Zero compromise 527 with mpct3x reticle. 15 mil locking turret with Spuhr 6001, caps, sunshade and scope chap. $3500

Can get better pictures tomorrow or take specifics on a individual basis as needed

Like new condition, not a mark on it.







Includes original boxes and SOC.

$2500 $2000 shipped/insured CONUS, AK & HI, we can talk. PP F&F (preferred) Zelle, Venmo (just a heads up, Zelle & Venmo are my wife's accounts), cash, USPS or Walmart MO, checks held until cleared.

Just curious is there are any folks that have experience with the Burris Signature HD, specifically the 3-15x44? This scope checks a lot of boxes for me as far as weight, locking turrets, zero stop, adjustable parallax and illumination. But I’m looking for some feedback from people that have hands on experience with the scope. I can’t find too many reviews on them. Thanks

Brand new CZ 457 HBI chassis with Luth-AR MBA 4 stock and cheek riser, and L3i weighted ARCA rail. Had action mounted in it but was never shot. ARCA rail shows some wear for on a previous build it was on. This is the exact same chassis the 457 VPC came in. $500 OBO shipped to your door. Comes with everything pictured cz457 22lr inlet

Used for couple hundred rounds. Has everything that came with it from FA. *sold*

Finally put together the ar10 parts I had lying around and it work great once I got the gas block adjusted but then it started having issues ejecting and seemed to really chew up the rims.

I know the AR10 ejectors are normally pretty rough on the brass but I just want confirmation on what I've gathered from forum browsing.

Based off what I've seen it probably wasn't gassed properly, or the buffer weight was off, but weighing more towards improper gassing



This was running it with empty casings just to test cycling, work work fine then every couple rounds it would either fail to fully pick up a round which is probably cause it doesn't have a bullet or fail to fully go into battery

Selling Nightforce ATACR 7-35x56 F1 Mil Tremor 3 Riflescope - NF Rings Included - Asking $3200 Shipped

Lightly used and kept in pelican most of the time on top of rifle, works great, just not a perfect fit for my job

I have a howa mini action in 6mm arc it has an 22” barrel and I’m about to get into loading for it. I really am only doing it for a velocity increase as well as being able to shoot the heavier bullets does anyone have any sort of powder the like best. I want to shoot in the 2700 fps and up area.

What classic long action cartridges are available (other than 30-06) preferably something higher velocity. I’m looking to build a rifle for my dad and he likes the older stuff.

While cleaning out my reloading stuff, I found a box of these, opened and with 80 rounds in it. If someone loads these and wants to pay for shipping, I'll send them to you.

Price: $20

I have had 2 stocks on order from Manner's since November of last year with no estimated delivery date. I have lost all interest in this. I really do not want to ship, I do not have PayPal or Venmo, or any electronic payment method.

Solus Matte Nitride .478" $600 ftf Sold to @Spd37

Solus Obsidian BLEM .478" $625 ftf Sold to @VaderRubiconJK
Edit The Obsidian is a NIB blem

I have a NIP .540" bolt head $95, 419 chamber/thread protector $40, 419 bolt handle adapter $25, NIP barrel nut $26, NIP wrench $23, NIB Aero action wrench(not shown) $90 available with the action/actions


Bartlein stainless .264, #3 contour, 7.5 twist, that is a hair over 27" long that was ordered to finish at 26" $425 ftf

Located in Fort Worth, Texas

Willing to meet within reason.

I have a rebar-based target holder I use at my gun club's rifle range. It's maybe 4' wide. Most of my AR500 targets are hung by chains and S-hooks but they usually start walking down the crossbar one way or the other and eventually slide into other hanging gongs. It happens more with my smaller gongs as they jump and twist more from hits than the heavier 6" and 8" gongs. Any suggestions for trying to keep the chains in place?

What make / models would you recommend?

Presently have a 20” LWRCi R.E.P.R. in .308 Winchester which is grossly inaccurate for the money I paid.

Would’ve liked the SIX-8 A5 because it does look kewl, if not for anticipating the same issues above (“You don’t get it - it’s built as a 4 MOA combat rifle!”).

I’m not even sure which ones use proper 6.8mm SPC magazines.

My new scope and mount is set to arrive tomorrow and the first thing I plan to do is re torque my rail and then get it mounted and thread lock everything, and possibly even thread lock the turret screws (one review showed that they might come loose, but that may have been a one off). My question though is which thread locker should I use, at first I was just planning on blue loctite but now I have discovered a new (to me) product called vibra-tite and it looks like it may have some advantages over loctite. What do you think? Is blue loctite enough or should I find some vibra-tite? If so which kind?

On a related question, the scope rings require 18 inch pounds of pressure but I had a hell of a time finding a torque wrench or driver that would actually do 18 inch pounds, all I saw were marked in 5 inch pound increments so that I could have done 15 or 20 but not 18. Finally out of frustration I just bought an old school beam style torque wrench because I can eyeball 18 (it is marked in increments of 10 with hash marks every 2.5 and also in newton meters and 2 NM is damn close to 18 inch pounds). Are their any issues using the beam style over the more modern click style?

Selling my labradar which has only been to the range a few times for load development on my new rifle. It comes with the soft carrying case, the labradar tripod, and a remote switch that mounts to Picatinny. The velcro on the front is for an external battery. Asking $350 shipped

Brand new in plastic wrap. $340 shipped

5 AI branded 5rd 308 metal mags $200 shipped sold to @kft101

2 Curtis branded 3rd metal mags $150 shipped Sold to @Bakwa

All that is left

2 MDT 5rd polymer mags $50 shipped

1 MDT 3rd polymer mag $30 shippedd Sold to @Bakwa



Bought these to try in Snowy Mountain and Hawkins Hunter bottom metal, Curtis would work, may rattle, MDT 5rd won't work, 3rd will fit flush but impossible to remove easily and AI 5rd hang way down. MDT are new, others were purchased used. I am trying to be fair and not lose too much money, IIRC, these are the prices I paid, if you can prove otherwise, I will sell them for exactly what I paid

I have a used Kelbly atlas tactical short action for sale. It is in very good condition. Used as a 6BR and briefly as a 6 XC. Never hot rodded, mostly a range gun. Looking for $825 for the action or $1100 for the action with a 6 XC barrel. Also have some 6 XC brass that could be worked into the deal.

Looking to pick up a factory pale brown forend grip for my AX. I currently have the RRS aluminum replacement just looking to return to factory. Part number is 26976PB

Cz 457
Good condition
Tool less length of pull
Butt hook
Brand new mag filler carbon fiber
2 pic rails
Aluminum trigger guard
This a catch and release. I was going to make it a lefthand
$400 shipped conus
PayPal friends

Dumb question but does anyone know wether the stock pic rail on a m2013 is 0 or 20 moa. i dont have mine in hand atm and cant find any definitive info. TIA

Brand new set of large FDE grip panels (new style with inserts) Looking to trade for a small set in any color.

I also have a few sets of the older style large black panels (without inserts) I would trade for some small sets.

Looking to pick up my first can (rimfire). Some of the local shops want to charge $100 for a transfer and looking online it seems like there's some decent options from places like Capitol Armory, Silencer Shop, Silencer Central etc. Any cons to just ordering from one of them online? Any shop preferences or things I should have in mind?


Also, any good reason not to dump it into a trust while I'm at it?

An Alaskan man was arrested for making threats to SIX SCOTUS Justices. Only SIX of them wonder which 6? Panos Anastashsiuo sent over 450 emails and messages through the courts portal containing death threats to the Justices and their families. The next FT. Sumtner cant be very far off can it?

up for sale is a new FN 510 tactical model in FDE. I bought this new a few months ago and have not shot it so it is unfired outside of the factory. It was in and out of a holster a few times but not carried and shows no signs of any wear. Includes the soft case, 1 15 round mag, 1 22 round mag and an Odin tactical valknut OWB holster.

$800 shipped from FFL

$1275 shipped with brand new only mounted never fired acro p2 and correct mounting plate

$1525 shipped with acro p2 and brand new never fired x300u-b

10mm ammo is available to buyer as a package deal as well