For Sale

4 x Autel Evo2 v1 drones

3 of them are thermal (one of which is an enterprise package)
1 is a 6k day drone
The enterprise comes with a smart controller and a speaker and lights and a beacon (these last three are modules that plug in to the foretop of the drone).
.
I have 1 other smart controller that will work with any of the other 3. Whoever buys it first gets it.

I have 2 v1 live decks (pics pending). Go to whoever buys them first.

Total 14 batteries. Each drone will come with 3 batteries (how many they normally come with). The other 2 go to whoever buys them first.

Each drone will come with a stock charger. There’s a fifth charger that goes to whoever buys it first.

Each drone will come in its original factory hard case.

The 2 v1 thermal drones have FLIR camera, the enterprise has an IRAY camera.

One of the v1 FLIR drones has a customer remote chest carry rig.

If someone is interested, PM me. Tell me where you are (zip) and I’ll estimate shipping online with UPS (you can replicate to make sure I’m not cheating ). Then we will add that to the price. Shipping these dang hard cases isn’t free !

UPS Ground Shipping estimates

(A) V1 Enterprise $114
(B) V1 thermal $103
‘(C) V1 6k day drone $53
Thermal drone $3000
Day Drone $900
WIth hardcase, 3 batts, charger, extra props, regular controller
Smart Controller $500 (Enterprise comes with smart controller only, but has additional add on attachments)
Live deck $250 each
Extra Batt $150 each
Extra charger $25
Fox Fury $120 (exolander)
Fox Fury (lights) $25 each
Extra remote ($100)
If an accessory won’t fit in the hardcase, I’ll pay the shipping for that.

I’ll put up a few pics, but won’t put of pics of everything - too many pics. If you need more pics, PM what you need.

V1s are have no built in RFID. Bring your own RFID strapon.
V1 are a little less nanny on atti mode and hurrying RTB under certain conditions.

(I’m going all in on buying parts and assembling my own - to gain more interoperability)

PM for questions

Thanks for looking !


==
V1 Ent with Smart controller


==
V1 FLIR with customer chest carrier


==
V1 FLIR


==
V1 6k

Anyone watch any of this stuff on Reddit? It's crazy.

All of the footage they show in Ukraine is so bizarre with all of the drone use. For someone who holds a sense of regret for not going into the military, I could not imagine fighting today if this is truly what things have come to.

The whole thing is camera footage of drones just taking out soldiers on foot. As a foot soldier, you literally have no chance of hiding anywhere. Forget running and gunning, these guys are on camera trying to hide from someone behind a screen with a remote just hunting them down with a drone in the sky.

If it's actually real, it is scary AF and also cannot imagine how someone can voluntarily sign up to be in those fields. It just looks like you have 0 chance of anything.

I have 3 bricks same lot $175 shipped
Or 5 bricks for $290 shipped.

I am down sizing some of my ARs; have an unfired LWRC Di with the ambi lower and spiral fluted 16” barrel. It was one of the limited run factory Multicam cerakoted rifles (not black multicam but standard). It will came as factory standard not with items mounted (scope, light etc.) and with the black buttock shown not the Bcm. The trigger will be the standard not the swapped 2-stage as well as standard Lwrc charging handle not the Geiselle. I am looking for $1700 shipped from my Ffl to yours. I accept PayPal ff.

I have a vision chassis inlet for a Remington 700 short action. Chassis is cerakoted grey but has fde, dull green Aluma Hyde on it which can be easily removed by purchaser if desired. There are some slight marks on the arca interface and minor relief for bolt handle clearance on the buttstock. It comes with full internal weight kit, 6x external weight kit, fixed stock interface, folding stock interface, and night vision bridge. All in the would be ~2300 new. Asking $1500 shipped within conus, with any extra insurance on the purchaser. I accept PayPal ff. Would entertain partial trades for terminus Zeus qc 22 gt or dasher barrel with minimal to no round count.

I know they made the 22 barrels for voodoo. But has anyone tried there blanks in bigger magnums? Do they hold up at elr distance like the other barrels?

What are y’all’s favorite hunting knives?
Not for killin’ , but for skinnin’.
If you could take one blade to cut up a deer with out on the field, what would you bring?

Bushnell Forge 2.5-15x50 FFP MOA. Mounted scope and fired less than 10 rounds. Perfect glass no scratches. Comes with box and papers. $400 shipped usps paypal

Looking to sell the following 300 Blackout reloading components:

Hornady V-MAX 30 Cal 110gr, 150 pcs - Sold
New American Eagle Unprimed Brass, 300 Blackout, 200 pcs - Sold

Prices include shipping CONUS, PayPay F&F.
I will give a discount if you purchase both items.

Like new Vortex Impact 4000.
Never used.
MKM ARD w/flip cap.
Apache 1800 hard case included.
Original box with all internals included.

Bought from Eurooptic Jan 2025.

$1500.00 shipped

Paypal F&F preferred.

Looking at powder options in a brand new Brux 6 GT. 107-108-115 dtac does anyone have any experience. What say the hoard?

Testing the waters, Have a BNIB KAC SR-25 ACC 14.5" Upper BLK w/ a Nightforce ATACR 1-8x24 F1 Capped BLK in a KAC 34mm mount BLK. $8100 shipped.

Will sell the upper individually for $5900.
Will sell the optic & mount separately for $2500.

Message me for pictures and I'll take pictures of any details you want.

4.5-29x56 APRS1. ffp.

Great glass, I’ve taken it out twice. Just don’t shoot LR like I want to. Selling the rifle this was on.

Rings not included,

$1250 shipped

For sale

- like new 35mm Badger C1 max black 1.54 with hawk hill data board $350
- like new 35mm ISMS 1.54 Leupold tanodized contract SASS mount with diving board $450
- 34mm 0moa 1.54 ARC M - brace with bubble level $325

Prices are shipped. No trades. Pm for more pictures.

Looking to finish my mk12 mod H clone and need the diving board for the Leupold 35mm ims mount (comes in the mk5hd 3.6-18 contract scope) Will pay $500+

I was thinking of building a 8.6blk on a rem700, but I had supersonic loads in mind specifically. Running subs only in my semi currently. So what I'm really asking is, I can have the 1-3 twist or an optional 1-10 twist. What would be best for the caliber, running only supers in a bolt gun. And I have options from 12-26" in length in increments of every 2" also.

I have watched several videos of shooters engaging multiple targets at different distances, but they don't adjust parallax for each target. I understand parallax. So, what is the standard practice for this situation?

This thread started out with some posts about various M40A1 parts that I had on hand to build a few clone rifles from. However, the thread has now morphed into a resource for all things M40A1 related. If you have any original USMC M40A1 parts or M40A1 clone builds, please post them in this thread!




I was going through my M40A1 parts today and I'm trying to decide which A1 configurations I want to build. I've been collecting M40's and original M40xx parts for about a decade now, but one rifle still eludes me -- the M40A1. I recently picked up a 221xxx receiver and I think it's finally time to get a few M40A1 builds completed. I currently have 3 receivers from donor rifles, so that constrains me to only 3 clone builds. However, I have a bunch of original USMC M40A1 parts and I need to carefully choose which parts will be used on each build.

There were actually a few different "types" or "configurations" of A1's built over the decades and I want my clone builds to reflect the changes that were made. There's quite a few ways to mix and match the parts, with some arrangements making more sense than others. For example, it's historically correct to use a Unertl 10x scope with a Redfield welded mount, but the Redfield greenie scopes were never used with the Unertl mounts. Some parts might also look better together based on when they were issued. For example, I personally think that the earlier Redfield greenie scopes look better when paired with an early wispy smear stock, as opposed to being paired with a much later woodland pattern stock.

With all that being said, I can finally get to the point of this thread. I'd like your help with deciding which parts should go together on each of the 3 M40A1 clone builds, and I'd like to share some photos/info of rare parts with everyone. I think that this could be an interesting conversation based on the numerous parts that were used on the A1's and when they came into service. If I like any of the M40A1 configurations that you guys come up with, I'll have my gunsmith build the rifles that way.

Even though I'll have to decide what the final A1 clone builds will look like, I still really want to hear what you guys think about which parts should be used on which builds, and how you settled on that exact specification. I bet that some of you will put together combinations of parts that I wouldn't think to use, and you might have a very rational explanation to back up your choices and parts selection.

So, what do you guys think? Is anyone interested in discussing rare M40A1 parts and how a few clones should be built? I numbered each item in the photos of the parts, so they should be easy to refer to. I also have more M40A1 parts that aren't in the photos, so if you think that I'm missing something like an unmarked Redfield 40X base/ring set, please say so. I forgot to add an unmarked 40X base to the photos below, but it might be the best option for a build that uses the unserialized Redfield greenie scope that I do have in the photos.

I hope the purpose of this post makes sense and I hope you guys will have fun mixing and matching M40A1 parts together in order to create the best clone builds possible! I'll break up the various parts into separate posts, so it will be easy to see things grouped together and I can always go back and add more photos/information to each post if need be. Who knows, maybe if this turns into a great discussion thread I might decide to give away a rare M40 part or 2.


I'll start things off with an early transitional M40A1 variation (the numbers are the choice from that item's group photo in the other posts):

Stock - #1, early wispy green smear
Scope - #1, 221xxx marked Redfield greenie with a 221xxx marked Redfield base
Mount - Not pictured in the mount's group photo, the 40X base is already on the scope
Barrel - #1, the earliest of the 3 barrels ans is dated 1978
Receiver - #1, early 221xxx serial number
Rational - I chose the earliest item from each of the 5 groups of parts in order to build the earliest issued transitional M40A1. Since I chose the 221xxx receiver, it makes sense to also choose the 221xxx marked scope and 221xxx marked 40X scope base. Although 700SA bases were also used on these early transitional A1's, I just prefer the 40X base (for aesthetics if the 40X base has square corners). I also chose to use the earliest barrel, which is also marked with a date and the caliber. These markings might have only been used on the earliest barrels, since later versions had different markings or no markings at all. So, it just makes sense to use the early barrel for the early transitional A1 build, especially when we can prove that it is indeed an early barrel.

Like new (seated in rifle, no range visits) Gray Ops BR/Dasher AW mag
Comes with orange mag base pad

SOLD (back to OO)

New never fielded TBAC Bipod and New in package TBAC Spiked feet.

Bipod $SOLD Shipped

Feet $SOLD Shipped

PayPal Friend/Family Accepted

Unused, no box. 6" blade, S35vn steel.

$500 ftf, $525 shipped CONUS.

I just updated FW on my 901 and now the velocity of my gun profiles is all weirdly high and goes up instead of down as I change range. MV of the profile in this pic is 2865 and as I increase range, the velocity of this field keeps increasing. Any ideas? Nuc it all and start over or ??

Like New and barely used.

$80 Shipped

I am currently about to start load data for my Dasher and am looking at what works for you guys out there (powder, charge wt, bullet jump, ect). I want to keep this thread strictly about data regarding the Berger 109gr Hybrid in the 6 Dasher, so please leave out your favorite 105gr VLD/Hybrid comments. I am using Alpha Brass and rem bench rest 7.5 sr primers. Thanks

Like new 35MM 1.10 height Area 419 Match scope rings. Includes area 419 level

$175 shipped