Zermatt Arms 25% off cert. I will send a picture of the whole cert once deal is finalized. $175 OBO

Putting the finishing touches on my build. Only issue I’m having is that the magazine lips extend too far up and prevent the bolt from closing. If I release the magazine and hold it just a bit lower, I can cycle rounds through without any issues.

How do folks go about trimming magazine lips? Just flip it upside down on a piece of sandpaper and scrub ‘till it fits?

Build info
Action: ARC CDG LA
Barrel: 280AI take-off from a savage ultralight (proof carbon)
Chassis: Grayboe Eagle Pro
BM: greyboe M5 DBM CIP
magazine: MDT polymer 3rd LA 30-06
Triggertech primary

I have a Faxon 14.5" Gunner profile barrel. What do I need to know about the Allen Engineering or possibly Otter Creek silencer fitment? OCL makes a couple mounts that thread onto 1/2x28 that emulate the collar and AE makes this model they say needs less room: AEM-4

Like new only unboxed and played with. Never fired on rifle. $1200 shipped and insured.

Anyone have a link to the oral augments taking place? My GoogleFu is not working...

Mounted for some dry fire otherwise new. 240 shipped

Ashbury Precision Ordnance ASW-338, FDE, .338LM, Surgeon action, Rock 5R SS bbl 1-9.4, 27", Surefire break (threaded 3/4x24), push button adjustable side folding stock, 40 MOA monolithic top rail, full length bottom and side rails, Huber two stage trigger, 2 10 round magazines. Includes a NIB Schmidt-Bender 3-20 CCW Mil, H2CMR reticle. Less than 100 rounds fired, photos and borescope video on request. Load data for the Hornady ELD-X 285 and Berger 300.

Extra rifle, just don't need 4 338's.

Cory Trapp
Gunsite Academy, Inc.
CoryT@<remove>gunsite.com

Proof Comp Contour Stainless 6.5cm 26” TL3 prefit

Brand new screw into action never fired. The action screw bottoms out slightly to the thread, but it still threads on and off the action without any issues.

$420 shipped obo

I have a brand new vortex razor Gen 3 MIL with EBR 7D reticle for sale. $2500 shipped

I have 300 of these.

100 bucks shipped. Thanks.

This is just blocks from where I eat breakfast sometimes.

Two 'dark skinned males, one wearing a Muslim turbine' tried to block a church exit with a rock. Armed church goers weren't having it. Shots were fired and one 'dark skinned male' exited a white van brandishing an AR15 before fleeing north.


Austin's news channel also covered it but of course left out the description of the two terrorists.

Looking for a new or used PRI thumb wheel gas block flip up sight for the mk12 mod 0. I think it’s Part No 05-0025-G1. Please let me know if you have one for sale. Thanks

Lightly used.
I have a .267 bushing that I’ll include.

Asking 150 shipped
Thanks

Hey everyone, was curious if anyone has had the same problems I've had with superior shooting systems 6xc loaded ammo. It is the coated 115 dtac bullet with nose ring. Just finished my custom 6xc Kelblys atlas tactical with a kreiger 1-7.5 twist barrel finished at 22". I ordered 100 rounds of this ammo just to get some rounds through it and have fire formed brass. First round was VERY over pressure. It had gas leakage around the primer and part of it was deformed. I reluctantly chambered and fired another round, and although no primer leakage, still over pressure, with heavy bolt lift. Ive fired several more and some are heavy bolt lift, some are fine. Avg velocity was 2920 fps with a sd of 20, and groups are no better than 1.5 inches at 100 yards, maybe my rifle just hates this ammo, but for how he markets this stuff id expect it to at least be somewhat consistent and safe.

I know i haven’t done over 300 pieces of brass with it..comes with everything listed in pic plus inline fab quick attachment

$800 and maybe a little on shipping depending where ya located

I’ve got 6 Remington M24 triggers that I am selling. These triggers are out of my personal collection and were going to be used on a few clone rifles I was thinking about doing. Plans change so I’ll offer them up. I will sell these for $550.00 each, shipped to your door. Don’t bust my balls on the price either, I know how rare/hard to find these are.

USPS money order, certified check, or personal check only. I DO NOT accept credit cards or electronic payment.

Shipping it to the lower 48 only….. no exceptions.

Like new. Just got them 9/27. Mil reticle 15x56 bono with ED glass. In the box

$SOLD shipped

I'm running a 1-6 PST on a short handy bolt gun. I'm looking for a low profile throw lever that gives me a bit of purchase to change power, but isn't too tall to be obtrusive. Anyone have any suggestions? I'd be happy with a file for a printable one as well.

The subject line pretty much sums it up. Has your employment of a red dot made you a more precise pistol shooter? Thanks in advance.

I've got a couple like new Seekins 45 or 90 degree AR safety selectors.
Asking SOLD shipped in the CONUS each.
PM if interested
Thanks

Scalarworks Aimpoint T2 1.93” LEAP Mount. Used but in good condition. Also works with the Aimpoint compm5. Comes with Aimpoint tool and screws to mount optic.

$85 shipped.

I need to clean a few TBAC suppressors, and I run the Area419 suppressor mounts inside the cans. CLR seems to be very good with removing carbon, but it is not good for these nitrided steel mounts. Just curious how many of you remove adapter before cleaning, and how much effort should it take? I'll typically heat up things I blue loctite and they come off no problem, but I'm not sure how much carbon I may be fighting, or did the mount mostly protect the threads from this? Not sure. I bought the Primal Rights stand and spout as it looked like a good way to set up for proper cleaning. Advice appreciated.

Brand new in box Kestrel 5700 Elite with Applied Ballistics and Link.
$650 shipped

This barrel is cut to 19.25" with a 6.5 creedmoor 1:8 twist, threaded for a Coup de Grace action. Click the link to purchase. https://straightjacketarmory.com/product/coup-de-grace-proof-cf-pre-fit-barrel/