Hey guys, finally decided to show up. I hope I can get long range shooting going for real this time.

SOLD!!

Brand new, used once at practice. Fits any chassis with M-Lok.

Venmo, $140 shipped conus

You read it correctly. My brother thought he had CFE 223 in his chargemaster when it actually had, A 1680 from reloading blackout, It didn't go well. He pulled the trigger ( bolt action gun) an he said he felt stuff hit him in the face. The bolt felt like it was welded in there. He didn't chalk it up to be a reloading issue so he dropped a round into a Ar. Well that didn't go well either. To add to the pressure problem a surpressor was attached. The mag blew out and apart and the BCG was like it was welded in there. Had to believe, He was totally fine. My question is, does anyone have the software to figure out what that pressure was and I'd love to know what that velocity comes out to be BTW he got the bolts out. The brass was molded into the bolt like it was poured into it. Bent the extractor.
I told him my rule is always when finished, dump the powder back into the container. Never have any other powder even near the bench that your not currently using.

Selling this 5-25x56 ATACR Mil-C FFP. Bought for a build that never came together. It’s been mounted in rings but never left the house. $2100.

Not interested in any trades. Will ship, but located in West Texas.

Ive had a standard HMR many years ago, and a SV years ago as well. Liked both guns, and both shot very well.

Im looking at these 2 rifles at the moment. The hmr pro is $100 more, but does have a better stock IMO over the SV.

Talk me into 1 or the other.

Need a barrel for this Gideon stock. Looking for something with maybe half life or so left in an M24 or smaller profile, .473 bolt face, threaded 5/8x24, and in the 18-22” range, impact 737 action. Cartridge is whatever honestly long as it’s 308 case size and short action!

I am a left handed shooter and recently purchased a lh Fierce Carbon Rogue in 7mm Rem Mag. The fifle has a 24" carbon wrapped barrel with a 1:8 twist rate. I as seeking some guidance on what deer round I should test first. Must admit that the fierce was not my first choice, but being a lefty, the choices and availability are pretty few. Thanks in advance.

Selling my Smith & Wesson model 2206 Champion. I know this is a very niche market gun but I figured I’d throw it up here and see if anybody was interested. Only a few of these things floating around.

I don’t have the original box for this one, unfortunately but it is in excellent condition. Has a very low round count as well.

Located in Morgantown, West Virginia for anyone close by.

Please feel free to shoot me a message with any questions or post them up.

Asking $2500 shipped

Like new HK mp5k folding stock

$225 shipped to lower 48

HK mp5k trigger housing & brand new never fired Franklin armory binary trigger pack. I did slightly modify the holes on the hk housing to fit my mac5k.

$450 shipped to lower 48

Anyone know if it’s possible to feed 6.5 Creedmoor out of a WSM/PRC magazine with some modification? Just have several PRC mags and would like to not have to buy new ones. Thanks for the help

approximately 300 rds through it. Very well taken care of. Fits Zermatt Origin action. 22 inches in length. $525 shipped.

GREY GHOST PRECISION MKII AR15 BILLET BUILDERS SET WITH 15" HANDGUARD.

This was a new set I got from them just a couple weeks back. Decided to not build the 22 ARC I was planning on.

Asking $335


Thanks!

Excellent condition Bushnell CONX 1-mile rangefinder. Pairs with Kestrel or Garmin Foretrex for instant ballistic solutions. Barely used other than around my yard a few times. Just decided to get some rangefinding binos instead. $225 Paypal FF. Shipping CONUS included.

Used Thunderbeast brakes both are 5/8-24. Prices are shipped.

Thunderbeast 338 SR 5/8-24 --- SOLD
Thunderbeast 30CB 5/8-24 --- SOLD

Gents, I’m looking to do 1-2 team shooting events per year and looking for a training and competition partner. I live in northern Maryland but willing to drive to PA/WV/VA for training. Ideal partner trains at Peacemaker in WV as that’s my home range.

PM me if interested.

I sold my 22 arc and no longer need the ammo. I have the following available:


5 boxes (95 rounds) of 62 gr V-Match - $100 shipped
5 boxes (100 rounds) of 75gr Black ELD-M - $100 shipped
5 boxes (95 rounds) of 88gr ELD-M - $100 shipped

Trijicon Tenmile 5-50x56
$1500 plus shipping

I have a shiny new proof research stainless steel bolt blank for sale. I had a plan but went a different direction.
$350 shipped

See specs listed below.
Barrel Length - Inches: 28
Caliber: 264
Contour: M24
Shank Diameter:1.2
Twist Rate:8

50 rounds down the pipe, moving in a different direction with this build. Barrel performance was impressive. At 100 yards I got 1.25 inch 5-shot groups with IMI 77g and 1.5 inch 5-shot groups with AAC 77g OTM. Shot with a bipod and bag. My shooting is average.

You get 16 inch Noveske Recon stainless steel barrel with headspaced bolt, gas block, gas tube. Gas block pinned/reamed to 1/8th inch to accommodate coil pin for easier assembly/disassembly. The factory included dowel pin is retardedly tight/hard to drive in. If a 1/8th inch coil pin is good enough for Geissele its good enough for me.

There are some scuffs on the barrel where I removed the gas block/its an extremely tight fit and the hole drilled for pinning naturally makes an edge that will scuff the barrel during install/removal of the gas block. This will not effect the performance whatsoever. The headspacing on this bolt/barrel is very tight. It barely chambers my "go" gauge. It will have a long life and lots of consistency.

Barrel is $500 before shipping from Midway. I feel like $275 is plenty fair for a virtually new barrel/bolt with some scuffs on it. Buyer pays shipping from Chattanooga, TN

Thanks for lookin!

Hi all. I have been fighting this X-Bolt Pro Tungsten and am getting groups on par with my lever gun with peep sights. I have checked all torques, switched scopes, shot with the Hawg and the radial brake and the gun just isn't behaving properly. I have checked receiver bolts for spec (tightened front first) taken the scope rings off and reinstalled. Often the first couple of shots are OK, but subsequent shots are all over the place. The POI shifts between range sessions (at range sessions I am also shooting a Tikka and a Lupo under identical rest/bag conditions and am 1 moa or better). Browning has mentioned that I could mail it in, but before I do I could switch rings to medium/shoot with no brake/try different ammo brands (using 143 gr precision hunter - hate to buy more ammo when I have literally sent 100's of dollars down range on this gun).

I was inspecting the gun and noticed that where the barrel meets the receiver isn't perfectly aligned. You will see a stock photo that shows perfect alignment where the barrel meets the receiver, and a picture of my gun (where the MP stamp is visible)... My barrel seems to be out of alignment with the receiver by between 1/64" and 1/16".

Would this type of misalignment potentially cause inconsistent groups? TIA, if so, I may as well mail it in and quit trying to fix it.... just kind of bummed I have been fighting this thing and don't trust it enough to hunt with it.

I rock.

decided I’d start a thread so we could help each other waste money on neat stuff

The Rules:
-Post a freaking link
-keep it under $50

Here’s mine. A kick ass American Made Flag.

Bergara B14 6.5 creedmoor, 22” barreled action. Maybe 150-200 rounds total use.

VG6 Precision Gamma 65
Muzzle Brake (needs new crush washer)

Anarchy outdoors picatinny rail
With bubble level
30 MOA

$750 shipped lower 48

Reposting, I had this posted some time ago but the deal fell through. I have not been able to repost due to work travel.

Like new condition, no dings or scratches. I have fired 40 rounds. Comes with items pictured. Chambered in .223 Wylde

Price: $2150 shipped to your FFL. No trades needed.

Payment via Money Order or TBD. Please make sure your FFL will accept from a private seller.

Item is crossposted.