Posts

Jeremyhunter · Sep 15, 2024

Up for sale is a M.U.B and wing mount from mub.

*M.U.B.

Multi-Use-Block The M.U.B. is a superior quality, multi-faceted mounting system designed to adapt to the individual's needs. Created by a top USASOC military sniper for use in the field when missions are critical to the safety of his team, The M.U.B. has stood up to the tests of military and...

www.themub.com

*WING

The Wing is a fully integrated attachment designed specifically to open up the possibilities of what The M.U.B. can accomplish for you in any scenario. Each arm can bear the weight of your heaviest DSLR to your lightest thermal scope, and more. Mount everything you need to: See it. Film it...

www.themub.com

Used, some scuffs, works just fine.

$120 shipped as pictured.

Inthearena · Jul 2, 2024

Hey fellas,

Anyone have a source, or can recommend a maker of Kydex magazine pouches for the AT-X mags.

D

Kiba · May 7, 2023

Up for sale is my LRB M25 built by Ted Brown. I just don’t shoot my larger semi-autos that much anymore and haven’t shot this in quite a few years; need some room in the safe for another bolt rifle build, so it’s finally time to go.

Rifle is in excellent overall condition and has 800 rounds through it, all Sierra 168s with a mild load of H4895.

I started gathering parts for this rifle around 2002. It took quite a while to gather all the TRW USGI parts for this build, plus I had to wait almost 2 years for the rear lugged LRB M25 receiver from pre-order to shipping before sending it to Ted Brown for assembly. With nice USGI parts getting harder and harder to find I’m not sure I could build another one like this.

Rifle details:

LRB M25 rear lugged receiver (rear lug not used by JAE stock, but I wanted the option to pillar bed and torque screw the action into a wood or Mcmillan stock in the future.)
All USGI TRW parts (trigger group, bolt, gas cylinder, op rod) The bolt, gas cylinder, and op rod were new in wrapper. The trigger group was in used but excellent condition and was sourced from Elmer Balance in Devine, TX.
Sadlak NM spring guide and Sadlak TiN coated gas piston
Tubb silicon chromoly op-rod spring and hammer spring
LRB 0 MOA and 20MOA scope rails (20 MOA rail on the action right now.)
JAE Gen 3 stock in coyote tan with thumbscrew adjustable quick detachable cheekrest, forward and rear bottom picatinny rails, left and right side QD sockets, adjustable palmrest, adjustable buttpad spacers, and adjustable barrel tensioner system. I think the only options I didn’t order were the front side rails. Took 31 months to get it, and now that MDT owns them they aren't making the M1A stocks anymore. I do have the original box for the stock along with spare buttpad spacers, palm rest spacers, etc, but I forgot to get it out of the rafters to take pics.
Standard solid and Schuster adjustable gas cylinder plugs
Rear hooded ½ MOA and front thin blade NM iron sights
Smith Enterprise muzzle brake
Smith Enterprise extended bolt stop

Ted Brown did the following work:

Assemble and headspace with Criterion medium weight chrome lined 10 twist barrel (Ted’s recommended barrel at the time I had it assembled—shoots great and easy cleaning.)
Unitize gas system per AMU NM specs (screwed and staked)
NM 4.5# trigger job

I also have the following extras to go with the rifle since I’m getting away from the M1A platform…

Spare mainsprings & trigger springs
Spare ejectors, extractors, and springs
Spare firing pin and spring
Dewey muzzle boreguides custom made to fit the Smith brake
Sinclair chamber solvent trap
Handguard pliers and castle nut pliers
Drills with handles for cleaning gas piston
Gas cylinder wrench
Spare castle nut
Rotating chamber brushes
Bolt takedown tool
Badger bolt roller greaser
Spare bolt rollers
Spare handguard clip
3x 10 round mags, 11x new in wrapper USGI 20 round mags that haven't been used, and 3x VG condition USGI 20 round mags that were used to shoot. If you live in a state where >10 round mags aren't legal, I'll have to see what mint used USGI 20 round mags are going for and I can take that off the price.

Hate to see it go because I have so much time and money put into finding all the parts and having it built, but it may as well go to a good home where it will be used and enjoyed rather than just sitting in the back of my safe.

Asking $5000 shipped and insured for everything listed above.

$3600 for barreled action, spares, tools, and mags

$1500 for JAE Gen 3 stock -- I would prefer to sell the barreled action before selling the stock separately.

Payment via USPS MOs, bank certified check, personal check (will ship once they clear), wire transfer, or Zelle. If you’re somewhat local to the Sacramento, CA area I’d be willing to meet you at your FFL within a reasonable driving distance to save the shipping hassles.

Unfortunately shipping is going to be kind of a bitch now that UPS will no longer accept even firearm *parts* without being an FFL yourself and having a signed FFL contract on file with them (which comes along with all kinds of legal requirements including a documented and auditable shipping training program and such) so my plan is to have my FFL ship the rifle to you and I’ll have to ship all the parts and extras separately via USPS Priority since they have no policies against an individual shipping gun parts.

iliket0drum · Aug 18, 2024

Selling my Tangent Theta 5-25x Professional Gen2xr reticle with aadland throw lever

T1nn-Man · Sep 14, 2024

Looking to sell as I went another direction with my optics. The Razor is in great shape with a water machine works battery cap. Acro is in great shape with no moisture intrusion. Both are sitting on badger mounts. Looking to get $2600 obo (open to trade offers).

Shootermagavin · Sep 15, 2024

What body measurements should I be measuring before ordering a 'custom' stock?

And what measurement translates into what theoretical LOP?

Fox One · Sep 21, 2024

Hello,
I am new to the forum, and have recently purchased and mounted a Burris XTR Pro SCR2 5.5-30x56mm 1/4mil scope to my Surgeon Scalpel 6 .5 Creedmoor. I have question regarding the illuminated reticle and how much of the actual reticle should be illuminated? I have noticed that on my scope, only the cross hair and a 1/2 mil beyond in all directions is illuminated. is that normal for this scope?
Thank you in advance.
Ron

Addendum: Looks like it was a battery issue, and a new Cr2032 seems to have been the answer.

Bender · Sep 17, 2024

Technology is cyclical, these are now in high demand. I will pass on savings to you, only $200 a pager or $35k for the lot.

I will also trade these for a KMW Sentinel, or an LRI or “settle” for a TacOps.

I know what I got. No low balls, (that means you @Threadcutter308, and no jewin down @powdahound76)

Payment terms are $500 a month at 43% interest fir 360 months. They are Jewish pagers after all.

squib · Sep 18, 2024

Gentleman, hopefully we can reach a conclusion.

Q: Is Frank a short hot dog?

Discuss

Phantom_stranger · Aug 31, 2024

As New. These have never had a piece of brass run through them.
Redding Type S Match Bushing 3 Die Neck Sizing Set and Titanium Bushings. The bushings are .336 and .337.
$200 Shipped to lower 48 States.
I have feed back on a popular AR forum.

Someone made me an offer I couldn't resist, so I selling the rest of my 308 stuff.

Possible trades are 22LR Match ammo. Cz 457 Benchrest NRL22 paraphernalia. A high-magnification scope with a floating dot reticle. I also have a few boxes of Federal GMM, Black Hills 308 175gr SMK I will be selling shortly.

chase723 · Aug 9, 2024

K&P 32” 1:8 twist 375 RUM barrel for TL3 short action. Muzzle threaded 3/4x20. 1.35” diameter shank for ~5.5” and then tapered to 1.1”. Has flats machined into the barrel for easy changing with switch barrel setup. Chambered by Michael DeLoach of 9 Run Gun. Weighs 8lbs 7oz.

You read that right. Poor man’s Cheytac. This is a 375 RUM barrel that I had cut for my TL3 short action to shoot ELR. If you are looking for the most affordable way to get into ELR, no question this is it. This barrel shoots the 390gr A-tip at ~ 2820fps w/ 105.3gr N570 into ~1/2 MOA (see pic below shot at 300 yards). Before I did this I called Zermatt and Ray said go for it, the action can handle it…so I did. Supersonic to 2450 yards at a DA of 5000ft…I got greedy and wanted even more out of it, and had it throated a little longer but it didn’t like it. SAMMI spec was fine, so I set the barrel back an inch (from 33” down to 32”) and now it has a fresh chamber in it that I’ve never even shot. I suspect it will be just like it was before…which was awesome.

Hornady Dies with micrometer seater.

74 pieces of Norma Brass. Started life as 300 RUM and necked up for 375 RUM. (Just as an FYI if you’re wondering, 375 RUM ADG brass pressured out early and gave me a weird bolt click and signs of incipient case head separations. Usually ADG brass is the opposite of that but this happened in 2 separate batches so I recommend using Norma brass. In this instance it’s WAY better).

Want to sell as a package. $550/shipped. If someone wants to shoot the 390gr A tip, I have several hundred (not sure exactly how many) that I could work into the deal. Otherwise will sell separately after barrel etc sells.

Thanks,

Chase

m1943 · Sep 18, 2024

I am trying to more accurately identify this scope that I happen to have. Browsed some web sites, pricing (on new units) varies from $2,999 up to nearly $4,300 , all of them seemingly 5-25x56 PM2s. But there are differences in the part numbers. Can anyone enlighten me on this? I am trying to gauge how much my scope is actually worth...
Thanks

david walter · Sep 20, 2024

We bought a small (<50 acres) farm in MS, and are headed there soon. The former owners took their equipment with them.

Looking for advice on an ATV, not a quad but a Kawasaki MULE or Polaris Ranger type.

Brand recommendations? Necessary equipment? Roof, heater, dump bed, winch, etc.?

What to buy and what to avoid?

VandelayIndustries · Aug 31, 2024

For a hard use hunting build. Short action.

Would like to check as many of the boxes as I can:

*Durable, something that’ll withstand hard use
*withstand some dust/dirty environments
*not titanium
*60 or 70* bolt lift I really dislike 90*
* as light as possible
*built jn recoil lug and pic rail
*prefits available
*rem700 footprint
*AW mags would be a nice touch

Spd37 · Sep 20, 2024

Looking for a 6.5 creedmoor barrel for an aero solus prefer a 20" but will consider others

Jmccracken1214 · Sep 21, 2024

Right hand with bolt release. I don’t remember if I ever used this. If I did, it doesn’t have but a handful of rounds on it.

$200 shipped

lanemorse_04 · Sep 16, 2024

Surgeon 1086 Prague built action. 20 inch straight fluted Bartlein 2B threaded 1/2x28 by Stewart rifles. Jewel trigger. Sitting in a McMillan Remington classic stock. Super light comes in at about 6lbs bare gun. Couple scratches on bolt knob.
Scope/can/bipod not included
Located in central Oklahoma will meet if possible.
2700$ shipped

Hunt2Eat.dk · Sep 21, 2024

Hello,

have anyone tried the Seekins precision AR safety selector kit for Ruger Precision Rifle 300WM?

When looking at Anarchy Outdoors webpage it's a "no", but looking at Seekins Precision webpage it's a "yes"

Have anyone tried this kit with a RPR 300WM?

In advance, thank you

Claus "Claude" S. Andersen

TheOE800 · Sep 21, 2024

What’s for sale?

Four 100ct boxes of new/virgin Alpha 6GT OCD brass cases from the same lot.

How much is it?

$125/box shipped or $455 for all four shipped. Zelle/Paypal FF/Venmo/USPS money orders/bank checks and wires/etc. I’m not terribly picky on how you pay.

SilentStalkr · Sep 20, 2024

Arizona Supreme Court rules 98K voters impacted by MVD error can vote full ballot

The Arizona Supreme Court has ruled that nearly 98,000 voters impacted by an “administrative error” involving the Arizona MVD and voter registration records can cast their full ballots for state and local elections in November.

www.azfamily.com

TheHebrewHammer · Jul 21, 2021

I am attempting to finish up my collection of all the FN-49 contracts. I am missing the Brazilian, Indonesian, Belgian (marked ABL), and finally the Congo contract. I will pay asking price if they are numbers matching and all original. I will also buy any FN-49 factory snipers if they are correct.

TheHebrewHammer · Sep 6, 2024

Like the title says, looking for the rare full auto BCG for the AR57 upper. I know they aren't cheap and I'm willing to pay market value.

LR-Enthusiast · Jul 5, 2024

High-end Optic Unload! Aimpoint TL2 & T1, Trijicon SRO & RMR, Holosun 510C, Leupold Gold Ring 12-40x60mm Mil-dot Spotting Scope

PP F&F, Zelle, or USPS MO only. Please email for pictures.

Aimpoint Micro T1 2 MOA no mount w/ Black Tango down cover, overall great shape, safe queen, a couple minor marks on side, glass is excellent, holes are all in great shape - $499 $479 $465 shipped & insured

2x Aimpoint Micro TL 4 MOA, these are a special B&T version of H1/T1 that don't have a NV mode, but that have the blacked out lettering, super cool and rare, no mount w/ bikini cover, overall great shape, safe queen, glass is excellent, holes are all in great shape - $449 $429 $415 $399 each shipped & insured

2x 1x Aimpoint OEM Micro T1/T2/H1/H2 Low Mount non-QD (new T2 take-off w/ screws) - ~~$49 $39~~ $29 shipped each

Trijicon SRO 5 MOA SR03-c-2500003, purchased from Big Tex May 2022, about 200-250 round through it on my Glock 17, excellent overall shape, torque wrench used mounted to an FCD plate (available in another ad in the handgun accessories section), also was behind a BROS protective mount with foam (BROS not included and available for an extra $50), in retail case with all normal accessories, amazing optic. - $459 shipped and insured

Jagerwerks BROS protective shroud for SRO (Great shape, Foam perfectly installed) - $49 shipped

Magpul MBUS Pro backup sights F&R set, as new takeoff - $149 $139 $129 shipped

2x Trijicon RMR 3.25 MOA Adjustable LED Type 2 RM06-C-700672, both purchased from Lanbo's March 2023, about 100-150 round through it on my Glock 19 & Glock 45, excellent overall shape, torque wrench used mounted to an FCD plate (available in another ad in the handgun accessories section), in retail case with all normal accessories, amazing optic. - $399 $389 $379 shipped and insured each

Holosun Elite HE-510C-GR Green Reticle Optic in great shape with about 500 rounds on it through my MPX, I also have an absolute cowitness ADM mount for and extra $49 includes retail box missing adjustment tool and manual - $275 $265 $249 shipped & insured

ADM QD Holosun 510C Absolute Cowitness Mount AD-510C-10-STD, great shape with screws and allen wrench - $49 $39 shipped

Leupold Gold Ring FFP 12-40x60mm Mil-dot reticle spotting scope, this is the same as the MK4 spotter with a different color ring on the front. Some signs of use and a mark on the eyepiece surround (not on the glass), glass is great overall, includes painted factory cover, scope was never painted - $999 $949 $899 $849 $799 $749 shipped & insured

Badger Ordnance M151 Spotting Scope Cover in Multicam for Leupold MK4 and Gold Ring 12-40x60mm (Great shape with previous owners name written in marker) - $49 $39 shipped

Vortex Precision Matched Rings, made by Seekins, 34mm, 1.00 inch high, PMR-34-100 (great shape, torque wrench installed) - ~~$125 $109 $99~~ $89 shipped for pair

Vortex Defender Scope Cap for 50mm objective (great shape) - ~~$19~~ $15 shipped

paraman1 · Jul 14, 2024

Just curious what everyone is using to pack their Garmin Xero C1’s in? I have a waterproof camera box but it is huge compared to the chrono and tripod. Anyone found something that fits it well and won’t take up half my range bag? Pictures or links to what you’re are using would be greatly appreciated.

Mozak · Sep 21, 2024

Full length top cover for Vision Accuracy Obsession chassis
Able to accept picatinny rail sections
Made in Norway from 7075 aluminum
Cerakote sage green
$125 shipped

Having trouble using the site?

Not receiving emails?

Posts

Posts

Filter

Accessories Themub.com M.U.B and wing mount

Attachments

Firearms LRB M25 in JAE Gen 3 with USGI TRW parts, built by Ted Brown

SOLD Tangent Theta 5-25 Gen2XR price drop

SOLD Razor 1-10 MRAD with Acro P2 Offset

Attachments

Rifle Scopes Burris XTR Pro 5.5-30x56 SCR 2 Illuminated Reticle

Maggie’s Is Frank a short hot dog?

Reloading Equipment Redding Type S Match Bushing 3 Die Neck Sizing Set and Titanium Bushings.

Attachments

Accessories K&P 32” 375 RUM barrel for TL3 SA w/ brass and dies

Rifle Scopes Schmidt & Bender PM 2 5-25x56 mm scope, which one do I have?

Maggie’s Farm ATVs

We bought a small (<50 acres) farm in MS, and are headed there soon. The former owners took their equipment with them.​

Looking for advice on an ATV, not a quad but a Kawasaki MULE or Polaris Ranger type.​

Brand recommendations? Necessary equipment? Roof, heater, dump bed, winch, etc.?​

Accessories ISO Aero Solud Prefit 6.5 Creedmoor

SOLD Trigger tech special 2 stage flat r700

Firearms Surgeon 1086 300 win mag 2700$

Attachments

SOLD Alpha 6GT Brass

What’s for sale?​

How much is it?​

WTB FN-49 Brazilian, Belgian, Indonesian, Congo

Firearms WTB AR57 FA BCG

Optics Badger Ordnance Spotting Scope Cover $39, Vortex Rings $89, Aimpoint Low Mount $29

Accessories AO/Vision Chassis Top Cover

Attachments

We bought a small (<50 acres) farm in MS, and are headed there soon. The former owners took their equipment with them.

Looking for advice on an ATV, not a quad but a Kawasaki MULE or Polaris Ranger type.

Brand recommendations? Necessary equipment? Roof, heater, dump bed, winch, etc.?

What’s for sale?

How much is it?