Placed an order with PROOF on ExpertVoice, not realizing that they had a very extended lead time despite the barrel being shown in stock, so looking for a stop gap solution. Must be a steel heavy contour barrel, length isnt super important - lets say min 20in but may take an 18. Can be factory or prefit, round count isnt important as long as it isnt clapped out.

Looking to pay $200-$500 with fast shipping

Thanks!

McCann Industries MIRS REV B LA. Unmarked REV B. There are no cracks, it just looks like layers of paint have chipped over the years. $1100 shipped. No trades. Price is Firm.

Hi everyone, I wanted to share my recent experience with the Barrett MK22, because I was honestly surprised and think it’s worth discussing.


I own an MK22 with relatively light use (under 200 rounds). Recently, I purchased a 7.62 barrel conversion kit together with the official MK22 armorer’s tool kit directly from Barrett. When I went to install the new barrel for the very first time, using the supplied 140 in-lbs torque limiter and the Torx Plus T30 bit exactly as marked on the receiver, the handguard cracked while tightening to spec.


This was the first time I ever swapped the barrel, using the correct official tools and following the manual step by step. I didn’t expect something like this to happen on a rifle of this quality.


I’m already reaching out to Barrett for warranty support, but I also wanted to post here to see if other MK22 owners have run into similar problems. Even if it’s a rare defect, I think it’s important to share so others know what to look out for.


Has anyone else experienced this, or heard of MK22 handguards cracking during barrel changes?


Thanks for reading.

Knight's Armament Lightweight Match with 20" Mk11 Mod 0 barrel. Used but in excellent overall condition. 20" 5R Obermeyer match grade barrel. Vero Beach marked rail and lower receiver. 2 stage Knight's trigger. Front and rear sights included. Bolt is serialized to this serial number and one other (not sure why). Serial number falls directly within military Mk11 Mod 0 serial range. Comes with operator's manual, surplus Pelican 1700, three 20 round mags and one 10 round mag.

Asking $10,000 shipped to your FFL where legal. Electronic payment preferred, but I am flexible. No trades.

Two Mk11 kits in this serial range have sold recently for $44,063 and $52,875 at Rock Island.

Guy walking with his 6yo kid takes picture of Antifa-type lefty BLM Ukraine TDS graffiti painter and gets shot.

Not sure how this is possible in strictly-gun-controlled Mass.

The loonies are on the loose! And are stacking bodies. Keep your head on a swivel!!

Sirhr

PS thanks to Phil for forwarding!

Factory AI M27 tenon 6.5CM from an AT, started life as a 24" barrel, chopped to be flush with my ATX handguard. Finish length now is 18" and some change. Under 300rds on this barrel. 5/8x24 threads.

Save yourself some math and finding a competent gunsmith to have the coolest ATX at the range.

Selling a lightly used CA MCR chambered in .308, used at the range and never in the field. Less than 300 shots fired through it.

$1700 Shipped to ffl

Here are several ai at/ax skin pieces.

2x dark earth grip panel sets
1x dark earth buttstock panels (folding models)
1x dark earth pistol grip
1x pale earth pistol grip
1x foliage green buttstock panels (folding models)
1x foliage green forend


Selling as a lot as I no longer have a chassis.

Hard to find.

$120 shipped

Paypal or Zelle

I have 2 1 lots of new/primed 300 Norma Mag brass made by Lapua under SOCOM contract. These brass were overrun and headstamped CPG 20. CPG stands for Capstone Precision Group, the parent company of Berger Bullets and the SOCOM contractor for 300NM cartridges.

$145 shipped for a lot of 100.
SPF

SOCOM contract info:

Brand new proof 6.5 Grendel, 12.5”, mid length, 8 twist.

$500 shipped

Brand new Talley 30mm X-Bolt Rings, High - $55 shipped obo

2 new Savage tri-rail scope rails that came with the 93R17 trr-sr. I lost the screws so just the rails. - $20 each shipped or both for $35 shipped.

Complete Sig P365XL slide with True Precision upgraded barrel. Everything bought from Sig. About 200 rounds through it. Paired with the Sig XL grip module. Together 450.00 shipped. Willing sell separately - make offer.
I also have some Tactical Development mag base pads to convert from your standard mags to XL grip. 6 for 12 round mags. 1 for 15 round mag. Let me know if interested and I can sell separately. They are very nice if converting from a standard p365.

286, 292-293, 332
New never used. 10 dollars each. 5 dollars shipping any quantity.

L3 PVS-15 Objective and Ocular housings and EGAC/Pigtails

Have 4 each like new objective and ocular housings for PVS-15 lenses, $125 each.

L3 EGACs $75 each

Buyer pays actual shipping charges. Will accept paypal F&F, zelle, USPS MO, and checks (ship once cleared).

As title states have two Insite arms G2 brakes. Both are brand new unfired. Some minor rust on the back of the 5-port from storage. 5-port G2 30 cal threaded 3/4x24 $120, 4-port G2 6.5 cal threaded 5/8/x24 $100. Take $20 off if you buy both. Add $10 for shipping. Will accept paypal (F&F), zelle, usps MO and checks (ship when cleared)

Deal of the week, Rim X Prefits
We will be offering these as we chamber and test them. I had a bunch of various barrels we had ordered to try; our loss, your gain.
This is a great deal for a person who needs a lighter setup in a Rim X, **Sold**

Next one is 25" 1.250 12 Twist Lother Walther, Great accuracy for the price.

ZCO 4-20x50 MPCt 1 reticle, 15 Mil locking elevation turret. ARC rings, MK machine level. two range sessions with my 6.5 PRC maybe 50 rounds. Like new condition. It's way more scope than I need on my hunting rifle. I'm afraid to take it in the mountains hunting, don't want to scratch it. Would like to sell with rings and level. Asking $3700 shipped and insured TYD.

Folks, I suspect our Xero Sled will fit the Athalon. I need someone who owns one of these Athalon chronos to test fit it for me, take photos I can use and potentially do some accurate measurement if I need to do any tweaks to the design. From the photos on the Athalon website there is a small ridge on the ends of the bottom that may or may not be a factor, no dimensions for that ridge are available.

First DM that I get, I will send one Xero Sled to you free of charge in return for the testing and photos. If you are not familiar with the Xero Sled, you can see it here.

I appreciate the assistance!

https://mcleodprecision.com/products/xero-sled-v1

Thank you!
Kevin McLeod

Good until midnight MDT on Monday 9/1/2025.

LABORDAY20 at checkout for 20% off.

We are doing a large run of parts this weekend and wanted to share some of the fun with you all. Have a great and safe Labor Day weekend.

https://mcleodprecision.com

Thanks,
Kevin McLeod

Sitting on my spare rifle that’s occupying the safe. EOTech exps2-2 w/g33. $900 shipped on the Unity Fast riser and flip to center mount or $700 shipped for the stock configuration. Original case and parts included.

If you've never played before, this is a fun way to while away the upcoming college football season. In a nutshell, pick one team that hasn't lost yet. If they win you get to pick another team the next week. Lather, rinse, repeat. No prizes, just for fun. By the 8th or ninth week of the season, the number of undefeated teams usually gets down to 10 or 15, so you might want to save the top teams for deeper into the season.


Rules
1) Pick one college FBS (aka Division 1) team per week. (136 choices week 1!)
2) The team you pick MUST BE UNDEFEATED and PLAYING THIS WEEK.
3) Once you pick a team you MAY NOT PICK THEM AGAIN.
4) If your pick loses you're out. You only advance to the next week if your pick wins.
5) If you fail to pick in a given week, you're out.
6) Last player standing wins.
7) Picks must be posted in that week's thread.
8) If all the undefeated teams lose in a given week or no survivors can advance to the next week, the tie breaker is the player who posted earliest in that week's thread.
9) Each succeeding week, post your pick for that week, as well as those of your previous picks. This helps YOU not to repeat a pick.
10) If you decide to change a pick, don’t edit the original post, just make a new post. I use the last post you make for your pick. This will also affect tie breaker (Rule 8)
11) Be very clear with your pick. Follow the name format of ESPN Conference Standings. (i.e. OSU could be Ohio State, Oklahoma State, or Oregon State)
12) Schedule weeks are per ESPN.
13) Keeping up with your picks is part of the game. If someone picks a team that has a loss or is not playing that week, don't feel it is your civic duty to point out the error of their ways.
14) Pick must be in thread before kickoff of your game.

Here is a link to the Week 1 Schedule College Football Schedule - 2025 Season - ESPN

Tricky bit in week one as 8 teams play twice in “Week 1” (Rule 12). If you pick one of those, you must designate which game.


Post your Week 1 picks in this thread.

BNIB
$1000 TYD

Mk4 6-24 PR2 reticle

Zelle PP or Venmo

Trades: Vudo w/ h59 reticle or towards an MDT premier

I was going to cerakote this FDE, I never got around to it. I’ve cleared a good bit out of the safe as I’m preparing to start a new career path soon.

Zero rounds through this. It was an upper and a lower. All the stuff that comes with the upper new is included. Everything in the photo.

D Wilson ARCA rail for URX6 included.

I also have a 7.62 QDC in FDE I used on another SR-25 that has maybe 300 rounds on it if the buyer is local to NC.

$$$$ shipped and insured.

No trades. Thanks

Hey all,

Selling my ZP5 3-15. It's mostly brand new. I took it out once to a friend's ranch to do a bit of LR shooting and then it's been with me hunting a couple times.

I rarely use the rifle this optic is on and the few times I've used it, I've realized more and more I do not really care much for this reticle. I also have another FN SPR that is needing glass so I've decided that selling this could go towards replacing it with something that has a reticle that works for me plus have a bit leftover to put towards glassing my other SPR. There are 3 very small blemishes that I have pointed out.

1. The time I took it out LR shooting I didn't realize that my rifle was ejecting the spent brass onto the windage turret and erector housing. I've done my best to photograph the slight damage it has. It's only cosmetic and does not interfere with its functionality.

2. There is also a very small ding to the scope bell. It took a bit of the finish off but I cannot tell that it is dented in. It appears to only be surface.

3. It also looks like the the objective lens has a very small scratch that runs horizontally. I just noticed that right now while photographing it. I do not think I have ever noticed it before while looking through it.

I am asking $1,750.00 plus shipping & insurance. I prefer cashier's check, money order, USPS certified check and will ship once funds have cleared and been collected into my account after depositing said check.

I still have factory box and the things that came with it.






**edit to add**

Due to high presence of scammers, I will not message you. If you want this item, you can post here and then YOU MESSAGE ME to avoid a scammer making a fake account that mimics mine and messages you pretending to be me.