Posts
October 2024 Topstraps Rimfire Challenge Timed Match Notice
- By Topstrap
- All Things Rimfire
- 0 Replies
Well, Fall is finally here and this will be the last Topstraps Rimfire Challenge matche of the year. This is the match I wait for all year, it's by far the most fun to run and watch everyone compete in. Some competitors get a bit intimidated by it since there is a time limit but quite a few of us have shot Single shots and easily finished. This is a Unique Rimfire Match that combines accuracy, precision, smoothness of reloading your magazine and making the changes needed to hit targets at varying distances from 25 yards to 197 yards with a timer counting down.
A shooter may re-enter but will have to get back in line to shoot the second time. As always, no Benchrest type equipment meaning no benchrest style front or rear rests. Bipods/Bags on front and bags or a monopod on the rear. I do allow adjustable bipods such as a Rempel for the front. The competitor when reloading their magazine has to hold it in their hands and not have it contacting anything to help feed rounds into it, if a competitor has trouble loading their magazine they can hand it off to someone else who can reload it and hald it back due to physical difficulties. NO devices to help load a magazine can be used. Any rifle and scope can be used and there will still be the 3 classes of ammo so there will still be a free entry for a future match given to the winner of each class. Just so you know every year the winner of this match has used a "B" class ammo.
For the timed match competitors can use any 22 longrifle rifle/pistol including a Single shot, Semi-auto, Toggle, Pump, Lever Gun or Falling Block but will be limited to one (1) 10 round max magazine of no more than 10 rounds at any one time in the gun. There will be 75 targets to hit from 25 yards out thru 197 yards and you will be given 20 minutes to do the best you can. You will not be shooting the smaller targets on some of my racks, targets will be some of my larger ones to keep things moving and not have a shooter get hung up on a really small hard to hit target. Some stages will have their own rack for the timed event but will be easily identifiable.
Shooters for the timed event will dump 100 rounds in a bowl (has to be in the bowl and witnessed), at the buzzer they can load their magazine or start shooting if using a single shot. Starting at 25 yards and always shooting left to right you work your way out thru the racks. I will only call out a miss and not an impact. I'm not spotting for any misses or hits on targets other than for score, up to you to see your own shots unless you get totally lost and I'll help you back onto a target. If I don't say anything keep shooting. I will give each shooter a paper with all rack numbers and distances on it so your data can be entered before it's your turn to start. I will tell you that you can progress to the next distance but it is up to the shooter to keep track of which rack/distance and target they are shooting. If you get lost/confused I may help with rack number but not every one. Up to the shooter to keep track of where they are.
A competitor can take sighters on a larger square plate at any distance and time they feel it's beneficial but those shots come out of their 100 rounds. The final score is calculated based on targets hit, rounds left over (if any) and also the time used to complete the match. So, you need to be accurate but shoot quickly to get as many hits as possible to get a good time or even finish the course. When the 20 minutes are done so are you, all part of the challenge.
The first time I ran this match an old Win 52-C with a 5 round magazine won with two Single Shot shooters coming in a close 2nd and 3rd. We came up with a calculation that when we tried every variable possible it always worked out the most accurate shooter with the most hits, most rounds left over and lowest time won. Was a lot of fun and a lot of different strategies that shooters tried to place higher up, some worked and some didn't but it made for letting the spectactors being entertained. I will only run one competitor at a time but it'll go faster than a regular match and gives for good entertainment while watching the others shoot knowing the timer is on them.
I still have the scores from the last time I ran this match. There a $100 bounty on the head of the current Kings Record score from a couple years ago. Maybe this will entice those speedy, deady accurate PRS/NRL competitors to come show off their talent and dethrone the current King. The top score was witnessed by at least two other competitors with one being Derrick Warren, no one practiced on the range before the timed match or knew exactly what the targets were except me. This match will have the exact same racks as the previous Timed Match to keep everything fair to qualify for the Bounty. Winning the match doesn't win the $100 bounty but setting a new all time Record Score will.
It will be Friday (11th), Saturday (12th) and Sunday (13th) of October. Starting around 8:00 or maybe a tad earlier if it's light enough. I know there are a lot of other shoots that weekend but the weather looks good so far and hope to see a few of you show up to try it out.
Address for GPS is 43985 S. 70 Rd, Belmont, OH It's right off I-70 about 30 miles East of Cambridge or 15 West of Wheeling.
Calculation used for score.
Targets Hit __________
+ Rounds Left _________
- Targets Left _________
= Total Points _________
Time Used (Minutes ) ______ X 60 = __________
+ Seconds __________
Total Time __________
Total Points ________ divided by Total Time __________ = Score __________
Topstrap
A shooter may re-enter but will have to get back in line to shoot the second time. As always, no Benchrest type equipment meaning no benchrest style front or rear rests. Bipods/Bags on front and bags or a monopod on the rear. I do allow adjustable bipods such as a Rempel for the front. The competitor when reloading their magazine has to hold it in their hands and not have it contacting anything to help feed rounds into it, if a competitor has trouble loading their magazine they can hand it off to someone else who can reload it and hald it back due to physical difficulties. NO devices to help load a magazine can be used. Any rifle and scope can be used and there will still be the 3 classes of ammo so there will still be a free entry for a future match given to the winner of each class. Just so you know every year the winner of this match has used a "B" class ammo.
For the timed match competitors can use any 22 longrifle rifle/pistol including a Single shot, Semi-auto, Toggle, Pump, Lever Gun or Falling Block but will be limited to one (1) 10 round max magazine of no more than 10 rounds at any one time in the gun. There will be 75 targets to hit from 25 yards out thru 197 yards and you will be given 20 minutes to do the best you can. You will not be shooting the smaller targets on some of my racks, targets will be some of my larger ones to keep things moving and not have a shooter get hung up on a really small hard to hit target. Some stages will have their own rack for the timed event but will be easily identifiable.
Shooters for the timed event will dump 100 rounds in a bowl (has to be in the bowl and witnessed), at the buzzer they can load their magazine or start shooting if using a single shot. Starting at 25 yards and always shooting left to right you work your way out thru the racks. I will only call out a miss and not an impact. I'm not spotting for any misses or hits on targets other than for score, up to you to see your own shots unless you get totally lost and I'll help you back onto a target. If I don't say anything keep shooting. I will give each shooter a paper with all rack numbers and distances on it so your data can be entered before it's your turn to start. I will tell you that you can progress to the next distance but it is up to the shooter to keep track of which rack/distance and target they are shooting. If you get lost/confused I may help with rack number but not every one. Up to the shooter to keep track of where they are.
A competitor can take sighters on a larger square plate at any distance and time they feel it's beneficial but those shots come out of their 100 rounds. The final score is calculated based on targets hit, rounds left over (if any) and also the time used to complete the match. So, you need to be accurate but shoot quickly to get as many hits as possible to get a good time or even finish the course. When the 20 minutes are done so are you, all part of the challenge.
The first time I ran this match an old Win 52-C with a 5 round magazine won with two Single Shot shooters coming in a close 2nd and 3rd. We came up with a calculation that when we tried every variable possible it always worked out the most accurate shooter with the most hits, most rounds left over and lowest time won. Was a lot of fun and a lot of different strategies that shooters tried to place higher up, some worked and some didn't but it made for letting the spectactors being entertained. I will only run one competitor at a time but it'll go faster than a regular match and gives for good entertainment while watching the others shoot knowing the timer is on them.
I still have the scores from the last time I ran this match. There a $100 bounty on the head of the current Kings Record score from a couple years ago. Maybe this will entice those speedy, deady accurate PRS/NRL competitors to come show off their talent and dethrone the current King. The top score was witnessed by at least two other competitors with one being Derrick Warren, no one practiced on the range before the timed match or knew exactly what the targets were except me. This match will have the exact same racks as the previous Timed Match to keep everything fair to qualify for the Bounty. Winning the match doesn't win the $100 bounty but setting a new all time Record Score will.
It will be Friday (11th), Saturday (12th) and Sunday (13th) of October. Starting around 8:00 or maybe a tad earlier if it's light enough. I know there are a lot of other shoots that weekend but the weather looks good so far and hope to see a few of you show up to try it out.
Address for GPS is 43985 S. 70 Rd, Belmont, OH It's right off I-70 about 30 miles East of Cambridge or 15 West of Wheeling.
Calculation used for score.
Targets Hit __________
+ Rounds Left _________
- Targets Left _________
= Total Points _________
Time Used (Minutes ) ______ X 60 = __________
+ Seconds __________
Total Time __________
Total Points ________ divided by Total Time __________ = Score __________
Topstrap
SOLD Leupold 1” Remington 700 SA base/rings
- By Woolsocks
- Buy - Sell - Trade
- 3 Replies
Title says it all. This came off a .243 mountain rifle. Also have the Nikon buckmaster scope that was on it if someone wants a package deal.
$40 shipped OBO
$40 shipped OBO
SOLD Winchester Power Point 6.5 Creedmoor ammo 129gr
- By WittyWook
- Buy - Sell - Trade
- 0 Replies
Attachments
SOLD Grind Hard Ammo 6.5 Creedmoor 131gr Controlled Chaos
- By WittyWook
- Buy - Sell - Trade
- 0 Replies
Attachments
6.5x55
- Reloading Depot
- 66 Replies
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
6.5x55 loads
11/03/2014
(2 votes)
Not one started so figured I would.
Berger 140g Hybrids
51.2g H4831SC
26" 8.5tw Bartlein M24/40
COAL 3.218"
2990fps +/- depending on lot of powder.
Caution, this will not fit a standard 6.5x55 chamber. COAL is too long. You'll need a lot of throat. Barrel started to go after 2400 rounds. Ending COAL after chasing the lands before the barrel burned out was 3.232.
L
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
11/03/2014
Glad you made it over from the old site. Not sure most of the other 6.5x55 fans did
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
11/03/2014 Last edited 11/04/2014 by LaytonH
(1 vote)
I got 6 firings before the brass started dropping primers. It's a hot load for sure. I also anneal every other firing.
L
Rate now:
TeaRexXGunny Sergeant
Rating: 3.0/5 this site
805 posts this site
Re: 6.5x55 loads
12/11/2014
I'm running 50.6 gr of H4831 sc under 140 hybrids at 2860fps out of a 24"bartlein.
Im on my 7th firing of the brass with no issues yet. Hoping to get one or two more before the brass goes and ~3000 out of the barrel.
Layton, I'm jealous of 2990!! You must be adding some secret sauce.
Rate now:
Daniel1381XCorporal
Rating: 3.2/5 this site
81 posts this site
Re: 6.5x55 loads
12/12/2014
Im running 48.5 H4831SC With 140 amax.. very accurate out of my 16.25 in setup
Rate now:
battlestickXSergeant
Rating: 3.0/5 this site
180 posts this site
Re: 6.5x55 loads
12/18/2014
How is your muzzle flash? That's a lot of slower burning powder for a short barrel.
I have a 22" Bartlein that will shot both 123 and 140 AMAX's with 48.1 gr of 4831SC. The barrel harmonics are just right with that amount of powder.
Rate now:
Daniel1381XCorporal
Rating: 3.2/5 this site
81 posts this site
Re: 6.5x55 loads
12/19/2014
Shooting saturday will take a look at the flash. Getting my magneto in and will test it out
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
01/20/2015
Does anyone have a good load for the 123 amax?
Rate now:
hillwatcherXSergeant
Rating: 3.2/5 this site
462 posts this site
Re: 6.5x55 loads
03/16/2015
I had a good 123 Amax load with a former 6.5x55 I had. It was a CZ 550 Full Stock.
Keep in mind, the barrel was 20.5", which certainly hurt the velocity and the "throat" wasn't too long.
My load was:
Lapua Brass
CCI 200
123 Amax
COAL in my rifle was 2.530" to ogive - measured with Hornady L-N-L (.010" jump)
46.5 grains H4350
Avg MV = 2768 fps
I worked up to 48.0 grains averaging 2850 fps, but the accuracy node was lower and it was showing some slight pressure signs that high. You ought to be able to go way faster than that with a custom tube and a properly set up throat/chamber.
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
03/16/2015
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
08/23/2015
6.5x55 Ackley Improved
Berger 140g Hybrids
52.5g RL26
28" 8tw Bartlein M24/40
COAL 3.124
3104 fps
Rate now:
nfoleyXFirst Sergeant
Rating: 3.2/5 this site
1073 posts this site
Re: 6.5x55 loads
09/10/2015
Here is what I settled on with my swede. Mark Chanlynn 24" bbl, bighorn action
50.6g H4831sc
140 berger vld
Coal 3.160"
velocity is right around 2880, and I am seeing no pressure signs with the Chanlynn rifle.
Rate now:
yej0001XGunny Sergeant
Rating: 3.1/5 this site
723 posts this site
Re: 6.5x55 loads
10/23/2015 Last edited 10/23/2015 by yej0001
Tikka T3 Sporter with 24 inch barrel; Norma brass
All loads are 0.5 MOA or less
(1) 142 SMK (#1742)
47.6 gr H4831SC
Fed 210 GM primer
CBTO 2.550 (10/1000th jump)
-Mild load; ~2725 fps; very accurate
(2) 130 Norma Golden Target
49.3 gr H4831SC
Fed 210 GM primer
CBTO 2.510 (50/1000th jump)
~2840 fps
-Norma 130 GT likes longer jump in my barrel
(2) 142 SMK (#1742)
48.3 Reloader 22
Fed 210 GM primer
CBTO 2.550 (10/1000th jump)
~2840 fps
-This is a hot load; the bolt starts to stiffen up at 48.5 RL22 in my rifle. WORK UP THE LOAD SLOWLY IN YOUR OWN RIFLE!
Rate now:
dTros
XFirst Sergeant
Rating: 3.3/5 this site
1379 posts this site
Re: 6.5x55 loads
01/05/2016
KElblys - 6.5x55 GWI
just now fire forming so that load is essentially a std 6.5x55
24" Brux Barrel
46.5 IMR 4350
Wolf Mag Primers
COL 2.92
130 Berger Hybrid
2810 fps
Mild flattening of primer
Honestly a little surprised at the slow speed. I think I will try 2.94 OAL and bump up to 47 gr see what happens.
Was hoping for 3k but barrel could be a little slow. Will be happy with 2900. Not sure half grain can get me 100 fps tho. Maybe 50.
Regards,
DT
Rate now:
dTros
XFirst Sergeant
Rating: 3.3/5 this site
1379 posts this site
Re: 6.5x55 loads
01/20/2016 Last edited 02/02/2016 by dTros
(1 vote)
Just shot the Vegas Precision Rifle Challenge while fire-forming brass. Rifle shot amazing almost pulled out a top 10.
Velocity sped up to 2925 once barrel was broke in, more where I expected it to be.
Cant wait to work up a load for the GW Improved. Will keep updated. Hoping for 3100fps
DT
ETA:
Forgot to mention that when I chrono first time it was -10 at a match in the mtns so that might have skewed data some
yes it sucks working up a load in the winter but you do what you have to lol.
DT
Rate now:
PanzerFartXCorporal
Rating: 3.1/5 this site
71 posts this site
Re: 6.5x55 loads
04/28/2016 Last edited 04/28/2016 by PanzerFart
My 123 amax load (rifle: 26" bartlein m24countour on rem700 from the LRI group buy)Absolute lazer groups with this loads, dont have a chrono but 10 shot groups are silly!silly!
lapua brass
win primer
37.3 grains Varget
3.000
Rate now:
ammopig
XCorporal
Rating: 3.0/5 this site
54 posts this site
Re: 6.5x55 loads
05/24/2016
Anyone shooting a 6.5X55 improved?
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
05/25/2016
A couple of us are. What you looking for?
Rate now:
ammopig
XCorporal
Rating: 3.0/5 this site
54 posts this site
Re: 6.5x55 loads
05/25/2016
I'm putting together a 6.5X55 improved throated for 140 Berger hybrids. Wondering what loads to start with, and where you are seeing pressures? What powders are working?
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
05/26/2016
I shoot 140 hybrids in mine. I'm using 52.5g of RL26 at 3100fps. Didn't see pressure till 54g.
Rate now:
FriscoStarXPrivate
Rating: 0.0/5 this site
1 posts this site
Re: 6.5x55 loads
10/11/2016
Great thread , I'm just starting to reload for my Sako Bavarian Carbine. I'll be watching here for some ideas
What powder would be best for the 20" barrel. I pretty much have all powders for this caliber. Kinda saving my H4350 for my Creedmoor though...
Rate now:
65x55guyXPrivate
Rating: 0.0/5 this site
36 posts this site
Re: 6.5x55 loads
10/30/2016
This isn't really the spot for it, but I figured someone who has posted here might have a pair of go/no go gauges for 6.5 x 55 I could borrow. Have a savage action build with a Shilen barrel that's completed and shoots well for the most part, but gets pressure signs earlier and with less powder than anticipated.
It was built and head spaced with a more knowledgeable friend and we used a factory Lapua round for the go and added a piece of electric tape for no go. I would like to borrow a set of gauges if available and check out spacing to see if that's possibly the issue.
I will gladly pay shipping for anyone that can help me out.
Thanks
JTG
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
6.5x55 loads
11/03/2014
(2 votes)
Not one started so figured I would.
Berger 140g Hybrids
51.2g H4831SC
26" 8.5tw Bartlein M24/40
COAL 3.218"
2990fps +/- depending on lot of powder.
Caution, this will not fit a standard 6.5x55 chamber. COAL is too long. You'll need a lot of throat. Barrel started to go after 2400 rounds. Ending COAL after chasing the lands before the barrel burned out was 3.232.
L
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
11/03/2014
LaytonH wrote: Not one started so figured I would.
Berger 140g Hybrids
51.2g H4831SC
26" 8.5tw Bartlein M24/40
COAL 3.218"
2990fps +/- depending on lot of powder.
Caution, this will not fit a standard 6.5x55 chamber. COAL is too long. You'll need a lot of throat. Barrel started to go after 2400 rounds. Ending COAL after chasing the lands before the barrel burned out was 3.232.
L
Just out of curiosity, how many firings were you getting on your cases before they wore out??Berger 140g Hybrids
51.2g H4831SC
26" 8.5tw Bartlein M24/40
COAL 3.218"
2990fps +/- depending on lot of powder.
Caution, this will not fit a standard 6.5x55 chamber. COAL is too long. You'll need a lot of throat. Barrel started to go after 2400 rounds. Ending COAL after chasing the lands before the barrel burned out was 3.232.
L
Glad you made it over from the old site. Not sure most of the other 6.5x55 fans did
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
11/03/2014 Last edited 11/04/2014 by LaytonH
(1 vote)
I got 6 firings before the brass started dropping primers. It's a hot load for sure. I also anneal every other firing.
L
Rate now:
TeaRexXGunny Sergeant
Rating: 3.0/5 this site
805 posts this site
Re: 6.5x55 loads
12/11/2014
I'm running 50.6 gr of H4831 sc under 140 hybrids at 2860fps out of a 24"bartlein.
Im on my 7th firing of the brass with no issues yet. Hoping to get one or two more before the brass goes and ~3000 out of the barrel.
Layton, I'm jealous of 2990!! You must be adding some secret sauce.
Rate now:
Daniel1381XCorporal
Rating: 3.2/5 this site
81 posts this site
Re: 6.5x55 loads
12/12/2014
Im running 48.5 H4831SC With 140 amax.. very accurate out of my 16.25 in setup
Rate now:
battlestickXSergeant
Rating: 3.0/5 this site
180 posts this site
Re: 6.5x55 loads
12/18/2014
How is your muzzle flash? That's a lot of slower burning powder for a short barrel.
I have a 22" Bartlein that will shot both 123 and 140 AMAX's with 48.1 gr of 4831SC. The barrel harmonics are just right with that amount of powder.
Rate now:
Daniel1381XCorporal
Rating: 3.2/5 this site
81 posts this site
Re: 6.5x55 loads
12/19/2014
Shooting saturday will take a look at the flash. Getting my magneto in and will test it out
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
01/20/2015
Does anyone have a good load for the 123 amax?
Rate now:
hillwatcherXSergeant
Rating: 3.2/5 this site
462 posts this site
Re: 6.5x55 loads
03/16/2015
I had a good 123 Amax load with a former 6.5x55 I had. It was a CZ 550 Full Stock.
Keep in mind, the barrel was 20.5", which certainly hurt the velocity and the "throat" wasn't too long.
My load was:
Lapua Brass
CCI 200
123 Amax
COAL in my rifle was 2.530" to ogive - measured with Hornady L-N-L (.010" jump)
46.5 grains H4350
Avg MV = 2768 fps
I worked up to 48.0 grains averaging 2850 fps, but the accuracy node was lower and it was showing some slight pressure signs that high. You ought to be able to go way faster than that with a custom tube and a properly set up throat/chamber.
Rate now:
RustybroadheadXGunny Sergeant
Rating: 3.2/5 this site
685 posts this site
Re: 6.5x55 loads
03/16/2015
hillwatcher wrote:
I had a good 123 Amax load with a former 6.5x55 I had. It was a CZ 550 Full Stock.
Keep in mind, the barrel was 20.5", which certainly hurt the velocity and the "throat" wasn't too long.
My load was:
Lapua Brass
CCI 200
123 Amax
COAL in my rifle was 2.530" to ogive - measured with Hornady L-N-L (.010" jump)
46.5 grains H4350
Avg MV = 2768 fps
I worked up to 48.0 grains averaging 2850 fps, but the accuracy node was lower and it was showing some slight pressure signs that high. You ought to be able to go way faster than that with a custom tube and a properly set up throat/chamber.
Thanks for the info. I am trying to come up with a load for a factory Win 70 featherweight in 6.5x55 so I am dealing with only a 22" tube. I tried H4350 to start with and didn't have much luck but that was with some different bullets. I will give this a try and see how it goes. Thanks for the info!I had a good 123 Amax load with a former 6.5x55 I had. It was a CZ 550 Full Stock.
Keep in mind, the barrel was 20.5", which certainly hurt the velocity and the "throat" wasn't too long.
My load was:
Lapua Brass
CCI 200
123 Amax
COAL in my rifle was 2.530" to ogive - measured with Hornady L-N-L (.010" jump)
46.5 grains H4350
Avg MV = 2768 fps
I worked up to 48.0 grains averaging 2850 fps, but the accuracy node was lower and it was showing some slight pressure signs that high. You ought to be able to go way faster than that with a custom tube and a properly set up throat/chamber.
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
08/23/2015
6.5x55 Ackley Improved
Berger 140g Hybrids
52.5g RL26
28" 8tw Bartlein M24/40
COAL 3.124
3104 fps
| Series | 1 | Shots: | 5 |
| Min | 3100 | Max | 3108 |
| Avg | 3104 | S-D | 3.4 |
| ES | 8 | ||
| Series | Shot | Speed | |
| 1 | 1 | 3103 | ft/s |
| 1 | 2 | 3100 | ft/s |
| 1 | 3 | 3108 | ft/s |
| 1 | 4 | 3108 | ft/s |
| 1 | 5 | 3104 | ft/s |
Rate now:
nfoleyXFirst Sergeant
Rating: 3.2/5 this site
1073 posts this site
Re: 6.5x55 loads
09/10/2015
Here is what I settled on with my swede. Mark Chanlynn 24" bbl, bighorn action
50.6g H4831sc
140 berger vld
Coal 3.160"
velocity is right around 2880, and I am seeing no pressure signs with the Chanlynn rifle.
Rate now:
yej0001XGunny Sergeant
Rating: 3.1/5 this site
723 posts this site
Re: 6.5x55 loads
10/23/2015 Last edited 10/23/2015 by yej0001
Tikka T3 Sporter with 24 inch barrel; Norma brass
All loads are 0.5 MOA or less
(1) 142 SMK (#1742)
47.6 gr H4831SC
Fed 210 GM primer
CBTO 2.550 (10/1000th jump)
-Mild load; ~2725 fps; very accurate
(2) 130 Norma Golden Target
49.3 gr H4831SC
Fed 210 GM primer
CBTO 2.510 (50/1000th jump)
~2840 fps
-Norma 130 GT likes longer jump in my barrel
(2) 142 SMK (#1742)
48.3 Reloader 22
Fed 210 GM primer
CBTO 2.550 (10/1000th jump)
~2840 fps
-This is a hot load; the bolt starts to stiffen up at 48.5 RL22 in my rifle. WORK UP THE LOAD SLOWLY IN YOUR OWN RIFLE!
Rate now:
dTros
XFirst Sergeant
Rating: 3.3/5 this site
1379 posts this site
Re: 6.5x55 loads
01/05/2016
KElblys - 6.5x55 GWI
just now fire forming so that load is essentially a std 6.5x55
24" Brux Barrel
46.5 IMR 4350
Wolf Mag Primers
COL 2.92
130 Berger Hybrid
2810 fps
Mild flattening of primer
Honestly a little surprised at the slow speed. I think I will try 2.94 OAL and bump up to 47 gr see what happens.
Was hoping for 3k but barrel could be a little slow. Will be happy with 2900. Not sure half grain can get me 100 fps tho. Maybe 50.
Regards,
DT
Rate now:
dTros
XFirst Sergeant
Rating: 3.3/5 this site
1379 posts this site
Re: 6.5x55 loads
01/20/2016 Last edited 02/02/2016 by dTros
(1 vote)
dTros wrote:
KElblys - 6.5x55 GWI
just now fire forming so that load is essentially a std 6.5x55
...
2810 fps
...
Regards,
DT
KElblys - 6.5x55 GWI
just now fire forming so that load is essentially a std 6.5x55
...
2810 fps
...
Regards,
DT
Just shot the Vegas Precision Rifle Challenge while fire-forming brass. Rifle shot amazing almost pulled out a top 10.
Velocity sped up to 2925 once barrel was broke in, more where I expected it to be.
Cant wait to work up a load for the GW Improved. Will keep updated. Hoping for 3100fps
DT
ETA:
Forgot to mention that when I chrono first time it was -10 at a match in the mtns so that might have skewed data some
yes it sucks working up a load in the winter but you do what you have to lol.
DT
Rate now:
PanzerFartXCorporal
Rating: 3.1/5 this site
71 posts this site
Re: 6.5x55 loads
04/28/2016 Last edited 04/28/2016 by PanzerFart
Rustybroadhead wrote: Does anyone have a good load for the 123 amax?
Hey guys, Just got back on the hide I remember we had a great 6.5x55 thread going around the start of the group buy few years back. My name was Panzer but somone stole it so not Im panzerfart....Anys great to see the 6.5 thread back up. Im just getting used to the change from the old hide as I havnt been on in a while.My 123 amax load (rifle: 26" bartlein m24countour on rem700 from the LRI group buy)Absolute lazer groups with this loads, dont have a chrono but 10 shot groups are silly!silly!
lapua brass
win primer
37.3 grains Varget
3.000
Rate now:
ammopig
XCorporal
Rating: 3.0/5 this site
54 posts this site
Re: 6.5x55 loads
05/24/2016
Anyone shooting a 6.5X55 improved?
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
05/25/2016
A couple of us are. What you looking for?
Rate now:
ammopig
XCorporal
Rating: 3.0/5 this site
54 posts this site
Re: 6.5x55 loads
05/25/2016
I'm putting together a 6.5X55 improved throated for 140 Berger hybrids. Wondering what loads to start with, and where you are seeing pressures? What powders are working?
Rate now:
LaytonH
XFirst Sergeant
Rating: 3.2/5 this site
1862 posts this site
Re: 6.5x55 loads
05/26/2016
I shoot 140 hybrids in mine. I'm using 52.5g of RL26 at 3100fps. Didn't see pressure till 54g.
Rate now:
FriscoStarXPrivate
Rating: 0.0/5 this site
1 posts this site
Re: 6.5x55 loads
10/11/2016
Great thread , I'm just starting to reload for my Sako Bavarian Carbine. I'll be watching here for some ideas
What powder would be best for the 20" barrel. I pretty much have all powders for this caliber. Kinda saving my H4350 for my Creedmoor though...
Rate now:
65x55guyXPrivate
Rating: 0.0/5 this site
36 posts this site
Re: 6.5x55 loads
10/30/2016
This isn't really the spot for it, but I figured someone who has posted here might have a pair of go/no go gauges for 6.5 x 55 I could borrow. Have a savage action build with a Shilen barrel that's completed and shoots well for the most part, but gets pressure signs earlier and with less powder than anticipated.
It was built and head spaced with a more knowledgeable friend and we used a factory Lapua round for the go and added a piece of electric tape for no go. I would like to borrow a set of gauges if available and check out spacing to see if that's possibly the issue.
I will gladly pay shipping for anyone that can help me out.
Thanks
JTG
SOLD XLR 4.0 MAGNESIUM CHASSIS SA Remington 700
- By Metzger
- Buy - Sell - Trade
- 3 Replies
Attachments
SOLD Badger ordinance comm 30mm 1.54 blk 20 moa $180
- By Jeremyhunter
- Buy - Sell - Trade
- 9 Replies
Attachments
SOLD Accuracy International Vision chassis
- By DoubleD735
- Buy - Sell - Trade
- 1 Replies
Attachments
Bausch and Lomb 10x40 tactical scope
- By Calfed
- Observation & Sighting Devices
- 26 Replies
I recently glommed this scope at an auction. I think it is one of those tactical scopes used by the Navy ...
