Looking to sell my alpha 6gt brass

100pc brand new
The rest is once fired.

222pc are loader with h4350, cci450 primers, and berger 109lrht. I can pull the bullets and powder if buy would like.

then there is 178pc once fired.

Looking for $500 for all of it. Payment via pay pal f&f

Sold

Before i haul off and buy a new one, looking for an excellent condition Tangent Theta w the Gen 2XR or Gen 3XR.

I have a New in the box Thunderbeast 338 Ultra SR Black

Comes with 3/4x24 SR muzzle brake

$1450 shipped and insured.

I believe this is the GEN 1 Ultra SR suppressor

Will consider trade for Nightforce NX8 or ATACR 1-8

This will need a Form 4, someone Local in Florida is preferred for stamp purposes

PayPal FF, Money order, Cashiers check

Hello everyone,

I am looking to build a rifle in an MDT ESS Chassis with the full rail forend and it requires the MDT High Scope Base in order for the fore end and scope base picatinny to line up correctly.

I was initially going to buy a barreled action from IBI (Ultimatum Deadline action). Both companies are in Canada so it makes it easier for me. The problem is when I called them was they told me the MDT Base will not work on the Deadline as they said a Remington rail will not fit a deadline because the tops of both actions are different. I was thinking about seeing if I can get the measurements and drill new holes in the MDT base if the dimensions would allow it but it would be a hassle. The Deadline outer diameter is 1.358" +/- .010 so that may work, from what I've read online the Rem 700 action is 1.35.

Why don't I just get a Rem 700 action? Well multiple reasons. I do not want a 90 degree bolt throw and I do not want an open top receiver. 70 degree or less and a closed top receiver is what I am looking for. By closed top I mean I just want an ejection port, nothing more. Even the Bergara premier actions are too "open".

My question is, are there any actions that are Rem 700 footprint, same receiver height, no integrated rail, same scope base screw dimensions, 70 degree or less bolt throw and are not open top? Icing on the cake would be a fluted bolt.

Most companies I have been looking at do not specify anything other than their action is a Rem 700 footprint.

Newbie question here. Trying to get started in the .22 PRS game and question about mounting an Athlon Argos 4-26x50. Have it on a 10/22 with 20moa rail and only have 8 mils of adjustment up. I am doing something wrong or just not a good scope to run? Says it has 18 mils of total adjustment. Just looking for advice. Thanks

I would like to propose my new social theory and get your feedback on it. This is based on 20 years of dealing with groups of people.

THEORY: The collective IQ of a group can be determined by taking the average IQ of the group, and then subtracting from that number 1/3 of the difference in IQ between the average, and the average of the lower 50 percent of the group.

As an example, if the average IQ is 100, and the lowest half of the people in the group had an average IQ of 70, then this theory says that the group collective IQ will be 90.

This theory reflects the fact that the intelligent people in a group who are above the average are hindered from solving problems rapidly and correctly by the influence and disturbance caused by the people with intelligence below average. In other words they cancel each other out, but intrinsic survival instinct and work drive progress slowly forward. The theory also accounts for the disproportionate influence of those who are truly mentally disabled in society. They take a large percentage of the time of the most intelligent because the severely disabled constantly create problems they are not able to solve themselves. It is much easier to destroy than to build. This reflects the laws of thermodynamics.

True genius is occasionally recognized and the survival instinct drives everyone to adopt a more efficient form of living once the truly intelligent have figured it out. This drives society forward long term. However, in the immediate term, the group IQ can be approximately calculated using this theory.

Gently used. All accessories in box. Would like to sell quick to fund other equipment.

125.00

I have a custom 43x package I’d like to sell but prefer to trade for a prodigy 4.25 package or OA defense 2011 compact.

43x
TTS customs slide
True precision threaded barrel
Suarez street comp
Holosun hs407k
Recover tactical rail
Rangerproof trigger
Ghost connector
Polished trigger bar
DPM soft recoil spring system
Vickers slide release
Shield arms mag catch
Empire katana magwell
Custom stippling, double under cuts done by generational guns in Iowa.

Possibly more I’m forgetting. In the interest of transparency and honesty, this thing shoots lights out accurate and the trigger is amazing compared to any Glock I’ve ever handled. But, two of the magazines seem to have issues that are common on some generations of the S15. You can send them into shield arms and have them replaced for free, I just haven’t gotten to do that. I’ll also include all the original springs, followers and base plates.


MIE productions level 2 holster on qls (belt not included)

MIE productions chimera holster
Tuxton tactical IWB holster
Olight PL-2 and two chargers
2 15 round s15 mags
6 20 round s15 mags

1250 to your ffl

Springfield prodigy in very good condition, with a round count of only 350. It does have slight holster wear starting to show. Carried a lot, shot a little. Other than that, it’s look great.

- Original box with paperwork
- 2x 17rd mags
- Optic plate with hardware (new)
- Streamlight TLR-1 HL
- OD Green ANR designs OWB holster with RTI mount

SOLD shipped to the lower 48 where legal

300 Blackout ARP. Excellent condition. Only 40 rds on it. I just use my p&w 13.9” more is only reason for sale.

- Aero M4E1 upper and lower recievers
- American Defense (ADM) 9” mlok rail
- 10” ballistic advantage barrel
- SOLGW gas block
- Hyperfire trigger
- Strike industries enhanced LPK (takedown pins, bolt and mag release and Ambi safety)
- Magpul k2 grip
- Nitride FA BCG and standard charging handle

$760 complete ARP with lower
$460 for the upper complete with BCG/CH
Prices are shipped to the lower 48 where legal

Zelle, PayPal FF, or Venmo for payment

Testing the waters with my Steiner C35 Gen 1 thermal clip on. I bought it like new with an hour or two on it a year ago and have barely used it. Will come with box and manual as well as several batteries and all original accoutrements.

Asking $2000 obo shipped conus

Selling a used Athlon Cronus BTR Gen2 4.5-29x FFP APRS6 MIL scope. Put this on a Vudoo v22 rifle, and only used it for a couple of range trips. A couple of light marks from scope rings, and a couple of light marks on the knobs, see pictures. Glass is flawless. Scope is in good condition, and the sun shade is included. Asking $975 shipped.

Zelle is preferred, but can also take discreet PayPal FF.

Hawkins ultra light tactical 30mm low .885”. $125 shipped.

Steiner T6XI 5-30X56 MSR2 MIL reticle
Comes with original box and accessories including sunshade, throw lever, and flip caps
Glass is pristine, small mark on housing (pictured), otherwise perfect functional condition

$1,300 TYD PayPal or Venmo

For Sale:
Busse SAR 5
Full tang
INFI Steel
5" Blade (6mm or 1/5) Thick
10 1/2 OL
Black Micarta Handle
Black kydex sheath with nylon belt hanger
$450 Shipped
Venmo or PP F&F

Selling a used AI dovetail mount for 30mm scopes. The height is 1.25" with 0 moa of cant. The mount will for sure allow clearance for 50mm scopes on a continuous top rail, possibly 56mm as well.

sold

No trades please.

Terminus Zeus, Right Hand, Short action, quick change.
I have a gold one and a black one in stock. Same price for both.

McMillan Game Warden. 2.0 in their Hard Edge Camo. Defiance SA inlet (700 clone),RH, M5 DBM, Proof Sendero barrel channel. Pillars are installed. 4" front picatinny rail. Has had an action mounted in it and light use. No bedding work or modifications have been done to the stock. Excellent shape and very lightweight, less than 2 lbs $550 shipped.

Lmk what ya got

Old Sniper Shield C. WW1. Not hard to make... but bet it would scratch the living hell out of any bolt action you fire through it! But would make a nice display!

Sirhr

SOLD

New EOTECH OGL

Grey color. Fresh production, full kit, full power, brand new in box. Green vis laser.

Never mounted, function tested. 0 rounds.

$3,800 shipped with insurance - UPS Overnight. Tracking provided.

Cross posted. Never sold on the hide, but have feedback on another forum with same username. Happy to discuss via phone with you.

Prefer PayPal FF, but willing to discuss alternatives. Not looking for trades.

Looking for a 6.5 Creedmoor barrel for my AT-XC.

Color and length don’t particularly matter, but would prefer a factory AI barrel.

Looking for an action or a full BA in 22LR with a heavy comp contour! Let me know if you have one!

I have 2 Both are black, Both with original box and everything that came with it $150 shipped each.

Can get more pics if needed

One sold @paigecm
One sold to @R6721colt

Zeiss S5 3-18x50 ZF-MOAi reticle. Excellent condition, glass is flawless. Comes with original box, paperwork, tool, scope caps. Added Tenebrex tactical clear lens covers, Zeiss sun shade, and Zeiss throw lever. LRP S5 318-50 ZF-MOAI 740035015968 UPC

$1,800 (price dropped)
TYD PayPal or Venmo

$120 Shipped for Federal. Message me with questions.

Login to view embedded media
(28) 50rd SK Standard Plus SOLD
(8) 50rd SK Rifle Match SOLD
(6) 325rd Federal Target Grade Performance