Trying to make an informed decision on my next rifle for hunting. Going with the Xbolt. It seems going with the Xbolt 2 vs xbolt is a no brainer, although can save 200ish on the original xbolt.

-Im debating between the 7prc and 300winmag, I like the 7prc's numbers and the fact its marginally better then the 300 but had less recoil. However its a new round and long term availability, is a concern. I can not order ammo online where I live. I also like to get custom turrets find ammo and run it, so dont want to play the hard to find game. and have the ability to hit any gun shop and find a box of ammo if needed. Really leaning toward the 300 due to ease of ammo

-Looking at the Xbolt(2) down to the speed and the speed LR. along with the speed sporter. I really like the sporters as they come in at 40-42in overall length with the brakes, vs the others are 44 to 46 and some change, which is a long rifle to be throwing around. I am concerned about the accuracy of the sporters. I wont be getting a can for the sporters. The 7prc comes with a 20in and 24in barrel and the 300 in a 22 and 26in, understand the 4in is going cost me 200ft per second. still going to keep me at the 1800-2k ft per second in the 4-500 range.

-Some models come with the radial brake some come with the Recoil hawg, any thoughts on either, read the hawg is better but heavier, and heard the radial can come loose throwing off shots and spits back into your face

I shoot deer mainly in the 3-500 range, have taken deer out to 700. I would say I want something that is the most accurate under 1000yds, of which I think any of these would do, but is one combo better then the other.

anybody have good luck with any particular ammo in either of these rounds in these guns.

As the title says, what am I seeing in my scope?

It's a Razor 1-6. I have never had problems with it before, and after scouring the internet, can't find any similar photos of this.

If set my magnification to 1x, on the lower left I see what appears to be an adjuster with a screw or something visible.

I double checked to make sure I'm not turning below 1x and it lines up perfectly at 1x. For me to make it disappear out of view, I have to zoom in to approximately 1.4-1.5x magnification.

I contacted Vortex and have sent it back. I use this on my work gun for our SWAT team and really hope that they will just replace the optic all together. We will see what happens. But I'm really curious as to what I'm seeing as I really don't expect Vortex to call or tell me what it is.

Opinions?

I’m looking g for a 375 can with an anchor break and that search leads to the EI asset.

Any experience with it?

Had this listed as a BA with the LP action. Decided to keep the LP since there wasn’t much interest. Still have no need for the barrel. It has 302 rounds on it.

- 24.5” Bartlein heavy palma 1/8 twist
- Chambered, cerakoted graphite black, cut & threaded 5/8x24 by LRI

There is a couple vise marks on the barrel as pictured. Otherwise good condition.

$415 shipped to the lower 48. PayPal or Venmo

The purge continues. Bought a few new sticks here off the hide last week. Need to make room for them. Not sure on exact round count but I’ll say 100, although most likely less than 50. This was my NV pig gun. Sighted in an ATN and only used on two hunts.

- Aero M4E1 upper and lower receivers
- Rainier ultramatch MOD 2 12.5” 6.5G fluted barrel, mid length gas, 1-8 twist
- Monster rexus bolt
- POF Ambi CH
- Superlative arms .750 adjustable gas block
- MI m-lok free float rail
- Geissele 2 stage trigger
- LWRC UCIW compact stock kit w/ H2 buffer
- Gen 3 Law folder
- Magpul K2+ FDE

- I’d like to keep the ASR brake for my cans, but will give the option to buy it. Add $50 if so

$1075 shipped to the lower 48 where legal. Your ffl must accept from an individual. PayPal or Venmo.

Next up on the chopping block. I don’t recall ever shooting this one, and it looks to be unfired. Excellent condition. If anything it has less than a box through it.

- PSA Sabre 13.7” complete factory built upper with CHF, mid length barrel, 1/7 twist, 5.56
- P&W extended SilencerCo ASR flash hider to 16.1”
- Adjustable gas block
- 13” Quad Rail
- Radian Raptor CH
- Magpul angled fore-grip
- Anderson lower with milspec parts kit
- Magpul ACS stock

$OLD shipped to the lower 48 where legal. PayPal or Venmo. Your ffl must accept from an individual.

Looking to get some feedback from firsthand users on the 500 Turkey/Deer combo. I have never owned a 500, but I have a lot of time behind the M590 while in the Marine Corps. I love the 590 platform but the only Mossberg shotgun that I have personally owned is the 930 JM Pro which was great. But how are the new production 500 & specifically the Turkey Deer gun? Is the slug barrel accurate? How do they wear, are there any issues to know of? My other option is an 870. I prefer the old Express from when Remington was on top (90’s and older), but I am considering a new 870. I know the old 870s very well, but I have only handled the new versions and they seem decent. Thoughts on either?

Eratac 36mm qhick detach mount.


Mount was 294 and adapter 83

260 shipped edit 175 shipped

Looks new. It has has the bubble level and cosine mount.

Looking for a micrometer 308 die for 308 win

Thanks

I’ve just built a new 6arc plonking rifle and thought I’d use one of these but all I can find in the wild are MOA scopes. If anyone has a clean Mil Match Pro ED I could use it.
Cheers,
LZ

Simple question. You have two tripods, one for the gun, one for rear support. One of them is smaller/lighter than the other. Which one goes where?

For sale: Hornady 6mm 110 A-Tips. 3 lots for a total of 6340 bullets.
Moving to .25 and 6.5CM, so I no longer need these.

Lot - 2220658 - 3940 total. 3 unopened cases of 1k and 1 case has 940 - $2364 shipped
Lot - 2220435 - 1000 in the case - $600 shipped
Lot - 2220545 - 1400 total - $840 shipped

I would prefer to sell in a minimum of 1k quantities. I am asking $0.64 $0.60/each shipped (prices above reflect that). PP F&F/money order or add 3% for regular PP.

For sale:
1. Lightly used Spuhr SP4006 mount, comes with box, wedge, screws and manual. This is 34mm tube size and 1.35" height.
Price: $330 shipped

2. Spuhr A-0003 Rails
Price: $40 shipped each

I accept PayPal Friends and Family and USPS Postal Money Orders. See my feedback, many happy customers. No trades.

$150.00 shipped


Excellent condition

For sale G48 Gen 5
Upgrades included
200 rounds through barrel

Halosun esp carry
Co witness sights
Apex poleymer trigger
Ghost inc 3.5lb trigger kit
Shield arms magwell
2-15 round shield arms magazines
Extended shield arms mag release
Cerakoted slide
T. rex arms holster
Tier 1 holster
Phlster enigma holster


Asking $1000 OBO

Is anyone having luck/found anything that works feeding 6.5 creedmoor. I have an XL750 and would love to hear some good news. Thanks.

Well used sig kilo 2200 for sale. Still works good. Upgraded to the 5k. Slight wear on edges. Plenty of ranges on animals and targets beyond 1000y. $150

Calling all gunsmith / machining experts! I am checking to see if it might be possible to redo the threads on a muzzle device? Specifically would it be possible to take the 7/8"x14 threads found in a Barrett QDL Muzzle Device and "open up" / rethread that muzzle device to 1"x14?

At this point, I am not sure if it would be better (or easier) to rethread the barrel or rethread the muzzle device? As my luck would have it, the barrel on my .50 BMG is threaded 1"x14, and the Barrett is the only suppressor that I can find in stock anywhere.

Needless to say, the threads on the muzzle device would have to be perfect or you could be "grenading" a .50
BMG suppressor with a baffle strike.

Thanks in advance!

Anyone aware of other options than the MDT? Thanks in advance!

Hey everyone just joined and am excited to get involved. Look forward to learning!

Looking to sell my Vortex Razor Gen 3 6-36 EBR-7D MIL
It’s been used for a few matches of course but has always had scope chaps on it.

Will ship in all original packaging and accessories. Will come with tenebraex caps as well.

Looking to get $2350 shipped

I have a new in box 6mm little bastard gen 3 muzzle brake. New in box asking 110 shipped Ppff

Loaded up some 260 with Federal gold medal primers. The primers were from about 2018 but always kept in a sealed ammo box . Had about every third one not go ‘boom.’ I think I’m getting a decent primer strike and even attempted to fire one of the rounds a second time.. no joy. Is it common to have a ‘bad batch’ of primers or am I missing something? Thanks!

I've got 5 friends and family 40% off codes for sitka if anyone wants one.
It looks like code hunt50 will take $50 off an order >$250 as well.

Codes will go by order of comments within this thread until they're all spoken for

JUST 1 LEFT

Reloading clearout: Forster Co-ax press, 7.62 LC brass, Hornady ELDM 178 Bullets, LE Wilson .308 Case Gauge, Dillon 10/40mm Die Set, Forster Dies, Priming tools

PP F&F, Zelle, or USPS MO only. Shipping outside CONUS (Alaska, Hawaii, etc.) is additional.

Forster Co-ax Press, includes shell plates, upgraded mounting hardware, drop tube, long and short handles ($30 upgrade), priming hardware, missing primer waste jar. (great overall shape, I was a really low volume reloader) - $399 $379$329 $319 $299 shipped & insured

2x 500 pieces of once-fired Lake City .308/7.62 brass, cleaned, deprimed, and swaged, all '12 LC headstamp, from Brass Bombers - $149 $139$129 $119 $109 shipped per 500 piece sealed bag

185x Hornady 178gr ELD-M .308 bullets - $69 $59 shipped

L.E. Wilson Brass .308 Win case gauge CGB-CGB-308W as new - $39 $35 $29 shipped

Dillon Precision 10/40mm 14398 Carbide Die Set (New in box) - $119 $109 $99 shipped

Forster Bench Rest Ultra Micrometer 6.5mm Creedmoor seating die U00062 (as new in box, used once for 100 rounds) - $119 shipped

Forster 6.5 Creedmoor Full Length Sizing Die (new in sealed package) - $49 $45
$39 shipped

Forster .308 Win Bench Rest Die Set 0004501 includes both seating and sizing die (as new in factory hard case, used once for maybe 100 rounds) - $119 $109 $99 $89 shipped

21st Century Super Precision Click Head Bench Rest Priming Tool with #2 shell holder (.308 family). LRP plunger installed, I can't find the SRP plunger but they are available from 21st Century (very lightly used, maybe 350 rounds?, I'm not sure what Gen it is) - $99 $89 $79 shipped

Sinclair International Hand Primer, considered one of the best priming tools, includes SRP and LRP plungers, #2, #4, #19 shell holders - $79 $69 shipped

RCBS Universal Hand Priming Tool, missing LRP (can be obtained easily from RCBS), installed with SRP, super fast primer system, low usage - $49 $39 $35 shipped

Like the title says, I'm looking to either sell or trade my in great shape zeiss lrp s5 5-25x56 mil. Would sell with or without the Nightforce xtreme duty 6 screw rings that are on it. Would sell just scope for 2300 shipped for scope with rings