T3x viel alpine, mcmillan A5a stock, and lighter trigger spring, and scope rail is all that has been done to it. was my brother's wife's hunting rifle, didn't draw tags this year so he decided to sell this and build a 7saum, I never shot it, I'll see if he has target pics. Would like 2250 shipped,

MPA Long Action Hybrid chassis. (Raw aluminum) Includes action screws.

$700 PayPal f&f shipped to lower 48 with USPS insured priority mail

Brand new black MDT rubber dampeners in unopened box. SRS-X Elite Buttstock Damper Set.

SOLD

Have two cases (400rds), same lot #, Hornady 105 Black 6mm arc ammo.

Asking $500, obo shipped.

I recently purchased a 6.5x47 Lapua and took it out Friday to test a few loads. This was brand new Lapua brass, 140 GR Berger Hybrids, CCI 450 primers and H4350. All shots were at a 100 yards. I did fail to record velocity on 3 shots so I didn't include the ES or SD on that group. I didn’t have any pressure signs on the brass so I am tempted to go a little higher just to see if there is a node around 2800 FPS.

The rifle is a Defiance action with a Brux 26 inch barrel bedded into a McMillan A6 stock.

Last but not least, from group 5 on I was able to put 3 shots touching or in the same hole and then I would start to struggle and the next 2 would leak out. I am not sure if it was because I was just so excited to be shooting my new rifle finally or because I was on a time crunch due to my Dad needing to get back home to do his irrigation.

Have a Left hand Gap rifle that I could never get used to! I am left hand shooter that grew up with right hand guns. Motor skills are for right hand bolts. Thought I would go all out and get a custom left hand bolt rifle built. Has sat in safe for years. Has exactly 60 rounds of factory Hornady eld match through it. Built on the gap Templar VII action. McMillan stock bedded by gap with fully adjustable rear butt. Trigger tech diamond flat shoe. Area 419 arca rail. 2700 shipped. Bipod not included

Selling in 100 packs.

400 left.

$40 per 100 to your door.

I can't talk about this elsewhere. Have an employee. Not doing well. I'm trying to throw him a lifeline so he can get to retirement. Give him his review, its not great, but its not bad ("I need you to change some behaviors") no PIP or coaching or anything like that.

Dude flips his lid on me. No offense but trying to stay cool and calm was not his strong point.
Tells me the conditions for him not to retire in a month. I'm a little--That's a bold strategy Cotton... (Inside I'm like Well, Bye!)

Now I know I am a mega-flame asshole in here (because I can be), but I apologize for using words like "crap" at work. I'm actually "Mister Nice" (STOP LAUGHING YOU JACKHOLES ITS TRUE!)

Who the hell after a bad review makes demands to stay employed? You guys wonder why I think people are dense as hell. I'm the person trying to help him, everyone else is scared of him..he literally bullied a professor into re-writting his review. So I knew the project he wanted, he was going to get (one of his demands) so to at least make him happy I told him he had be assigned, but I couldn't do the other 2 conditions. It was above my paygrade (Its a copout, more on that in a sec).

Dude then lectures me on how its my job to negotiate with the appropriate pay grade to get what he wants. (I'll take how to get Doc to can your ass on the spot for $1000 alex)

Actually it wasn't much of a negotiation: Convo went like this
"Hey Boss, X wants this or he retires"
"Do you care"
"Nope"
"Good let him retire, he's always pissed off anyway"

As the kids say:
I just can't even....

Aluminum non panning model.
Love this bipod, especially for heavy rifles.
I sold my Mrad and won’t have another big rifle for a few years so this is on the block.

These are a direct fit for the Aero M4 Enhanced upper receivers. They do not come with barrel nuts. Black in color

I have a 17.5" and 15.5" available.

Brand new. $220 for the 17.5" and $210 for the 15.5". In stock and ready to ship. Free shipping and no sales tax.

I have a set of Badger M40a3 rings for sale. These are 30mm, 1.031” height steel rings. USMC marked. Will sell the for 175.00 shipped.

Venmo or USPS money order only.

Please pm me with any questions.

Thanks

New member currently living in Hawaii. Working to build out my new 7 PRC for use out here and back on the mainland once I move back next year. Hoping to learn some interesting things on this forum. If anyone has questions about where/how to rifle hunt in Hawaii feel free to contact me!

As the title states, I’m looking for a Geissele 45 degree SMR QD swivel mount

So I've been building my hunting and precision ARs for a long time, but have never messed around with rimfire outside of a 10/22. I want to put together a high end 22LR AR trainer/varminter for use with a sparrow suppressor, with the priority being precision.

I really don't know enough to even start gathering the goods. Does everything go together like a typical ar15 if I want to use a typical ar15 upper and lower? Is the only difference the 22LR bolt adapter and magazines? Is the gas block ultimately the same? I assume there is no buffer system and the buffer tube is there only to support the stock.

In terms of components: What is a the most accurate high-end barrel/adapter combo? If I do a certain combo, am I limited to certain mags? I want to go 16", but am open to being called stupid for that decision. I have a decent amount of quality AR parts to use, so I'd rather not buy a complete upper when I can roll one up myself, but you may also advise against that since I am a rimfire novice.

Thanks in advance

Both pickers advance. Seven more teams lose their first game, so the pool is down to 12,
It's starting to get very interesting!

Post your Week 7 picks in this thread. Good luck!

This is staggering environmental stupidity

For Sale Thunder Beast Arms 50% off Certificate - $OLD

Can mail hard copy or send picture of certificate with code.

Looking for 6mm br brass lapua. Must be virgin. Thank you.

Selling an early manufacture Nightforce NXS 3.5-15x50. In line with early military issue, mil-spec NXS's of the same model, this scope features an illuminated Second Focal Plane Mil-Dot reticle paired with 10 MOA turrets. I had the bottom of the housing engraved in the exact location, size and type as other, actual Mil-Spec marked units that feature the exact same specs as this scope (mil-dot reticle, 10 moa turrets, etc). If I didn't disclose this was not an actual Mil-Spec marked scope, you'd never know (other than a s/n lookup). Ball on a budget, cure your clone-autism and snag this "mil-spec" Nightforce at a fraction of the cost of an actual one. The scope is in fantastic condition and comes as shown.

SOLD

No trades please.

Howdy!

Hoping to find a shorter length impact 737 prefit in 6.5 prc. Anything between 18-22” is game for me.

Also looking for an impact mag bolt if you got it.

Selling my Magnetospeed v3

Brand new, never used/never turned on, just took plastic off case and opened.

Recently bought from hide member, but I received a Garmin just after.

Includes full setup in original hard case (pictured). —$190 shipped

No trades

PP F&F or Zelle preferred

Guys,

I got one of these on order. I'm wanting to shoot it with a suppressor, anyone know what size of adjustable gas block I will need? If anyone has one laying around and wants to sell it, let me know!

Asking for 500 bucks. Thanks

I was trying some new handloads out the other day and out of around 25 rounds fired, I had these two duds that happened. Both rounds were rechambered after the initial misfire and I attempted to fire them again with no luck. All of the rounds fired would have been loaded in the same session and used Federal GM210M. I haven't had this issue with any other rounds fired in this rifle so where would I start looking to pin down the "why" of where my issue lies?

I have 2 DNT 7-35 scopes in MIL that I’ve decided not to use. They are both MIL and new in the box.

Asking $520 shipped each.