I have a custom built, Piercision rifle for sale.

25sst (not a B chamber)
Have a picture of the build sheet from Ryan when he built it for me below.
Has a 24" proof cf 1-8 twist

I built this rifle to bridge a gap from coyote hunting on up to mule deer. I have since built some specific hunting rifles and no longer shoot this rifle much and it just sits.
It shoots lights out and is definitely a 1/2 minute gun. I have a load built for it with 135 bergers and n565 running 3100fps and no pressure. Have taken several coyotes past 500 and my personal best coyote at 815 yards. Rifle has under 400 rounds through it and has plenty of life left!
Would like to sell it all. Brass dies rifle and berger bullets. Shipped from my ffl in Kansas to yours.

3800 and i will cover shipping

Want to purchase a new or like new ZC420 Tremor 3

Hi,
I was just wondering if anyone had a set of 6.5 Addiction dies they are looking to sell.

All items are brand new in package.

Noveske Nitride N6 Complete BCG with bolt and firing pin.
$200

Noveske marked Geissele charging handle
$80

3 sets of Noveske Take town pins
$30

2 Noveske H3 buffers
$30

Noveske 308/6.5cm buffer spring
$5

I’d prefer to sell it all together for a package price.

$300 shipped for everything

PayPal FF, Venmo or Zelle

All these are Magpul M3 7.62 magazines for AR10/SR25.

8 20rd
3 25rd
8 10rd

All of them except 1 are brand new and have dust covers as well.

I prefer to sell them all together for a bulk discount but I’ll sell a few at a time for $18 shipped.

$265 for all of them shipped

PayPal FF, Venmo or Zelle

I’ve got two up for grabs. Both used but in good serviceable condition I’ve owned em for idk how many years., it’s time to move on. glass is clean. 1400 for#1 1600 for #2 OBO. Doesn’t include rings. Shipped/insured.

#1- mk4 2.5-8x36 MR/T M1 illum mil dot
#2. Mk4 3-9x36 MR/T Mil Dot with M3 M118LR marked turret. This is what became known as the TS30.

Just wanted to give a quick shout out to Camera Land NY and @gr8fuldoug! I called Camera land looking at a few options for a new scope. Somehow throughout the conversation, I brought up a problem that I had recently experienced with a manufacturer that unknowingly Doug had some experience with. He offered to reach out and see what he could do to help on my behalf, even though none of this was his fault or his responsibility. The next day I get an email from said company with an offer that made me sit back in my chair for a minute but absolutely made up for the run around that I had received previously. Needless to say I'm extremely thankful to Doug for his help and I also bought a new scope from his company while I was at it because along with obvious great customer service, they've got some great prices. Just for the record, I had never heard of Camera Land NY until this forum and had never known or spoken to Doug before rhe phone call. I just believe in the current economy that we live, good customer service and old fasshion care and decency should be applauded and that's the reason for this post! Thanks Camera Land NY and @gr8fuldoug !

Remington 700 short action with standard .308 bolt face. Has about 200 rds of 6GT through it. Excellent condition.

- RAR prefix action
- Timney the HIT 8oz Trigger
- NF 20moa rail
- Firing pin bushed by LRI
- Large bolt knob

$650 shipped to the lower 48 only

PayPal F&F or Venmo

Picked this up earlier in the year. Not going to use it. $560 shipped. Venmo preferred

Package deal only, don’t want to mess with shipping a bunch a little boxes.

- Radian Raptor America CH (mocked up, but never shot with)
- Radian America Ambi safety (never installed)
- Triggertech Duty 3.5lb trigger (used)
- Magpul ACS milspec stock (like new)

$260 shipped to the lower 48. PayPal or Venmo

I need a fairly economical priced drill press. I don't want junk but this is just for some shop projects. Mostly will be drilling steel. Nothing to precise. I have been looking around and I can't tell what is good and what is trash.

Free standing or bench mount is fine

I have 2 of these brand new still sealed in wrapper.

$180 Shipped for 1
$350 Shipped for 2

Hi everyone, i already posted a similar thread on another forum (more hunting oriented). I know you guys are more knowledgeable about precision shooting so i will ask here for more insight.

I recently bought several sets of rings from a reputable brand, very appreciated on forums. They look good quality. They have an integral level in the base. I opted for that model based on reputation and onnthe fact that the level, placed in the base of the front ring on the left, looked like a good compromise for a 450 yards max hunting rifle (take note that i will shoot up to 800-1200 meters at the range with this same gun but the main use of the rifle is to hunt roes, boars and fallow deer). This way i am able to check the level when rarely needed but at the same time the level doesn't stick out too much, keeping the rifle convenient to carry.

I made a test and found out that ALL the 4 rings i have, bought in a 1 year timespawn, have the level.. out of level! It's just a matter of half a degree and i know that, as long as the reticle is plumb to the bubble level, the level being off (and thus the rifle being canted) 0.5 degrees is no big deal, especially for the distances i am shooting at. That said, every one of the level is canted in the same exact direction and everyone is off by 0.5 degrees (this value was tested with reliable equipment and was the same also on my colt le6921 rail). I checked with rings mounted and torqued on a high quality integral scope base (defiance) and using multiple levels i know to be on spot as a reference). Also when leaning on a flat surface and not clamped to the rail, the rings showed the same exact cant.
The fact that all the ring levels are off by the same exact amount in the same directions tells me that the manufacturing of these rings is very consistent.. consistently wrong though!

How is this possible? For at least 1 year a reputable brand (i will not say the name of the brand because they have been great in assisting me and accorded a full refund) produced defective rings?

Thanks guys!
greetings from Italy

Is the kestrel “drop” compatible with the vortex fury to provide atmospheric data to correct firing solutions or does it have to send data to the phone app and then to the binoculars?

Looking for input from any of you nerds that have tech experience in the phone/internet/cell/data security lanes.

A couple of buds pointed me to this new phone rollout. Link: https://www.unplugged.com/

Runs on an Android framework but without GMS and other tools that enable snooping. Kill switch that disconnects the battery from the electronics and a "wipe" feature. Everything outbound is encrypted. Several other features that are aimed at security. I already run Android / Samsung so even I might be comfortable with normal use of the Unplugged phone.

During some of my caveman level internet searches, I found this segment of a Shawn Ryan interview with Erik Prince. They discuss the new Unplugged phone rollout from 1:00 to about 1:08.
Link: Login to view embedded media

Regarding privacy/security, does this have merit?
What am I not seeing?

Thanks in advance for any constructive input or cautions.

T.

.

MPA BA Scope Mount for sale. 34mm diameter, 1.50" height, 0 MOA cant.

Also comes with a pic rail for the scope mount.

$225 shipped.

Looking for the following rifles

Remington CSR
Remington PSR
Remington MSR
Remington Xm2010
Remington M40A6
Remington CTSR

message me with what you have

Anyone know if any gunsmith would contour or re-contour a barrel. I have a hawk hill straight taper comp contour. Due to the diameter, I can’t use my nv bridge on my krg x-ray.

Love seeing stuff like this. It's just pepper spray bro. LOL Sad part is, Mommy still supports this dumb shit.

Login to view embedded media

Folks, I recently picked up a post 14 AI AX and it came with a RRS Chassis plate. Nothing wrong with it but I find myself wanting to return it to factory. Called Mile High and Euro optic and no such luck on such a random item. Anyone know of an alternative place to find a pale brown chassis plate for an AXSA? If a member here has one and wants to trade for the RRS I would gladly welcome that trade as well.

Help Hide please


Looking for the barrel break in video. I think it was "nobody", very early SH member.

Throws the rifle around on the ground until it sounds right, then slaps a plate at 7 or 800.

I know someone knows what I'm talking about.

Thanks Hide

like stated. slip into those dms babe

Like title says. Looking for 1k -2k same lot if possible

For Sale Vortex Fury HD 5000 AB 10x42 Laser Range finding Binocular LRF302.

$1100 shipped to you.


Brand new condition, taken out of the package to test it out.

I am in the midst of setting up my Sig Kilo 8K now that I have a chrono.

I can setup all bullet data, rifle data, and specifically temperature and velocity at that temperature - but nowhere under the profile editor for custom profiles where you setup a rifle profile does it ask for the air pressure or humidity when the data was taken. And yet, when you go to make a range card, it does ask for this information.

So... how does that work? What am I missing? Aren't both these items important as the LRF feeds the atmospherics into the AB software for a solution. If the setup has no pressure or humidity data for a known zero, how will it accurately compensate?