Like title states, looking for a schnieder M40 barrel 1:12 twist.

FS is a Maven RS 1.2 2.5-15x44 FFP mil scope with Warne Hyperlite scope rings. $1050 firm shipped.
Only trades would be towards a Seekins DMR 223 18” barrel or similar.
Thanks!

Looking for the 10" MCSR specifically, in M-LOK.

novagrade double gripper digiscope adapter with all colletes and a semi rigid case that I found works nicely. $100 +ship obo.

$850 shipped
PP f&f , MO or check would work best for me.

Right handed KMW Sentinel with the Integrated Mounting Block for a short action R700 footprint, KMW bottom metal, Henderson rail, the shorter picatinny rail, and a couple extra LOP spacers.

I bought this used and the previous owner had the IMB machined for trigger clearance. I used it with an ARC archimedes and it was fantastic. The overinsertion tabs on the bottom metal allowed me to cycle the bolt with the magazine resting on a bag.

Selling it because I had to switch to left handed rifles due to an eye injury.

ETA: there are a couple of chips in the molded in finish on the right side of the forend. See last image.

I weighed it with Henderson rail and bottom metal installed: 4.95lb

New Norma 6.5x284 Norma Brass is on sale for only $49.95 / 50 ct while supplies last


300 WSM Brass is back in stock (going fast)

Lots of MILSURP caliber new brass on sale as well:

7.7 Japanese
6.5 Japanese
7x57
8x57
6.5 MS

Dangerous Game Brass is on sale to include:
416 Rem Mag
505 Gibbs

Check it all out:

I thought about resurrecting the old thread, but it was getting pretty big. So lets get a new one going...

Post up pics of your bikes, rides, or what not. Also any mountain biking (or any cycling) related conversation is always welcome!

As title states:
Vector X 10x42 SMR + RRS mount.
All the original goodies included - battery (large battery died and haven’t replaced)

$2500 2300 shipped

HI folks, at a PRS match this last weekend there was about 5 shots out of 200 where I swear it felt like I shot a muzzleloader, and got a slightly delayed bang after hearing the trigger click. I cannot replicate it by dry firing at my bench back home.

I also recently worked up a new load for my 6 creed, the gun started speeding up and I backed off the load a bit, putting 37.8 gr of H4350 in with a berger 109 hybrid. The load shot really tight so I didn't think anything of it. But now I am wondering, should I be looking at the trigger, or could I possible have such low case fill that I got delayed shot/hang fire? I use CCI450 magnum SRP so afaik the primer needs just enough uumph to push the bullet out and start burning the powder, but while I feel confident at reloading I've never really gone down the case fill rabbit hole, and since this is a new load and the trigger only has ~1200 rounds on it, I am wondering if this could be the problem instead.

Silver lining, I flinched before the shot went off every time, so now I know I need to work on my follow through

Thanks all!

Selling a somewhat rare FDE Spuhr mount setup for 36mm scopes. The combo includes a 6002 mount (1.5" height, 0 moa cant) and A0029 diving board both in matching FDE. The shade of tan perfectly matches ZCO FDE scopes. Comes as shown.

SOLD

Not willing to separate the diving board at this time.

No trades please.

Noob here, with noob question: I've read I should set my shoulder bump to -.002" from fire brass length. Well, on checking my die setup, I'm at -.0015"...should I bother chasing that last-.0005"?

Running 26” Stuteville 1-7.5 twist barrel. Planning on Varget with CCI 450s. Looking for some starting loads for 107 SMKs and 105 Nosler RDFs. Any helps appreciated. I’ve tried searching but not seeing a lot on 6br loads so I figured I start a thread. Thanks for any help.

Used V3, case, accessories (rod, plastic/rubber spacers). $125 shipped. Can post pictures if you want. DM me, I will not dm you #fuckscammers.

What are your "go to" online stores for ammunition? best shipping and prices, obviously.

Selling a build that I put together a couple of months ago, with the intention of using it in a bunch of DMR matches, but I’ve found myself going back to my 223 and 6.5 more often than not, so figured I’d let the rifle go and put it towards something else. It shoots great, accurate, flat, and soft. I 100% prefer it over 6 ARC, and never have to worry about bolt issues.

Shoots 90gr scenars at 2815fps. Will provide load data to the buyer.

Build details are:
-BG defense Type A upper receiver with 17” SPR handguard with mlok arca rail. Upper receiver has been lapped, and trued, as well as the barrel bedded
-Type A TiNi BCG with Trybe enhanced bolt
-Radian gas buster charging handle
-Satern liberty 20” barrel chambered in 6 MAX, 7.5T 5R rifling. 5/8-24 threads with hellfire match muzzle brake. *Entire rifle has exactly 200 rounds through it*
-Rifle +1 gas system, w/Aero adjustable gas block
-Vltor A5 buffer tube w/H2 buffer and springco green spring
-Ballistic Advantage billet lower with enhanced takedown pins
-Rise armament trigger
-Ambi safety
-Ergo deluxe vertical grip
-B5 precision stock
-Vortex 20MOA cantilever precision mount with diving board mount
-Leupold Mark 4HD 4-18x52 with PR2 MIL reticle

Rifle includes:
-Lee die set
-186 pcs of 1x fired brass, has been annealed and wet tumbled
-10 round mag x2
-20 round mag x2

Asking $3000 for rifle, scope, and extras.
$2200 for rifle only, with dies, mags, and brass
*bipod not included*

$1100 for Leupold and Mount

For sale, about 425 rounds thru it. Done by Themal Suppressors 7.5 tw 26" shot 110 Atips and 109hybrids great, .5 and better. Just switched calibers and don't need barrel anymore
PPFF or Zelle
$450 shipped

Will these subsonic 255gr projectiles stabilize in 1-9.5 twist, 16" barrel out to say 200 yards?

Schmidt and Bender 3-20 Ultra Short with 1/2 cm-cw MT II MTC LT Turrets and MSR2 reticle. Scope with caps only - 3.1K shipped insured or 3K DFW area face to face. If you want the mount - NF ultralite 1.5" add 250.

Like new - love the scope, but going to an LVPO on this build as she's only 5.5lbs pre-optic.



Trades: March 4.5-28 or 5-42, Razor G3, Zeiss 6-36, K540i, ZCO 840, TT735, Theos, all in mils to upgrade a bolt gun - I already have the LVPO for this one - thanks.

looking to buy a zco 527 Mpct2x 15 mil NLE.

For sale is a MK Machining Anti-Cant Aluminum Bubble Level for 34mm scope tubes. It is in like new condition with no damage. $50 shipped to you. I accept Paypal (G&S or F&F), Zelle or personal check (allowing enough time for check to clear.

Have too many backpacks and trying to consolidate. American made tad lightspeed, comes with the additional control panel on the inside and has a removable beavertail on the front. $old TYD firm

Black Foundation Samson Bighorn TL3 inlet WITH Hawkins bottom metal C1 grip Brass weights New in the box sold shipped

The Vudu 3-9x scope is in the house !


Let me know what you want to see, we'll go live to include at the Range (weather permitting)

Super excited to run this little guy !

Vortex Razor LH 3-15x42, HSR-4 reticle. Great lightweight hunting scopes with a side focus. This one is in excellent condition. $525 shipped. Would trade on a good condition Razor LH 1.5-8 model.

REDDING RELOADING TYPE S ELITE DIE SET 6.5 GRENDEL $250
REDDING TYPE S ELITE BUSHING DIE SET, 223 REMINGTON $200