Impact 6 dasher barrel 26”. 400 rounds through it. chambered by patriot valley arms
5/8x24 muzzle
$200 shipped

Will be shooting a bolt gun in .308 and a MSR 6.5 CM
My question is does a suppressor effect accuracy? In other words
will my groups get better or worse or stay the same as shooting with or without one.
Suppressor will be a 7.62SD AAC Fire arms shouldnt matter as just wondering if have a negative
effect on the groups. Thx

Selling my night rig due to an unexpected vet bill. Comes with what you see, here are the specs Q-Cherry bomb muzzle device, Proof Research 16” 1:10twist Carbon barrel, Aero Adjustable gas block and tube, Aero 10.5” Kodiak Brown R-One Handguard, Aero Upper receiver, Faxon 6.8SPC BCG, Radian Raptor LT, Ballistic advantage lower receiver, Aero lower parts kit, SOLGW Fighter Trigger, Giessle buffer tube, H2 buffer and spring, magpul CRT stock, 2 20rd Duramags. Extra: 11.3” Wilson combat barrel and gas tube. I also have 6.8SPC reloading dies if you’re interested in them. A few sratches here and there from use, was not a safe princess. Looking for $1,400 shipped to your FFL. If local to the San Antonio area I’ll throw in 90ish rounds.

ISR collection against cartel targets in Mexico?


Interesting

Selling my 25” 25 creedmoor quick change pre fit for a Zeus or valor action. This is brand new never been on a rifle
5/8x24 muzzle
$250 shipped

Hey all, been awhile since I've posted here and hoping to get the Hide's advice on an upper build I am looking at pursuing. I currently have a 16" 223 Wylde build that is my do all rifle based on a Seekins lower with LMT SOPMOD stock, Spikes T2 buffer, Tubbs flat wire spring, and Geissele SSA-E trigger. I'm looking to build two additional uppers, one in a 300blk for CQB work, and a 6mm offering as a DMR type platform to reach out to the 1000m territory and possibly use in PRS competition.

For the DMR build precision and reliability are my top priority, which has me in the pickle over 6mm ARC vs 6mm Max. I've read a lot about both cartridges here and elsewhere, and while 6mm ARC has more history and development, I'm concerned about some of the things I've read about reliability. Magazine feeding (although it sounds like that's been getting better with newer designs) and bolt lug/extractor failures. I've also read about the 6 ARC running excessively dirty particularly when suppressed, which I am planning on running a suppressor for this build (probably a flow through design that would hopefully mitigate some of dirtiness). That being said, 6 ARC sounds like it handles the heavier projectiles better that would be suited for long range work (I'm thinking about 20-22" barrel for what it's worth).

Now onto 6mm Max, I like the idea that on paper it sounds more reliable using a standard 223/5.56 bolt face. But I know it still requires proprietary magazines, and there's been very little development/literature out on the cartridge. I know it also won't handle some of the larger projectiles over 105 grain.

So should I try the new kid on the block that might fizzle out completely (6mm Max), or go for the more tested but possibly more finicky 6 ARC? I do reload so factory ammo availability isn't as much of a concern for me. I appreciate any guidance you guys have!

I bought a Tikka A1 308 from my LGS awhile back. Have taken it to the range a couple of times and it functions fine but the groups were a bit big - Well over 1MOA, but didn't think too much about it since I was shooting crappy ammo

Took it over to a buddies after shooting last weekend to work on it. While there he ran his bore scope down the barrel - Can't say I really know what I am looking at but it doesn't look good - Yuck!

Is that pitting? Rust?

How would you suggest I proceed with this barrel? Thoughts?

New Unopened, Hornady Auto Charge Pro.
I recently got an A&D scale and no longer need this.

Sold
Discreet PP or Venmo accepted.

Bought used less than 50rds and I never shot it. Great condition one small mark on left side of upper.

Barrel is a 20in 308ss

$sold upper
$450 barrel
Price shipped. Apple Pay ppff Zelle Venmo

Looking for range enhancers for vector x. Also looking for ARD

UPDATE 4/28: Ski feet now available!



-----

Hello Ckye users!

I've been making the adaptor feet for double pulls to allow the use of Atlas rubber feet, it has been a surprisingly popular product. But despite of what appears of a simple design, it's not too straightforward to make (if I have a bar feed, live tooling, Y-axis lathe, that'd be a different story), and it also bothers me that you still need to purchase the Atlas rubber feet separately.

So this holiday season I took some time to update the design, and now I'm happy to offer a direct rubber feet replacement for both of the double and triple pull Ckye bipod.

I will continue making the adaptors for a while, but think the rubber feet will work the best for most people at a lower overall cost. Both can be purchased here: https://dotechne.com/feet-and-reducing-sleeve-for-mdt-ckye-pod-double-triple-pull-bipod/

Have an extra .257 SS M24 Pro Gain barrel
8.25-7.25 5R 27” long blank 450$ shipped

Wilson combat 6.8 spc upper. Complete how I got it from the factory. bolt. Charging handel.
Been a while since I've used it.40 rnds at most down barrel. $800 shipped to you. Or trade for nice scope plus money on my end.

Looking for one- let me know what you have.

Tungsten Weights -22pcs

Fits foundation stocks

$350 shipped

PayPal FF or Venmo

Pitbulls are adapting and their methods are evolving.

Anyone have any? Hands on? Touch feel and taste? What do y’all think???

This is a catch and release for me... Its a Curtis Vector action spun up by 5x5 precision in 223 W/Trigger Tech trigger. I was told by the original owner that all was new when put together and has less than 60 rnds on it. To me - It looks very clean and everything is very smooth. I think I paid $1,650 shipped

I bought it here on the hide awhile back with the intent to build a 223... Have seen other 5x5 stuff and it Hammers, so was excited to get it but never got around to the build.


Needs a new home. $1,450 LAST PASS $1,325 Plus actual cost of shipping/ins

Thanks for looking

Possible trades +/- cash (only interested in fair to both)
-HK MR223
- NL Pure Bino's
- ? (Don’t be afraid to throw something out / Don’t be offended if I pass)

Recently traded for this from a fellow Hide member and decided to go a different direction. According to previous owner it has been used for approximately 750 rounds total. Comes with pilots: #14, #20, #50, and #72. Does not have Aztec, but can be purchased from AMP. Let me know if you have questions. Will come in original box.

SOLD shipped.

Brand new and never screwed onto an action. 1:8” twist and chambered by Proof (it’s a prefit). The muzzle is not threaded but there’s room to do so if you’d like. $525 shipped fully insured. Thanks

Used but good condition.

EGW Scope rail
20 MOA (packaging in photo is incorrect but included)
Fits Savage short action round back receivers.

$25 shipped

1x fired Norma 300 Norma Mag brass — 142 pieces.

Leftover brass from shooting 300 Norma SAAMI reference box ammo.

Selling because I reload my 300 Norma with Lapua brass now instead of shooting box ammo.

100 pieces of never-been-used unprimed 300 PRC Lapua Brass. Seal is broken on box.

Selling because last year I bought these in anticipation of a 300 PRC long-range build, but went with 300 Norma instead.

As a deal-sweetener, I’ll include 31 pieces of once-fired brass from Berger ammo that I put through my hunting rifle.

$170 TYD or best offer

Cause he fucked girls epstine introduced him to . The Brit’s are only looking to fine him a few million.

Opened box of 100.

Selling because I decided to run Berger 245 grain LRHT instead.

$55 TYD