485 Lapua 6.5x47 brass all from the same lot.

131 ...2x fired from 25x47
272 ....3x fired from 25 x 47
These are tumbled and annealed on my AMP.
82 ....3x fired from 6.5x47

Fired 25 necks are .288
Loaded 6.5 necks are .290


$300 shipped Paypal preferred
USPS Flat rate box with tracking

Used Geissele SSA-E trigger with trigger pins. $150 shipped.

For sale is a FN 502 Tactical .22LR pistol. This is in excellent condition with about 200 rounds of use. Included are the original 10rd and 15rd mags, one additional 15rd OE mag, and the original case, documentation, and optic mounting hardware.

$400 shipped from my FFL to yours. No trade offers, please. SOLD!!!

Selling a like new MDT weight for the SRS-X premier buttstock, asking $45 shipped in the contiguous US.

I built this last year and fired it a few times. Only my first cone had 3 small holes drilled in it for vents, second cone had 2, then none of the others.. why? I dont know why ... but I am getting a ton of gas blowing down into the mag and really dirty. My thoughts are to drill them all out with the 6 small radial holes like second picture and the end cap put a few vents as well. Hopefully to mitigate some gas.
This suppressor is a bit louder than firing a .22 pistol... loud but tolerable for a few shots.. with supersonics. Thats great, all I really expected it to do is take a good edge off.
Will drilling vents in all of them kill it and make it a lot louder? I did the first half, and not the end cap yet, once drilled I cant really go back. Or is sound going to so small not noticeable?

Lightly used Vortex Razor Gen 3 6-36x56 - took this off my back up rig so got very little action.

Comes with sun shade, zoom throw lever and MK machining parallax throw lever installed. I can also throw in a IDTS tape for it.

$2000 Shipped CONUS

Really Right Stuff TVC-24L Mk2 w/ Anvil 30 + RRS Tripod Bag.

RRS TVC-24L Mk2 w/ Anvil 30 + RRS Tripod Bag as I've moved to a larger model.
Barely used, tiny ding is highlighted.
Great lighter weight setup for hunting, spotting, photography,

Paypal $1250 Shipped in CONUS.

Wondering if anyone has a copy of the manual in pdf they could send me.
Thanks!

But what a game!

Looking for an Anvil 30, prefer it to be the older non R lock version.

This came in with an action I wanted. As tempting as the Dasher is, I'm passing it along. I don't need to add another cartridge to the loading bench right now.

Throat and bore look great.

Prefit For Zermatt TL3/SR3
26" Proof Competition
6mm Dasher
5/8x24

Can be used with an Origin with an HLR recoil lug.

$400 shipped

Looking to buy a 15.3” LMT MWS MRP-H upper. Really just need the upper, no bcg or barrel.

Part # LM308BML4A.

Let me know what you’ve got.

As the title states. These were purchased with the back of the mag catch filed/sanded down. Must have done a good job because I've never had an issue with either mag shooting 6CM/243/6.5CM/260/308.

Asking $150 shipped for both

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer. Trade? What do you have?

Reptilia 30mm AUS with RMR 12 o'clock ROF, 1.5 Height FDE, New never left the house. $OLD

URSA NorCal - Sunday, October 20, 2024

Location – Clear Lake area (same as prior, coordinates 39°14'21.0"N 122°50'50.0"W)

Setup will be done late Saturday or early Sunday morning by our NorCal crew. Target(s) will be in place at minimum 2000 yards. IRIS hit-indicators will be in place and be the sole control for official hits and misses. The initial target distance for NorCal is 2147 yards, all California-legal firearms and ammunition are allowed, no weight restrictions, and no fees.

The Match Director will decide how many shooters need to be signed up to move forward with this event. Unless the event is formally cancelled (as announced on this and other posting sites), assume it is going forward.

IF you want to shoot multiple rifles, you need to complete a registration for each one. If you expect to be shooting with us more than once, I suggest you do yourself a favor and build a text file in your word processor and then just copy and paste. NOTE: IF you seriously think you will score 5 in 10 or better, please DO take the time to enter ALL the info requested in the Build Sheet section - will save me e-mailing you to get missing info and hasten getting results posted on the URSA site (News and Stats pages) and the non-Cal Guns sites. Thanks.

If you want to shoot this event, you MUST sign up ONLINE (see below). Registrations MUST be received no later than 1 PM the day before the event. There will be NO onsite registrations. Registration is required for all shooters, spotters, and anyone that will be on or in the general proximity of the shooting line. NO exceptions!

The URSA Official Course of Fire is at FAQ 13, near the bottom of this page on the URSA website - https://www.unlimitedrange.org/operations.html All shooter should review the course of fire prior to arriving at the venue. Substantial additional data regarding URSA events are included on the same web page.

Sign-Ups: URSA uses the online program, Zoho Forms, to capture shooter Liability Releases and Build Sheet data, and spotter/other Liability Releases – Liability Releases are signed and dated at the event. Please use the appropriate link at the top of the Activity/Event Schedule page (http://www.unlimitedrange.org/activity event schedule.html). If you have any problem with the online form, please e-mail me ASAP ([email protected]). BTW, the form asks for limited “address” info (only city, state, and ZIP), we do NOT need your street address.

Just ordered a 18” 6.8spc barrel for my origin and now need glass for it. Will be used for East Texas hog hunting and be the gun that bounces around in the truck and SXS. We don’t have any place on the property we can hunt with shots farther than 200 yards. Below is my criteria.

Lower zoom to get bigger field of view. Something like a 2-10???? A 1-6 would be awesome but those seem to struggle when it starts to get dark.

Illuminated reticle.

Good glass to help pick out those black hogs at dusk and dawn.

Lightish weight. Don’t want a 30 oz scope on this one.

Doesn’t have to be ffp or exposed turrets and don’t care if it’s mil or moa.

Looking for a solar failsafe sight.
Thoughts on the Holosun 510 or 512 vs Sig Romeo4S? Any other options that might be better?

Looking to know which is better build, quality etc. I just impulse bought the Romeo4S cuz palmetto has a sale on it for $199 but want to know thoughts based on experience with either.

Prices are shipped conus. Pm me before posting here to avoid scammers.

Will entertain trades.
Pretty much getting out of 2011’s, but can use glock, Cz p10/shadow stuff, 10/22 mags, maybe optics….who knows, pm me.

1. Delta point pro, with rear Dawson rear sight $300 Sold

2. Tier 1 concealed xiphos for C2/X300 $75

3. Blackpoint Tactical leather wing owb for x300 $75

4. Dawson magwell $45 (SOLD)

5. Tenicor Sagax Lux (as is, with screws shown) $75

6. Garrett industries silent thunder owb leather lined kydex $75 (SOLD)

7. 6x standard staccato 120mm mags $55 ea (4 G3 sold )

8. 2x MBX defender mags with lockback followers $85ea (sold)

9. Chpws rmr footprint plate $70

Precision armament accu washer system and thread protector. 5/8. Used 1 shim out of the pack. $25 shipped

Good evening, LARPers

I am looking to purchase a split rig system to carry magazine, water, equipment, etc. when hunting under nods. I will likely start most hunts in the late evening with 1-1.5 hours of daylight so the rig needs to be a split front system in case I want to shoot prone, off a truck, etc. it also allows for a little more heat dispersion in South TX.

I have the options down to the Spiritus 34A and the Tracer Split scout.

1. The 34A is much more modular and can be used in conjunction with a butt pack. This would be great to carry 2 Nalgene bottles at a time. It looks to be a little more comfortable and spiritus has a good reputation. I don’t love the magazine “pouches” on the interior of the rig. I think they would rub when warm for a long time. I would likely mount on the exterior.

2. Tracer is known for being rugged. I like how the rig can be easily modified to use the internal mag pouches from 5.56 to .308 with ease. There is also a good amount of material between your body and the magazines. The downside is the lack of butt pack option.

Anyone have experience with one or both of these? Truly torn.

Price is not a problem so I am not concerned with what’s cheaper.

Never been used, in original box, comes with arca clamp. 300$ shipped using Venmo/paypal for payment and usps flat rate shiping

When all the jobs that could be outsourced... are. And when all the jobs that can be replaced by AI... are. And all the menial jobs that "Americans won't do" are filled by... I'll say imports. And the border remains open and our... "newcomers" receive federal assistance not offered to American citizens (excluding the folks directly impacted by Hurricane Helene of course because I believe they were offered $750 to restart this week)...

Who will be left to purchase our goods & services? Who will be left to purchase our real estate. I've said this before and I'll say it again, I used to revisit my father's hometown and was often reminded of which house the butcher, gas station attendant, baker, etc. owned and now... none of those professions could support a family on a single income and... the divide is growing wider each and every year.

There are folks that would call this progress but the jobs continue to dry up, and the purchasing power follows the same pattern... I'm not sure we've got much more "time" left in this equation and feel like we're quickly moving into a "have's & have not's" society and it's not based on much other than chosen profession and in many cases, luck & familial support.

As an example- 2 of my very close friends have something like 20 years of experience each in the HVAC trade- absolutely salt of the earth type of people. And they know/done it all, coal, heating oil, natural gas, geothermal, etc- but one is stuck in a townhouse he purchased 15 years ago, the other is stuck renting apartments and these are VERY skilled professionals but are absolutely stuck with no upward mobility and are just stuck in a "grind" in a trade that should offer them unlimited options. 20 years each of doing HVAC- I frequently call them up for help because they just have knowledge/skills I couldn't begin to fathom. But they're stuck in otherwise "good" jobs.

I spent the evening with one of those buddies (the one still renting and trying to buy a house of his own as he's approaching 40) and I asked him, what the heck happened with his industry. As of tonight- his answer was that many folks moved to Natural Gas over the past 10+ years and many of the companies he's worked for stuck with oil. Now both of them kept up and learned other types such as geothermal/propane/etc but their companies did not. The one I was talking to today spent a year or so in Florida and HVAC is even lower paid there then in PA (which is shocking to me because I'd have to believe that AC is of the utmost importance in a state like Florida).

Anyway, I'm ranting now I suppose but- my point is that there's a systematic problem that's been brewing for decades here and it's moving at an exponential rate. The question remains though is once we've "optimized" every part of business transactions and nobody that's left can afford housing or the products being sold (for that matter) where will that leave us as an American Society?

-LD

McMillan a3-5
Marble finish
Surgeon bottom metal
Remington SA
650$ shipped

Also pictured is a MPA Hybrid
Included with it is a standard and shortened LOP also has the longer bag rider
It has a light coat of spray paint on it
650$ shipped