-
Having trouble using the site?
Contact support -
Not receiving emails?
We're currently aware of an issue with our email provider and working to fix it as quickly as we can! Appreciate your patience here!
View thread
Posts
Manners TCS vs Foundation stock
- By Mark_Dorman
- Bolt Action Rifles
- 22 Replies
So I currently run a Manners PRS TCS and really like it. I've been interested in trying a Foundation stock for my centerfire build but no one at my club seems to have one. I'm trying to figure out which model Foundation stock has a similar grip to trigger spacing as the Manners TCS.
I am not too concerned with the differences in the forend. I'm open to trying pretty much any of the models assuming it fits my hand correctly. Picture for attention
I am not too concerned with the differences in the forend. I'm open to trying pretty much any of the models assuming it fits my hand correctly. Picture for attention
SOLD RBROS 6.5 CM
- By B-Ricks
- Buy - Sell - Trade
- 7 Replies
I have much more feedback on Rokslide as BRTreedogs
I just don't shoot this rifle like I thought I would. And between work and anxiety I probably won't ever go to a match.
RR Rem action
The face, threads, lugs all trued up along with lapping the lugs once finished
The normal Remington treatment
Ceracoated Satin Black.
30 Moa Area 419 Rail
Spiral fluted Bolt
LRI Bolt handle
24" 1 in 8 twist 6.5 cm bartlien, not sure profile.
.938 @ muzzle
10 rd accurate mag
KRG Bravo
Spigot mount w pic rail.
Full forearm arca rail.
Snyder steel but pad spacer.
All other original krg Bravo accessories.
TT Special Pro Curved PVL coated set at 1.5
Apa Little Bastard self timing brake.
Round count 400ish.
This rifle hammers 147 eldm factory and I tried one load of 140 hybrids.
Shot a .867 10 shot 100 yrd group, never worked on the load more.
I have 300 pcs of new hornady brass, 130 twice fired and a 1200 berger 140 hybrids to discuss if you buy the rifle.
$1400 Shipped
Willing to sell BA separately for $1000 shipped with no trigger.
Do not want to sell krg unless Ba sells.
$1300 locally to Terrebonne OR 97760
I just don't shoot this rifle like I thought I would. And between work and anxiety I probably won't ever go to a match.
RR Rem action
The face, threads, lugs all trued up along with lapping the lugs once finished
The normal Remington treatment
Ceracoated Satin Black.
30 Moa Area 419 Rail
Spiral fluted Bolt
LRI Bolt handle
24" 1 in 8 twist 6.5 cm bartlien, not sure profile.
.938 @ muzzle
10 rd accurate mag
KRG Bravo
Spigot mount w pic rail.
Full forearm arca rail.
Snyder steel but pad spacer.
All other original krg Bravo accessories.
TT Special Pro Curved PVL coated set at 1.5
Apa Little Bastard self timing brake.
Round count 400ish.
This rifle hammers 147 eldm factory and I tried one load of 140 hybrids.
Shot a .867 10 shot 100 yrd group, never worked on the load more.
I have 300 pcs of new hornady brass, 130 twice fired and a 1200 berger 140 hybrids to discuss if you buy the rifle.
$1400 Shipped
Willing to sell BA separately for $1000 shipped with no trigger.
Do not want to sell krg unless Ba sells.
$1300 locally to Terrebonne OR 97760
SOLD JP Enterprise LRP07 6.5 Creedmoor
- By BoRepeater
- Buy - Sell - Trade
- 3 Replies
SOLD: JP Enterprises LRP-07 6.5 CM Rifle 22" with Magpul PRS stock :SOLD
The rifle is in excellent condition, very accurate, with less than 100 rounds fired.
I added a TriggerTech Diamond AR-10 trigger so 2 triggers will come with it, JP/TriggerTech.
Bipod/scope/rings not included.
Shipped to your FFL in CONUS. Buyer pays for any insurance.
PM if you have questions.
Build list:
6.5 CREEDMOOR BARREL, 22" MEDIUM CONTOUR, 1:8 TWIST, BLACK TEFLON
COMPENSATOR, 5/8"-24 TPI, .875 OD, .350 EXIT, BLACK
LONG THERMAL DISSIPATOR, BLACK, .750 BBL
SLR SENTRY 9 ADJUSTABLE GAS BLOCK (MUCH BETTER/RELIABLE THAN THE JP ONE)
LOW MASS BOLT CARRIER, BRIGHT FINISH
RIFLE SILENT CAPTURED BUFFER SYSTEM WITH EXTRA SPRING KIT
ENHANCED BOLT ASSEMBLY .308 (HIGH PRESSURE), INCLUDES FIRING PIN, MAG PHOSPHATE FINISH
TRIGGER ENHANCED RELIABILITY 3.5-4.0 LBS (TRIGGER SPRING: YELLOW, HAMMER SPRING: RED)
MAGPUL PRS GEN 3 RIFLE STOCK, BLACK
ERGO TACTICAL DELUXE PISTOL GRIP
The rifle is in excellent condition, very accurate, with less than 100 rounds fired.
I added a TriggerTech Diamond AR-10 trigger so 2 triggers will come with it, JP/TriggerTech.
Bipod/scope/rings not included.
Shipped to your FFL in CONUS. Buyer pays for any insurance.
PM if you have questions.
Build list:
6.5 CREEDMOOR BARREL, 22" MEDIUM CONTOUR, 1:8 TWIST, BLACK TEFLON
COMPENSATOR, 5/8"-24 TPI, .875 OD, .350 EXIT, BLACK
LONG THERMAL DISSIPATOR, BLACK, .750 BBL
SLR SENTRY 9 ADJUSTABLE GAS BLOCK (MUCH BETTER/RELIABLE THAN THE JP ONE)
LOW MASS BOLT CARRIER, BRIGHT FINISH
RIFLE SILENT CAPTURED BUFFER SYSTEM WITH EXTRA SPRING KIT
ENHANCED BOLT ASSEMBLY .308 (HIGH PRESSURE), INCLUDES FIRING PIN, MAG PHOSPHATE FINISH
TRIGGER ENHANCED RELIABILITY 3.5-4.0 LBS (TRIGGER SPRING: YELLOW, HAMMER SPRING: RED)
MAGPUL PRS GEN 3 RIFLE STOCK, BLACK
ERGO TACTICAL DELUXE PISTOL GRIP
Reloading Equipment NIB Dillon Precision xl 650/750 Conversion Kits for 38/9mm and 222 Mag/.223/5.56mm/22 Nosler
- By olive drab
- Buy - Sell - Trade
- 1 Replies
SOLD Trigger Tech Remington 700 Diamond two stage trigger
- By Btar21
- Buy - Sell - Trade
- 1 Replies
Like new Trigger Tech Diamond two stage with standard safety and a pro curve shoe
$250 shipped
$250 shipped
Night Vision L3 CRATOS - Thermal
- By tinycrumb
- Buy - Sell - Trade
- 3 Replies
Hi everyone. I have up for sale a beautiful & capable thermal unit, the L3 CRATOS. This is an incredible little thermal. Super lightweight and has a lot of features, like auto nuc and color screen. White Hot, Black Hot or Multi-Color, and it's 640 x 480 17 µm with 60 Hz frame rate.
First, let’s get the bad stuff out of the way:
I purchased this unit last year here on Snipers Hide and was lied to and scammed by the seller. He ended up stealing some money from me, failing to send me the remote pressure switch and the manual, and deceived me about the condition of the picatinny mount.
What this means, is that the unit itself is 100% working condition, and performs great. However, I don’t have the remote pressure switch or the rubber eye cup. The picatinny mount is also slightly damaged where the locking lever on the larue mount has been broken off. What this means is that the picatinny mount mounts just fine but when you push in the larue lever to “lock” it for extra piece of mind, it’s not actually locking the lever in place. That said, the mount is so snug and tight that I don’t think you’d ever need this … but full disclosure.
I have not tried to contact L3 to get a new mount or a paper copy of the manual, but I assume this could be done without too much trouble.
I do have a PDF copy of the manual that I can provide to the buyer.
Alright, so now that we’re done with the caveats, on to the good stuff:
This unit is really amazing. It’s barely bigger than a Skeet, but with a few awesome features that the BAE units don’t have like a color screen, auto-gain and auto NUC. It works great as a handheld where it flips the screen so the controls are ergonomically in your grip. And then it really shines as a clip-on in front of a LPVO.
I had seen a photo of a devgru operator using this as a clip on in front of their mil-spec 1-8 NF ATACRs and that’s how I chose to run it as well. It’s an extremely capable setup. Horta also has some great reviews and information on the unit if you search through the Hide archives.
It’s got some surface wear on the ruggedized coating, I believe it’s cerakote over anodize, but other than that, no damage to speak of. It’s been really good battery life for me and does not have any parasitic drain. It’s pretty much what you’d expect from a modern 640x mil thermal.
Please check out the pictures and if you have any other questions please let me know.
Asking $8500 shipped.
First, let’s get the bad stuff out of the way:
I purchased this unit last year here on Snipers Hide and was lied to and scammed by the seller. He ended up stealing some money from me, failing to send me the remote pressure switch and the manual, and deceived me about the condition of the picatinny mount.
What this means, is that the unit itself is 100% working condition, and performs great. However, I don’t have the remote pressure switch or the rubber eye cup. The picatinny mount is also slightly damaged where the locking lever on the larue mount has been broken off. What this means is that the picatinny mount mounts just fine but when you push in the larue lever to “lock” it for extra piece of mind, it’s not actually locking the lever in place. That said, the mount is so snug and tight that I don’t think you’d ever need this … but full disclosure.
I have not tried to contact L3 to get a new mount or a paper copy of the manual, but I assume this could be done without too much trouble.
I do have a PDF copy of the manual that I can provide to the buyer.
Alright, so now that we’re done with the caveats, on to the good stuff:
This unit is really amazing. It’s barely bigger than a Skeet, but with a few awesome features that the BAE units don’t have like a color screen, auto-gain and auto NUC. It works great as a handheld where it flips the screen so the controls are ergonomically in your grip. And then it really shines as a clip-on in front of a LPVO.
I had seen a photo of a devgru operator using this as a clip on in front of their mil-spec 1-8 NF ATACRs and that’s how I chose to run it as well. It’s an extremely capable setup. Horta also has some great reviews and information on the unit if you search through the Hide archives.
It’s got some surface wear on the ruggedized coating, I believe it’s cerakote over anodize, but other than that, no damage to speak of. It’s been really good battery life for me and does not have any parasitic drain. It’s pretty much what you’d expect from a modern 640x mil thermal.
Please check out the pictures and if you have any other questions please let me know.
Asking $8500 shipped.
Attachments
SOLD Tikka swept bolt handle
- Buy - Sell - Trade
- 2 Replies
From anarchy outdoors. Like new.
$90 shipped
$90 shipped
Accessories Wts field optics pro39 tripod
- By Mumzergadol
- Buy - Sell - Trade
- 8 Replies
Heavy duty, us made carbon tripod with bowl head arca clamp. Extremely sturdy and stable but more than I need to lug around hunting. Selling to fund smaller lighter one.
This thing is anti tank stout. Believe they were rated at 150lbs, it is extremely stable and very capable absorbed the recoil of a light 30mag.
It's tall enough for me to comfortably shoot standing at 6'3.
Model is Pro-39Mil. Not sure they are still available but street price was about 950 with accessories and feet spikes. Includes carrying bag that had some salt on it from the back of my truck.
Tripod itself is excellent. Arca surfaces have surfavlce wear from trying to hang onto a 300mag
The weakest part of the unit is the clamp quick release which feels a bit cheap to me but the ball action and tensioner really are pretty great.
640 shipped.
This thing is anti tank stout. Believe they were rated at 150lbs, it is extremely stable and very capable absorbed the recoil of a light 30mag.
It's tall enough for me to comfortably shoot standing at 6'3.
Model is Pro-39Mil. Not sure they are still available but street price was about 950 with accessories and feet spikes. Includes carrying bag that had some salt on it from the back of my truck.
Tripod itself is excellent. Arca surfaces have surfavlce wear from trying to hang onto a 300mag
The weakest part of the unit is the clamp quick release which feels a bit cheap to me but the ball action and tensioner really are pretty great.
640 shipped.
SOLD New in Sealed Box - Haley Darter Black
- By RedBreast21
- Buy - Sell - Trade
- 11 Replies
Brand new in box. Never opened. $325 $300 $290shipped CONUS. No Trades at this time. Thanks
