact 4000 weapon mounted laser range finder. The unit is in immaculate condition. It was mounted once, zeroed and left unused. Comes with everything that it would from the factory minus the paper target.

Sold

No trades please.

Stock has been on a rifle but not long. Great upgrade to your Rem 700 SA. Uses aics mags. Original box and spacers. $275 shipped pp ff,venmo,zelle.

Pretty much new. Stuck it on a rifle but never actually left the house. Changed directions with that setup and now no longer needed.

Will come with everything as new, rings pictures are NOT included

SOLD shipped

Leupold Mark 5 5-25. First focal plane. Mils. CCH reticle. In great condition. $1600 shipped

Been waiting a while for this since they announced it was in the works. Just ordered the two bottles to test out for now, but the full kit might be worth the price.

Selling an ARC m-brace 34mm mount 0MOA cant 1.5in centerline height with built in bubble level - $200

Also m-brace LRF mount - $100

Together $275

This is Matt's newest action. Most of them have the angled ejection port like you see on his Raider series. This is 1/4 that have the rectangular ejection port (my preference for looks). It is unfired and will come with the brass bolt knob pictured and a normal DLC coated black knob. These are two-lug, 70 degree bolt throw actions that will take Impact prefits. I just won't be building on it anymore so it's off to the next owner.

$1,200 shipped. An extra $200 if you want a Elfmann match trigger in there.

No trades.

For sale, 2 Geissele 1.93" T-2 mounts LNIB.

These:

$100ea $80 shipped.

I have 2 consecutive right handed Apollo actions.

One is completely new still wrapped in bubble wrap as it came from Joel. $1100

The other has a 20" 8 twist 6.5 creed Long Rifles inc rem varmint contour threaded 5/8-24 tube on it. 320 rounds on it. Also has a TT 2 stage special flat shoe. $1850. I can add a new gen 1 Black KRG bravo for an additional $400 that has the hook cover and adjustable pad.

Terminus action wrench. $75

If you want it all I'll throw the action wrench in for free.

I have a case of 8 boxes / 80 rounds of Barrett 50 BMG M33 Ball ammo up for grabs. This sells for $80 per box or $640 per case online.

Only $OLD

Brand new. Comes with all factory accessories and paperwork. PWS Long Stroke Piston System, adjustable gas block. Asking $700 shipped CONUS.

I am pretty flexible on payment methods, electronic or otherwise. This will be cross-posted, so items will go by timestamp. If you want something, call dibs on the post and send me a DM, I will not send you one. Dibs beats haggling.

Feel free to make me an offer, cash or trade (potential items listed below). Worst I can say is no!
-6.5cm brass & bullets
-223 brass & bullets
-World's Finest Trimmer 223 Trim Chamber

• Hornady Lock-N-Load Classic Press - $175 shipped - Like-new condition. Used to load maybe 50 rounds + decap ~100 more.
  • Inline Fabrication Ultramount
  • 4x Lock-N-Load Die Bushings
  • Lg/Sm Primer Feeder Arm
• World's Finest Trimmer 1/2" Carbide Cutter - $30 shipped - New & unused
• Lot of Dies - $90 $70 shipped (individual prices below)
  • Lee Easy Adjust Dead Length Seating Die - 6.5 CM - $15 shipped - Open but unused
  • Lee Powder Through Expander Die - 45 ACP - $13 shipped - Used, in good shape
  • Lee Powder Through Expander Die - 44 SPL - $13 shipped - Used, in good shape
  • Lee Seating Die - 44 SPL - $13 shipped - Used, in good shape. No case
  • Lee 223 Collet Neck Die Set - $30 shipped - Catch & release from this forum. Has been used but is still in great shape. Has collet neck die & seating die
  • SPF Hornady 45 Cal Expander Die - $25 shipped - New & unopened SPF

Ran across these guys at our last match and can’t seem to find much out there on them.

I’m only a hundred or so into them, So far they are absolutely hammering and really remind me of a Berger Hybrid. And best of all, they’re available.


Anyone else played with them?

Looking for a sendero CDG prefit. 6.5cm or 25cm preferably.

New scope. Will include 30mm medium rings. Asking $550.

Hey all,
Need to come up with some cash fast for lawyer bills (don't get married, its a trap), so I'm selling my reloading equipment and supplies.

Dillon 1050 super with a quick change toolhead and Mr Bulletfeeder. Currently all set up for 9mm, but I've got dies and equipment to do 308 and 6.5 cm as well. Also include a case trimmer setup for 6.5cm and an AnealEase. The press was at Dillon 2 years ago for a factory tear down and refurb. $2500 for the whole setup.




Will also throw in a boat load of brass. .308, 6.5cm, .223, 9mm

Magma Engineering Master Caster with a 9mm mold. $1000


18x 1lbs bottles of Titegroup- $600

1800 ZSR small pistol primers- $1000

About 10,000 124 grain 9mm projectiles- $650


If you want to come pick up the whole shebang, I'll take $5000.

Obviously, pickup is best as shipping this would be kind of nightmare. I'm just south of Austin, Texas.

I have a Limited Division 2011 I’m looking to sell. DM me and I’ll give you info on who built it and send videos of it in action if you’d like them.

.40 S&W Limited Division build
Brazos Short Block
Infinity steel grip
Infinity magwell
Infinity trigger kit
STI barrel
Kensight rear sight and red fiber front
2x Dawson Precision tuned mags 140mm I believe.

Gun is 51oz and feels absolutely amazing in the hand. Smoothest 2011 I’ve ever ran. Has holster wear from competitions. Could use a makeover unless you just want to use it like it should be anyways then it doesn’t matter

I bought this with intention of running it in the limited class. But I constantly revert back to my prodigy with SRO for limited optics. And I have a 17L for limited. I spent a chunk on a new Vortex Razor and need to recoup some funds.

$2400 asking price (DM me and let’s talk). Well over $3000 in this beauty. Will ship to FFL of your choice or meet local in Columbus, GA.

Trades: Vortex Impact 4000 LRF, high end optics. Gen 2 or 3 razor with EBR-7c/d mrad reticle. NF, or Leupold in FFP/MIL. Nice bolt rifle. Or??

Like new

Leupold Mark 4HD 6-24x52 (34mm) Side Focus FFP PR2-MIL Riflescope 183823

With box and papers

$1100

I am in the US and have been invited to compete in Italy this fall. My understanding is that you need a gun permit to shoot there, but if I have an invite from a match director, they waive that requirement.

Has anyone have experience with traveling to Europe or Italy and competing?

I had to do it, everyone seems to have the best rifle in the price range by purchasing the Bergara B14 R .22. I have one, it is serial number 2000 from 2019. I could never get it to function, until I staked the ejector like everyone told me to do. I just couldn't seem to get the punch and do it. I finally did that, but the magazine isvery wobbly side to side. I ordered and received another Bergara a couple of days ago with the date of 2024. The magazine fits nicely in it. When I change and try the new mag in the 2019 rifle , it is wobbly. . Does anyone know what was changed ? Is it the mag well that is smaller ? How do I get the mag to fit as it should in the older Bergara......Yeah, I know, I gotta be spoon fed here, but old brains are a little foggy sometimes. The stippling on the new stock is not as slick as the old rifle, the molded in HMR in front of the trigger is gone in the new rifle. The barrel is rounded off where the fat part tapers down on the new rifle, the old one has a discernable line there. Best rail for the money ? I don't remember what I put on the older Bergara. I think I want plus 20 MOA. As always, I truly appreciate all the help this old **** can get !