Posts

softcock · Dec 28, 2024

Why, what ? , I been seeing this all week ? with the alien gibberish on seeing SHcom search

-
Screen Pic. with Gibberish on 4 different forum titles .

-
Screen Pic. on Search

-

Tperry · Dec 22, 2024

Selling my personal AI AT barrel in 6mm Dasher. Chambered by me. Cut for Lapua brass. Peterson and alpha may work but it's not an alpha specific reamer so I'd stick with Lapua.

It's a Proof blank finished at 25 inches. 7 twist. .274 neck, .120 freebore. About 400 rounds have been fired through this barrel.

Only selling because I shoot Dasher out of my Impact and don't really shoot it out of my AT.

$400 shipped. No trades. Payment with PP f&f or Venmo gift only.

Rbrown42 · Dec 28, 2024

Has anyone noticed a rifle handload smoke? My load is .308 Winchester. My recipe is 38 grns of IMR 3031 pushing 168 grn Sierra Matchking. According to the Lyman 49th Edition Reloading Handbook, starting load is 37 grns and max load is 42 so I'm within my safe perimeters. What got me is the smoke from it. It's smokeless powder after all. That's why I'm here trying to figure out if something may be wrong with that tub of powder. Has anyone on here come across anything like it before? Thanx in advance

watchknut · Dec 28, 2024

Just started long range shooting…today was my 3rd time shooting my new rifle, so much to learn.

I took forum members advice and bought a few types of ammo - 140 Hornady Match, 143 ELD, 144 Berger, and 147 Hornady Match.

Today I did some testing.

I did the box test at 100 yards…well part of it, and it seemed to work well (used the remaining 140gr)

Then I tested 5 shot groups…first was 143gr

Then the 144gr Berger

Then the 147gr

After this I set up to the farthest distance I could on the land…338 yards. After some trial and error, as it appeared that my muzzle velocity measurement was incorrect, causing a .2 MRAD error, I seemed to somewhat dial it in better.

Questions:

Looks like my rifle likes heavier bullets, what is other good factory ammo to try?

At 338 yards I was a 15x power, does that seem right? Is there a rule of thumb for a the right amount of power at specific distances?

Any insight is greatly appreciated, as I want to tighten everything up.

J. W. · Dec 12, 2024

Was given a Yamaha Rhino 700 FI that has been sitting in the weather and hasn’t been run in several years. I was told that when it was last run, the engine cranked fine, but would die when put into gear.

Trying to get the engine to crank, but no success yet.

What I’ve done so far (not much):

I replaced the ignition switch (key was lost).
I siphoned out the tank and put in fresh gas.
Battery is long since dead, but using my jeep as a jump, the starter turns and the coil seems good. It had decent spark when I pulled the plug and checked it. I changed the plug to new NGK anyway since I already had the original one out.

Piston is not seized. It has compression, but I don’t have a compression test kit handy to know how many psi. I don’t suspect any issues there anyway though.

I pulled the fuel hose off the fuel rail and checked for fuel flow. It spurts upon turning the key on and also when trying to start.

I did not pull the injector yet because it was getting dark before I got to that point. It could be that the injector is clogged or that there’s a problem on the electrical side (fuse or relay?), I guess.

I did notice that squirrels or rats or something have chewed the wires off what looks like an air temp sensor on the intake right before the throttle body. I assume it would still crank without that, but I’m not 100% sure.

Any shadetree (or pro) mechanics in the Hide? Would love to hear any other ideas on how to get this thing running.

These machines are old tech now in the side x side world and getting info on these things is kind of difficult.

Tperry · Dec 22, 2024

Brand new in the package Badger Ordinance M4 bottom metal. For XM3 clone builds.

This is in the white and comes with action screws.

What you see is what you get. This does not fit an M5 inlet.

$250 shipped firm. PP f&f or Venmo gift only. No trades.

TGH89 · Dec 16, 2024

Remington 700 tactical, 223, 20” threaded barrel, threaded bolt handle, factory Remington trigger, tactical bolt knob, Nightforce scope base, weaver tactical illuminated scope, Magpul hunter stock, magpul bipod, magpul dbm, mdt acis mag, rifle is cerakoted burnt bronze and stock is mil spec od green. 211 rounds through it, mostly green tip. Not looking to separate at this time. ~~$1500,00~~ ~~$1250.00~~ $1150.00 shipped.

Zak Smith · Jan 23, 2006

I thought I posted this here last year, but I couldn't find the thread to update it. The first match of 2006 is coming up in two weeks, Feb 5th.

https://sportingriflematch.com/
https://sportingriflematch.com/
https://sportingriflematch.com/

<span style="font-weight: bold">The
Sporting Rifle Match
"First Sunday JAN-SEPT"
NRA Whittington Center, Raton, NM</span>

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">
PURPOSE
The "Sporting Rifle Match" at the NRA Whittington Center in Raton NM is designed to test a rifleman's skills shooting small targets from approximately 175 to 700 yards in the natural terrain, with what he can carry throughout the course. (The "Sporting Rifle Match" has nothing to do with NRA High Power "Sporting Rifle" class.)

The match format is 10 stages spread over a 2 mile distance. Each stage has 6 targets at varying distances to be engaged with only one shot each. Target distances are known to the shooter. There is no time limit, but the shooter must finish within a reasonable period of time. No "sighter shots" allowed. Score is total number of hits out of 60 possible. No one has shot a perfect score, yet.

Match entry is $25. There is partial cash payback to winner(s) based on the match turnout. The balance of fees goes to the NRA WC.

Typical equipment used includes: a rifle capable of 1 MOA accuracy; rifle optics allowing precise hold-over for small targets from 175 - 700 yards; binoculars to spot for other shooters; and a backpack to carry water, ammunition, and a couple power bars.

SCHEDULE
Each match takes place on Sunday.
SATURDAY 1100-1200: Range Officers and anyone else willing to help, show up to set, repair, and paint targets.
SATURDAY 1400-1500: Sight-in stage open for use after target work is completed.
SATURDAY 1700: Sight-in stage closes for the day, range is locked.

SUNDAY 0700: Sight-in stage opens for approx 30 minutes
SUNDAY 0730: Shooters' meeting, and match begins.
SUNDAY 1300-1400: Match finishes, payout to winners, and targets are put down.

Match cancellations will be announced on this web page ASAP before the match, ideally by Friday morning, but it could be as late as Saturday afternoon for a last-minute emergency. So... CHECK THIS WEB PAGE FOR POSSIBLE CANCELLATION ANNOUNCEMENT BEFORE LEAVING.

2006 SCHEDULE

* Sunday February 5th
* Sunday March 5th
* Sunday April 2nd
* Sunday May 7th
* Sunday June 4th
* Sunday July 9th
* Sunday August 6th (TBD)
* Sunday September 3rd

</div></div>Rules and complete details on the web-site.

https://sportingriflematch.com/
https://sportingriflematch.com/
https://sportingriflematch.com/

Jakeweb09 · Nov 3, 2024

I’ve got a manners prs2 bedded for a medium lone peak fuzion. M5 inlet. Bedding looks great. Not sure on which camo pattern this is. It’s 52 oz on my kitchen scale as is. Few oz lighter without rail.
$800shipped without rail
$850 shipped with rail.

Would trade for rimx action, lightweight double pull, kifaru ARK frame, Berger .257 135s, CPS primer tool, Henderson trimmer..I’m open to other offers

Chipperzs · Dec 28, 2024

MDT Triple Pull Ckye-Pod, Gen 2, Really Right Stuff BTC-Pro Bipod Clamp Left Hand side. I'm the original owner. I bought it 2 years ago and added the SAP Ckye-Pod Quick Adjust Lever to it. It's been used in a few matches but has very little wear on the feet and only a few scuffs on the grip tape on the legs.

$850+Shipping

Message me if interested and I can send additional photos if needed via txt. -Lou

Bratcher02 · Dec 28, 2024

Pulsar thermion xp38 unit with 2 extra batteries all factory stuff and box $2750 obo shipped call or text 812-556-9763 I can send videos or more pictures if you would like everything works perfect no issues

BigPineyTradingPost · Dec 23, 2019

Just wondering if any Formula 1 racing fans on here? Who’s your favorite driver, team or both?

Locapitano · Dec 28, 2024

Been lurking the forums for a couple years but just started posting now. Figured I’d say hi and officially come out from the shadows. I shoot mostly .223 and 6.5CM. Built a few sub moa AR’s and recently started reloading in both calibers. Here mostly for the enormous amount of reloading knowledge and expertise. Hoping some of it will rub off on me.

Copechristie · Dec 28, 2024

Arc m brace 10 Moa $200 or trade for 34mm one piece mount

35mm vortex low $75

J_myer · Dec 28, 2024

Looking for a Ckye pod single pull standard length (preferably). Any condition. Arca head.

Alex Sniper · Dec 28, 2024

Once fired used brass. Feel free to message me if interested. I can ship anywhere in the Cont US.

Mean_Man · Dec 26, 2024

Is there some difference between these two besides one looks slightly longer and one has a little more material removed from the standard lugs of 1913 pic rail…

Nightforce Standard Duty 1-Piece 20 MOA Picatinny-Style Scope Base

Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle. These aluminum...

www.midwayusa.com

Nightforce 1-Piece 20 MOA Picatinny-Style Scope Base Remington 700

Designed to exceed Military specifications, these steel mounts from Nightforce are tested for unfailing, repeatable performance. Bases are constructed...

www.midwayusa.com

They’re both short action knight force scope bases for a Remington 700 pattern, looking to order over of these two for my CZ600 Range but asking myself why the heck ones is basically $60 and ones $130???? And can that little bit longer be useful or needed somehow?

Rodney65 · Dec 18, 2024

Sorry in advance for asking something so basic but it would save me a lot of scouring the internet.

I am planning on purchasing a T3X Lite in .223 with a 22" 1:8 barrel for coyote hunting and target shooting. I have seen people get great accuracy out of T3X Lite contour barrels with a slow cadence of fire. Max mag length will be 2.44".

I am looking for a bullet and powder combination that is easy to load for (I don't want to chase the lands), is economical, and has decent terminal effects for predator control. I had initially planned to use 69gr SMKs but I am not seeing a lot of love for them online.

Bullets available to me in bulk in my price range include:

Sierre 69gr SMK
Sierra 77gr SMK
Sierra 77gr TMK
Hornady 75gr ELD-M
Hornady 73gr ELD-M

There are also lots of lighter bullets but I wasn't sure they would work as well in wind, in a 1:8, or in wind although I am far from an expert (obviously.) They include 52gr ELD-M, 55gr SMK, and 60gr TMK among others.

Powder available here is a bit limited with CFE 223 and Varget being what I think would work best. I plan to use Remington 7 1/2 primers.

snowplow · Dec 23, 2024

Hey guys, does anyone know if you can get custom turrets for the Fullfield IV? I've read some contradictory things on the website and now I'm not sure.

warterballer · Aug 5, 2024

KRG TRG 22/42 Folding Buttstock. BNIB. $650 shipped

jbug2020 · Dec 28, 2024

I have a slightly used PWS MK114 Mod 2-M upper receiver. I have somewhere around 250 rounds through this upper. Its a very accurate upper and likes 69gr and 77gr ammo. I painted the upper with Brownell's Aluma Hyde FDE paint.

Asking $750 Shipped
No trades please

Sub-MOA Accuracy Guarantee: Experience Sub-MOA accuracy with high-grade ammo, thanks to our Boise made precision barrels.
PWS Long Stroke Piston System: Renowned for reliability and reduced fouling, with adjustable gas settings for optimal performance.
Suppressor Optimized: Provides enhanced suppressor performance by minimizing back pressure, reducing gas blowback, and optimizing gas flow for a cleaner and more comfortable shooting experience.
.223 Wylde Chambering: Meticulously designed for outstanding accuracy and reliability, accommodating both .223 Remington and 5.56mm NATO.
Muzzle: Threaded 1/2-28 for compensators, muzzle brakes, suppressors and suppressor mounts (sold seperately on this specific upper - no devices included.)
Innovative PicLok™ Handguard: Combining both Picatinny and MLOK into one for mounting accessories, balancing ergonomics and functionality.
Radian Raptor™ Ambidextrous Charging Handle: Ensures smooth operation for both left and right-handed shooters.
The PWS VOW: Our warranty for all PWS products, guaranteeing repair or replacement for any defects or issues, ensuring your complete satisfaction.

roostercogburn98 · Dec 18, 2024

Title says it all, 10x J Unertl scope, 1 inch tube with later production black mounts, both lens caps. One small booger on a screw for the adjustable crosshair ring, does not affect function, still loosens and rotates as needed. I can get pics of the crosshairs if you want. Bought a few for a project and this one didn’t make the cut. I’m asking 800 shipped, but make me a reasonable offer. Might be interested in a trade, not sure what I’d want so just ask. PP F&F or you cover fees, USPS money order, or face to face if close enough. Thanks

SkyScrapin · Jan 18, 2024

Soldier Systems just announced Envision's latest product offering available to the commercial market place -- MARSc. Strictly Offensive Kit is excited to finally be able to talk about publicly since it's been in development & testing as long or longer than the MARS-Lc.

MARSc, like MARS-Lc, includes onboard ballistics, a 1550nm LRF, environmental sensors, etc., but now also incorporates a VCSEL NIR Illuminator & Laser. The Illuminator has a cleverly positioned NIR adjustment lever which takes minimal adjustment to dial the beam divergence.

Similar to what end-users experience with the MAWL-C1+, this unit provides a CLEAN edge-to-edge NIR illumination that can support extended range capability for end-users running I2 Clip-Ons such as the PVS-30, -27, or M2124-LR, as example.

We have a Youtube video that will release on the opening day of SHOT which we will post up here.

Product Link.

Availability is March/April.

More details to come.

Preston

@wigwamitus

Saurus · Dec 19, 2024

Standard RCBS dies (full length) and an RCBS Matchmaster die for 300 RUM. Changed the rifle to a 300 PRC I so have no use for these any longer. $60 for both, shipped. Or, $35 for the standard dies, shipped. And, $50 for the Matchmaster die, shipped.

DontShootEnough · Dec 25, 2024

Hide,

My dad recently purchased a Walther PDP, 5 inch, compact and was hoping to run a Safariland ALS without a light. It looks like Safariland doesn’t make an ALS for that model without a light. I reached out to RDR gear as I know they make some minor Safariland mods, but haven’t heard back.

My concern would be sloppiness or issues if the holster indexes off the light. He is running a red dot.

Would love any ideas.

Thanks!!

Having trouble using the site?

Contest: Show Us Your Winter Gear!

Posts

Posts

Filter

Maggie’s Curious SHcom Pic. on search engine

SOLD AI AT barrel 6mm Dasher

Attachments

SOLD Badger Ordnance M4 Remington 700 XM3 bottom metal

Attachments

SOLD WTS: Remington 700 223 Tactical

Attachments

SOLD Manners PRS2 medium LP fuzion

SOLD MDT Triple Pul CKYE-Pod with SAP Quick Adjust Lever

Attachments

Optics Pulsar thermion xp38

Attachments

Accessories Arc 36mm vortex 35 mm

Attachments

SOLD MDT Ckye Pod

Reloading Equipment WTS Once fired used brass

Attachments

SOLD TRG Folding Buttstock

Attachments

SOLD PWS MK114 Mod 2-M Upper

Attachments

Optics J Unertl externally adjustable scope

Rifle Scopes 💥2024 Just Announced💥 MARSc - Onboard VCSEL NIR Illum & Laser

Accessories 300 RUM Dies

Attachments