If anyone’s getting out of the Reloading game and has a MarK 7, would prefer a revolution but interested in others. Let me know. Got cash ready

I am planning on purchasing a JP LRP-07/LRI-20 set for a new build. I know that the barrel sits off-center from the hand-guard (ID of 1.75), but cannot for the life of me find how much that offset is. I want to make sure the gas block I select will fit under the hand guard. I emailed JP asking this question and they just mention that all of their gas blocks fit under their hand guard. Their gas block lineup seems to range from .77”-.81” HOB. But some other gas blocks like the SLR 8 have a HOB of ~.91, so I am wondering how close that comes to interfering with the hand guard.

Can anyone with an LRI-20 upper answer this question or even measure the offset for me? Thanks!

Going to be moving to Morgantown, WV for work in a few weeks. Started looking for gun stores and shooting ranges. Found Harry Jones gun range that offered up to 1000yrd, any others worth looking into?

Don’t have a house yet so I can’t give a local area yet other than where work is, but I will absolutely not be living in the city, or PA, VA, or MD.

PLEASE DO NOT ASK QUESTIONS HERE, SEND A PM
this started as a factory r700 sa rh.
trued face of receiver
trued receiver threads
trued lug abutments
lapped lugs
bolt handle threaded and tactical bolt knob installed
glass bedded action to stock
.250 thick custom ground recoil lug installed
opened factory scope holes up to 8-40 and installed EGW rail
chambered and threaded 5/8x24 ace barrel in 6.5cm
installed Timney impact trigger
greyboe phoenix 2 stock with adjustable comb and LOP
hawkins M5 bottom metal.
the price listed DOES NOT INCLUDE- the suppressor, bipod, scope, rings, magazine, arca rail, tripod.
$1960 shipped FFL to FFL
I cannot take paypal or venmo
I can take zelle, cash app, usps mo, cert check.

Catch and release on this one, was planning a swim, but switching to 7prc. Not sure on round count. Looking to get $sold.

For the guys who are using McLube 1700L PTFE Dry Lubricant and Mold Release Agent where are you purchasing it at? Thanks

A while back there was a big ruckus about CC Co.s reporting purchases to the Feds. I think I remember the reporting was on firearms. Never did get the truth whether the CC Co's were reporting purchases from stores like Mid South, Natchez , Midway, ect.
Anyone know what the outcome of this was ?

Used in a few matches and works great. Has a tiny scratch on screen, but doesn't cause a issue. Asking $280 shipped pp ff,venmo zelle.

Trades
Arken epl-4 6x24 vhr mil
Mdt hunter stock or xrs 700 sa
Howa mini BA
I'm sure there's something else.

MDT CKYE-POD Gen 2 Heavy Duty Arca for sale! Bought it roughly a year ago to help balance my rimfire build. Unfortunately the rimfire gun sits in the safe most the year.

Arca Mount
Single Pull
Has some cosmetic scuffs on the grip tape portion
More pictures below in the comments

$650 shipped CONUS

ckye pod gen2

I'd like to introduce myself to the forum.

I've been a firearm enthusiast ever since I can remember watching old westerns as a kid. Always wanting a slick lever action and a shiny revolver. Now that I'm a little more grown up (36 yrs old) I've been able to acquire a few of these things and work my way into the hobby. I would not consider myself an avid shooter, or collector. But I do what I can, when I can. I've been a little into 1911s for the past couple of years, and now back into rifles. I've been searching for a nice .223 bolt gun to add to my collection.

I live in the more southern part of Western NY. I'm lucky to have a little range in my back yard, and neighbors that don't mind the noise.
I'll be cruising this forum keeping an eye out for a DIY shooting table and whatever other good information I can find.

After moving to Western NY it’ll be a while until I can get my pistols back (crazy permit process…) so I’m a rifle guy for now. I shot bullseye pistol previously and found this site figuring out how to get into PRS/NRL.

For now just shooting a CZ457 and my ARs until I get my rifle fundamentals figured out.

I have a slighty used upper i put together
Sgt Of Arms 16" 1:7 .875 gas block
Bcm receiver and upper parts
Aero Atlas one handguard 12.7
Aero adjustable gas block
Rifle length gas system

Ran this as my yote gun and has around 100 rounds down it. Even with a night vision scope mounted it shot around 1 moa with 75gr eldm factory ammo. Building a bolt gun is only reason im selling. Barrel order was last year around August.
$500 shipped with headspaced bolt for barrel no bcg or charging handle.

or

$500 for barrel, headspaced bolt, gas block and tube.

Like new. 135$ shipped
1.26" height
0 cant
35mm

1100 shipped thanks

My department is trying to form a sniper team. We currently have Federal GMM 168 grain 308 ammo. Very accurate but terminal ballistics suck.

Looking at switching to the Hornady 168 grain ELD Match or the ELD Match AR.

Does any one know that actual bullet difference in the ELD vs the ELD AR?

Any other budget friendly options for 308 duty ammo? Thanks in advance.

I’ve got an extra Eotech thermal I don’t need. Looking for $13k obo

Only mounted twice, less than 20 minutes running time on this one.

I have a like new MUB MOD DOS is OG Green Anodizing.

I JUST received the two True North Raven MD Spacers after a pretty extended wait... So they are brand new, just installed. I have two Area 419 Arcalock Clamps attached to those ( I have all locking teeth included but removed from the clamps).

I would like to sell all together, but would part out the clamps or TNR MD Spacers individually, as pairs (Both TNR spacers, Both Arcalocks, or all four etc.... This is just to save me the headache of shipping costs...)

Total cost here invested:
MUB MOD DOS: $185
TNR MD Spacers: $100
Arcalock Clamps from 419: $150ish

$360 for everything - shipped CONUS...Paypal FF or Venmo preferred, or GS just cover fees.

If Separating: shipped
MUB MOD DOS (like new) $170
TNR MD Spacers (Like new in bag) $95 for both
Arcalock Clamps (lightly used) $110 for both

Firearm stocks just the stripped empty stock can be shipped by any carrier with no special rules correct?

So this is probably the closest NASA came to losing a shuttle.... without losing a shuttle.

Once again corner cutting and trying to get out cheap.

They got damned lucky!

This just crossed my radar screen today... and I had no idea. Long gone by then. But... damn. When will these retards learn that stepping over dollars to pick up nickels is fucking retarded?

Cheers!

Sirhr

So I've been shooting Black Hills 77gr OTM out of my 10.3 and 12.5. But I'm thinking of switching over to either the 50gr TSX or 77gr TMK. This is for HD and I stumbled across some articles by Molon and it got me to thinking the 50gr might be an upgrade over the 77gr OTM i have now. But the 77gr TMK seems to be better than the 77gr OTM. That's why I included it also. Any insight would be appreciated.

We don't have "hate speech"; we don't have disinformation or misinformation; we have free speech here.

Now we understand in civil society, we want to maintain a certain level of decorum; we need to be civil with each other when engaging in conversations as normal people do. When we converse, we don't always agree; I like Tits, and Mazerblade likes his boyfriend's ass, and that's ok.

I can say he likes his boyfriend's ass because it's my opinion based on my many years of experience reading his posts. And the fact, for like 18 years, I asked him for naked pictures of his supposed baby's Momma, and none ever appeared, so that led me to believe it's a guy, not a girl, hence my response. Mazerblade could be the biggest Rump Ranger on this site, and it shouldn't matter to anyone viewing it. Now, if he reported me for this, it would get rejected. Because a forum is all about exchanging ideas and I am simply presenting my opinion, I have an idea it's correct, but I am not 100% certain. Because I am not 100%, you can't rule on it, as I haven't completely ruled it out, I am wrong, but I could be right. Get it.

If you get called a dumb ass, or some other variation of that, it's not hate speech; it's that person's opinion of you. Simple, not hate, just a judgment call. Judgment calls are made every day about a variety of topics, so don't sweat it. You can make one too, but don't make too many because of you devolve into a name-calling post, both get removed. We can disagree; just try not to fight it out in public beyond two pages.

You have an ignore button, rather than tattling on someone for calling you a bad word; I know words hurt today as much as sticks and stones. apparently, fear not; you can take matters into your own hands and prevent them from ever darkening your door again. If you put them on Ignore, you hide their words. Hiding words mean you can't be offended by them cause they will be invisible. Invisible means you won't see the hurtful content directed at you.

I get it, we want the forums to be our picture of perfect, but perfect is different for everyone. I envisioned this as a squad bay, not a safe space.

In a civil society, we need to be conscious of each other when talking; however, that doesn't mean we can't have emphasis or some extra hyperbolic language attached to speech. It happens; I do it a lot to emphasize my point, so don't sweat it.

Doesn't mean we can motherfuck everyone we speak with here, but if it's warranted or someone is acting a bit hard-headed, a well-placed cuss word never hurts anyone.

FN SCAR 17s

Geissele Super SCAR trigger

Midwest industries Extended Handguard

Mototech engineering Scarburator Gen-3 (included not installed)

1 Black 20 round mag (light use)

5 FDE 20 round mags new

1 Black 20 Round Mag new

This is a Belgium import if that means anything to you. Seems they are more desirable from what I can tell.

Will include the factory cardboard box
Price: $3,200 Shipped CONUS

Payment: PayPal FF or add fees or Zelle

Barely used. $130 shipped.

Hello,

I recently bought a used BAE UTM thermal and would like to have a manual but can not find any downloads online. If someone has one of the manuals would you care to post some pictures or DM me?

Thank you!

2 Area 419 Omega thread pattern suppressor mounts. Both only briefly used and in new condition.

2 5/8x24 universal adaptors brand new
2 1/2x28 universal adaptors brand new

Also have a thread protector that goes on any universal adaptor.

Rather sell it all together for a big discount instead of splitting it all up together if possible.

$175 for all of it shipped

PayPal FF, Venmo or Zelle