Anyone running this scanner coyote hunting? Most reviews are non US with limited video and mostly talking specs. My only scanning experience is with a Pulsar XP50. The pulsar is pretty nice but big and bulky. Actual in field hunting experience is appreciated.

It’s a MPA barreled action 6.5 Creedmoor with a Curtis Valor RH 24" M24 1:8 twist black action with polished barrel threaded 5/8-24 with an Area 419 Hellfire 4 port self timing muzzle break with the Hell Fire universal adapter. Also, it has an Integral 20 MOA Scope Rail. It has a Trigger Tech Diamond two stage flat trigger.

• Accepts AI and AW magazines (will not work with BDL style floorplate)

Lastly, one AICS magazine with mag extender.

It sits in a Matrix Gen 1 Chassis with OD Green in a two color distressed. It has a standard night vision bridge.

The Chassis comes with:

• The stock has a first grip with a Swept 4 and a second grip with a vertical 3. Also, it has Left and right Handed Trigger Finger Supports and Left and right Handed Thumb Shelfs.
• Built In Inclinometer leveling system
• Two competition side rails installed
• 4 MPA side rail weights by Gray Ops with two installed
• Magwell plate installed
• Two round holder
• V4 Spigot mount Picatinny/Arca rail

MPA speed nut for cheek rest



Breakdown of how rifle has been used. The Action Barrel has less than 100 rounds through it. The chassis has minor wear on bottom side due to using the chassis for my Vudoo 360 22 NRL competition - 3 matches with the Chassis. You won’t be disappointed with this rifle. It’s competition ready. All you need is a scope.



I’m asking $2800+FFL/Insurance

Haha look at his face

Login to view embedded media

Very good condition, no packaging, $110 shipped

Working on a NSW Recce build and just got the barrel I ordered from Lilja. I ordered their 15.1" M4 Recce profile barrel in .223 Wylde. Shipping was lightning fast but king of disappointed when I opened the package. The barrel itself looks to be very nice but the M4 extension is one of the roughest I've ever seen.

- The M4 feed ramps aren’t centered (see the blue circles on the pic)
- There is material behind the lugs still (see red arrows)
- The chamfer around the lugs is off center
- Generally poor machining, seems unfinished, especially around the feed ramps. (see the green circles)

I reached out to Lilja and they pretty much acknowledged the problems and said that they switched to new style of machining this spring and that I had one of the old M4 extensions. They said go ahead and install it and see if you have any issues...that just doesn't sit well with me. For a $575 barrel, one should expect better. I asked to return the barrel and have a newer M4 extension installed on it, still waiting to hear back.

Has anyone else had any issues with Lilja barrels, specifically the M4 extension? If they are unwilling to resolve the issue, I will be looking into other options. Any recommendations out there? I know Craddock has a few options and a great reputation.

Like new action wrench for the 3 lug Curtis Axiom actions. $90 shipped, pp ff, check or m/o. No trades.

Like new CPS with small and large tubes, $625 shipped
Sold

I have 330 pieces of Lapua brass that have an estimated 13-15 firings on them, these were annealed on an Amp each time. Most have already been through the Amp again and ready to be tumbled/worked. Some extra pieces are included. $150 shipped.

New brass sold…

Redding 6.5x47 comp dies, 58479, $185 shipped.

6.5mm;

Berger 140gr hybrids, 500ct box, 26714. Have 3 boxes, all same lot #. $275 shipped per 500. No break on these due to the weight.

Hornady 140gr ELDMs 26331, 500ct pack of 100ct boxes, same lot number. I have 2-500ct sleeves left. $225 shipped per 500.

.22 cal;

Nosler CC 69gr hpbt, 65823, 1000ct box, have 2 boxes. $190 shipped each.

Nosler CC 69gr hpbt, 53065, 250ct box, have 7 of these. $475 shipped for all 7.

Hornady 75gr ELDm, 22791, 100ct box, have 23 of these. $170 shipped per 5 box sleeve.

Sierra 77gr hpbt, 9377, 500ct box, have 1 of these. $175 shipped.

Sierra 69gr hpbt, 1380, 100ct box, have 24 of these. $170 shipped per 5 box sleeve.

Berger 70gr VLD, 22413, 100ct box, have 5 of these. $165 shipped for all 5

Berger 77gr otm, 22101, 100ct box, have 2 of these. $70 shipped for both

Barnes 70gr tsx, 22470, 50ct box, have 3 of these. $90 shipped for 3. The 4th box is open, will count them and update when able.

No offers, PP f&f, check or m/o, will clear first. Prefer a check.

Title

200-600 knights rear sights
USMC stamped.

$75 per sight (shipped)
$65 per when purchasing 10 or more (buyer pays shipping)

Condition is used but good.

I bought this watch off here last year and absolutely love everything about it except the size, it just looks too small on me seeing as I’m a pretty big guy.

Would love to trade it for a Sinn U1 or maybe another larger self winding watch or possibly toward 9mm pistols such as walther steel PDP 5”, Dan Wesson DWX, CZ p10 competition???? Throw me some
Offers.

Would sell for $1800 dropped to $1750 CONUS.

Here is the original ad from here where I bought it. Comes with everything that is in the original ad.

Burris XTR II 1-5x24mm LPVO. 30mm tube, Ballistic CQ MIL Illuminated Reticle. Matte Black, Burris Item# 201001
Includes flip up scope caps and throw lever as from Burris with original papers and box. Great Glass!
Condition is excellent with no dings, dents, scratches or ring marks.

I have two of these to sell. Both same, same as described above.

$375 $450 ea. OBO Shipped UPS / PayPal FF

Like new. Gray Ops 34mm precision mount
1.260 height. 0 cant
Long pic rail diving board & bubble level
Sold

Greeting from France,

I'm planning a trip to Texas this summer to experience real freedom, and I’d like to bring one of my bolt. While going through the ATF Form 6NIA, I came across a dilemma: it seems that I must be participating in a competition to qualify under the rules (see below).

I've tried searching online for good ELR/LR ranges in Texas, but I haven't found any upcoming competitions or events. How can I apply to one? I'd love to meet the long-range shooting community there, but it seems difficult to find relevant events even online.

Here’s the part of the form that concerns me:

"Do you possess an invitation and/or registration to attend an upcoming competitive target shooting event or sports or hunting trade show in the United States sponsored by a national, state, or local organization devoted to the collection, competitive use, or other sporting use of firearms?"

Click to expand...

If I answer No, it seems I wouldn’t be in compliance with 18 U.S.C. § 922(g)(5)(B) and therefore wouldn't qualify for an approved ATF Form 6NIA (5330.3D) temporary import permit. (For additional information, they suggest calling 304-616-4550.)

Does anyone have experience with this process? Any recommendations for competitions or events I could register for?

Thanks in advance!

Have heard from a feller on here that the ZCO ocular might not work with the TriggerCam 2.1.

If you have tried it, please comment here on your findings.

Hey fellas and gals, this is my first real post although I did the new member intro thread. I've run into an issue with the scope in my thread title. It is a mid 90's abomination of mil reticle and MOA adjustments. What can I say, I didn't know much about LR shooting and was in the process of learning it from TFTT/DAG, as well as, nothing otherwise that myself or my "armorer" knew of, was really available back then.

It's a good scope and has gotten me to 900-1000 but after coming back from the range where I was shooting in and zeroing my AI chassis, I went to slip the elevation turret to the zero mark but it won't slip. It won't turn without clicking, whereas the windage turret slips smooth as silk like it is supposed to. The rifle did take a short slow, sliding drop onto the tile, maybe a foot or so. It landed on the side focus knob but could have hit the elevation turret as well. This occurred since the last time I shot the rifle. It seemed fine with no apparent issues, not even a mark on the scope. I know these things are known to be pretty tough but maybe it knocked the turret housing out of whack so that it is binding, I don't know. I was thinking about giving a couple taps with a dead blow hammer and try to get it slipping freely. Anyone had this issue or got any smithing scoop? Send it back to Leupy for repair? Not that it probably matters but the rifle is a early 90's Remington 700 PSS .308. Thanks for any input.

1. Magnification Range 13-26 or 12-24.
2. 16 inches long so you never have to touch paralax.
3. 10 mil turrets.
4. Says Nightforce on the side so you can actually trust it.

I never dial below 13x or above 24x in a PRS match and I shoot a lot of them. Drives me nuts that so many scopes that are obviously targeted at long distance shooting go down to 4-7x on the low end. Not to mention they are all FFP and that makes it impossible to pick reticle thickness that is usable over the whole range.

Stupid 15 mil turrets on high end scopes with tiny little lines that make it hard to tell which click you are on. Tangent Theta has a gigantic turret and most of the space on the dial is just empty space because they use tiny numbers.

Nightforce hasn't released any new top end optic in awhile. I'm sure they won't release this, but it'd be sweet if they did.

Interested in selling or trading my AIAX in 308 with Nightforce NX8 4-32 F1 Mil-XT.

20" barrel, non quick lock, less than 1k rounds down the pipe. Shoots great with just about everything I've tried.

I specifically want dual NV. BNVD-SG, ARNVG, 1431's RNVG etc. WP or GP, prefer manual gain and autogated.

Package $5500 in trade

Will also sell -

Rifle - $3500 shipped
Comes with one 10 rd mag, AI buttspike, extra LOP spacers and 3 rail sections. Will ship in a cheap hard case from my FFL to yours unless you're a TX resident and we FTF.

NX8 - $1900 shipped with NF mount. Have the box somewhere. Rifle must sell first.

Have the three above for sale. OG Geissele MK4 10" in DDC, can see inspction date was 18', in like new condition. Hodge P-lock has a nic near the lock nut, can be seen on the left side, other wise new and never mounted. In good condition Geissele 14.5 HK SMR, does not come with barrel nut. Both geissele are NOT BLEM.
$275 for the mk4, $230 for the Hodge, and $385 for the HK SMR.

Will accept Paypal F&F, Zelle, USPS MO, and Check (ship when clear). Buyer pays actual shipping charges.

Looking for a stock for a Remington 700 short action. Varmint profile barrel channel, BDL bottom Metal (or M5 if it comes with the BM). Think HS precision takeoff from a 700P/5R or McMillan HTG, etc. Not looking for anything fancy, painted is fine (though an AICS 1.5 fixed would be sweet). If you’ve got something lying around not being used let me know. FOUND!

Login to view embedded media
By help I mean beat the fuck out of , and then threatened witnesses and attorneys.


And they gave a 69 year old disabled veteran a curb stomping because - his truck was parked in one place for to long . And having junk in his yard .
Fucking disgusting.

Im
Not picky. Just looking for 20 cal 9 twist blank.

Thanks!

Selling a Tikka T3/T3x 22 Creedmoor barrel

Shilen 9 twist, it's their #7 profile but I turned the shank down to match the Tikka action. Muzzle diameter is .875. 22 inches long. 5/8x24 muzzle threads.

Barrel work and chambering done by me.

Cerakoted black by my awesome wife.

Round count is exactly 39. It shot very well with 53gr Vmaxes. I was getting about 1/2 MOA 5 shot groups. Shot one 10 shot group with it that was just over 1/2 MOA.

The only reason I'm selling is to go to a lighter profile since this is for a hunting rifle.

500 shipped, now only 350!

Venmo gift or zelle. No PayPal. Mine is frozen.

No trades.

Hello I had a couple questions I could not quite find online or this forum. I am going to build a 338 Lapua mag.

I am planning on using a defiance deviant tactical action ordered from defiance a mpa matrix pro 2 and a brux 9 twist barrel.

Does anyone have any experience with this action and set up in 338lm and will it feed from a cip 3.850 magazine if I load 300gr Berger elite hunter's or otm ?

Any thoughts on a 9 twist barrel ?

Looking at data it looks like oal of these cartridges will be 3.650 so I think all cip mags will take a 3.750 cartridge?

Thanks

360 Degree Precision weighted ARCA rails for sale
All in excellent condition
Choose from:

• Steel with brass inserts; with three fastener locations for Manners / universal fitment. Includes new tee nut hardware. 14.25" OAL
• Steel with brass inserts; fasteners slots to align with Foundation inlet slotted forend rail or RRS Dovetail. Includes fasteners. 13.75" OAL SOLD
• Steel (solid) with fastener slots to align with Foundation inset forend slotted rail or RRS Dovetail. Includes fasteners. 13.75" OAL

$135.00 each shipped to CONUS
View attachment 8643273View attachment 8643274

Mag length is about 3.75" on TRG 42's. Is it worth it to do a 338 Lapua improved at around mag length?
Or should I just resign myself to single feeding?