Kinda just a hodge podge of Rimfire Targets I used at the house for practice but have since quit rimfire all together and cleaning some stuff out......1st is from JC Steel is the KYL Racks with 2 racks and 4 Targets (1/4", 1/2" 3/4" and 1") all break down to small package also from JC is 2 double Hangers with a 1", 2- 2", 2 1/2" 3" targets and then 4 A&J spikes and single holders with a 5 and 6" circles and the a 4 and 6 inch square .......figured up new would be 300 bucks or so will sell for 170 shipped (basically half price and then 20 bucks to ship)

Ordered this and upgraded to a rim-x and then received the barrel.

So don’t have anything for this to go on.

Asking $425 shipped

Vortex Razor Gen III 1-10x24 with EBR-7 (MRAD) reticle. Includes a Switchview throw lever, box and paperwork. There is a small dent on the top that looks worse than it is, but you can feel it when you run a finger over it. It doesn’t affect function, and it could be covered by a scope mount so you would never know it was there. $1525 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-Modbutton Lite (SF Plug)
-Scalarworks Leap 08 (30mm/1.57”)
-Surefire Scout QD Mount (Larue/ADM)
-Radiant Raptor, Griffin SNACH, FCD ACH

I'm seeing a weird result out of Cold Bore. 1st I'm no novice when it comes to Ballistics but this is weird. I enter the posted G7 BC for the 225ELDM..391
Enter my chronyd MV of 2808fps.
My zero conditions & field conditions & Cold Bore predicts 14.3mil @ 1470yds.
However Streloc Pro says 13.7mil as does the new AB app. All using exactly the same inputs.
I fire 5 rnds @ 14.3 & hit .6 high. Dial to 13.7 & I'm on with the next 5 rnds.
I can't drop the DK low enough but if I use a G7 of .440 in CB it lines up.

I have tried to search this topic but was not able to find posts, if I missed, my apologies in advance.
I started to shoot .223 Rem (paper for accuracy only) and wondered when the barrel is too hot. How do you determine what is too hot and what is acceptable?
I am using a Zermatt TL3 with a 26" Shilen with a barrel, 1:9 twist. I currently only use starting loads with CFE223 (23.8 gr) and Hornady 62 gr ELD-VT.
I shoot 10 rds and let it cool off a bit before I shoot 4 to 6 five round groups.
I plan to try my Raytek Autopro next time (used it to check engine temps in my aircooled cars). It will tell me the surface temperature of the barrel. Once I know what that is, I have to decide what is too hot and what is not. Is this a good idea and what is the acceptable temperature range? Thanks for your suggestions.

Looking for a Schmidt Bender 4-16x42, double turn or locking turret model preferred but single ok. Any reticle considered.

PM to discuss thanks!

New rifle teardown, unfired, short action bolt stop. Includes trigger. Zelle or USPS MO, no offers or trades please. $590 shipped USPS insured from private party to your FFL.

Has anyone considered and avoided, or purchased and regretted IOR's tactical line of optics because of the reticles offered?
I know the brand, and Val have had issues in the past, and that may or may not be rectified, but my specific question today is regarding their reticles.

To preface this, I have had and currently have some great glass in my stable, Tangent, Razor II, Razor III, MK5, ATACR and the 5-42 March High Master....BUT
I keep wanting to pull the trigger on some offerings from IOR... most notably



However, their website is poor (wrong photos for the wrong optic description), their info and specs on the reticles they do offer is lack luster, and the pictures and descriptions of the reticles are just down right BAD, or not even shown.

This MP8 Extreme X1 appears to be their pinnacle...but the image associated with it is poor at best when you compare it to the full detail and actual vector display provided by most manufacturers like Nightforce with their MilXT

Anyone care to voice their opinions? I've even gone as far as to contact Valdada and request photos through the optic to get an actual representation of the reticle, but was denied.
I'm to the point where I'm actually designing (finalizing) my own reticle. (i was a designer in college) Since they build them to order anyway...I'm wondering if they would even entertain a custom for me.


Apparently they have a GAP reticle as well...(not even listed on their link of available reticles) but the jpeg they use to showcase it is washed out and hard to read.


The Nightforce Mil-XT for comparison. All reticle details are well displayed on the website...as anyone would expect from a premier manufacturer like NF.

I’m sure this has been discussed and I’ve read a few posts regarding it but they seem to be older.

We are in the process of getting new scopes for our swat rifles (700p in 308). Realistically any engagement we have is under 100 yards (not there couldn’t be something longer, but historically very short distance).

I shoot prs, and am a FFP guy. However , FOV is super important as well as making shots at lower power and actually being able to see the reticle (low light or dark backgrounds). Most of my shots are taken at 4-6x, but I like having the ability to zoom in if needed. I need to have the ability to have a wide fov to see a large area while I’m at 65-80 yards away. we almost always dial, and Christmas tree type reticles are really not needed.

I’m leaning towards a 2-10x in SFP just for fov, I’d like to be at the 3-15x , but the fov at lower power is much more limited .

I’ve seen the nf nxs 2-10, as well as 3-15. Both are sfp. Leupold doesn’t seem to offer anything in their tactical line with sfp. I have shot Burris xtr3s, but its ffp and the reticle is super thin.

Our team leader is big (won’t budge) on buying American products.

Any advice?

Anyone have experience between the two? Looking for the best low light optic I can get that has the build quality, turrets, etc as these two.
Not sure if there is something better….but I can get an Ultra Bright for about $2600 right now, but the Polar is still at that $4k.

Looking to sell my grayops bag stop, this is the longer version, i modified the back so it would sit further back on a masterpiece arms ba comp chassis. Does not affect its performance.

Looking for $65 shipped, payment via PayPal f&f or zelle. Sold!!

I am looking to complete the paperwork on a form for free suppressor from an individual to an individual in the same state. Upon going to fill out the e-file form it is asking for a FFL or SOT information and will not let me get past the first page. It is my understanding that if you're in the same state you're allowed to do a transfer directly to another individual. Is there something that I'm missing or do I just skip that first page.

Second ever bedding job on a kelbly action. When I pressed the action into the marine Tex a little bit oozed up around the bolt release. I have good release agent in there, but I’m trying to decide if I should try and wipe it out before it dries or if that will just just push it further in and cause problems. I haven’t touched it or moved it yet. Thoughts?

Galaco rifle scabbard

As new, used to display a rifle............a few minor "scuffs, bruises".................new list price $475................

$350.00 shipped............

Rifle Scabbard

Designed for lever-action carbines in 18†and 20†barrel lengths, the Rifle Scabbard is constructed of 12-13 ounce premium saddle leather. A hand-rubbed oil finish brings out the natural beauty and luster of the tan leather.

www.galcogunleather.com

I’m sure there’s someone on this site that could point me in the right direction. I’m looking to sell an old colt 1911 from what I can find it’s a 1929 first year production, chambered in 38 super auto. I’m debating putting it on an auction site, trying to get an idea of the value. Any help would be great. Thank you

I have a brand new pair of Walsh Custom Defense mag holsters. These were custom made to fit MDT's XM mag. They have Tek-Lok clips installed.

I ended up going a different route with the build and will no longer need these.

They are OD Green carbon fiber

$50 for 1
$90 for both.

Prices are shipped.

No trades at this time please. Thank you.

I have 2 pairs of Walsh Custom Defense short action mag holsters.

They have mounting holes drilled for Tek Lok clips as well as standard belt clips. They will come with both.

2 are black carbon fiber
2 are blue carbon fiber

$50 for 1
$90 for 2
$175 for 4

All prices are shipped.

No trades at this time please. Thank you.

Have a used but in great shape set of Vortex rings. They are 30mm tube and .87 in high. $115 shipped

Used but in great condition. Comes with all the inserts, wrench and 128 Gb card. Just don't use it much anymore.
$475 shipped.

$79.99 for 1000 ct

Thanks for looking. Please post “I’ll take it” with the item you want following that up WITH AN EMAIL to my hotmail.com email address (I have the same username as I do here). PLEASE DO NOT PM. I DO NOT CHECK PM's SEND A EMAIL

Please feel free to email me instead of posting here with any questions, I will respond via email only



3A.[#2433] Virgin Knights Armament KAC SR-15 E3 Upper Receiver, Stripped. These are part of small handful of KAC stripped Upper Receivers that were recently released. These uppers have not been assembled on complete rifles or even complete upper receiver assemblies, so they are therefore referred to as “virgin”. They are engraved with the KAC shield on the upper tang under where the rear sight will mount. $325 shipped SPF





4A.[#2912] RARE Knights Armament KAC Modular Floating RAS II P/N: 21102. Labeled "RAZ II". Similar to the equally rare and hard to find KAC Modular Floating RAS P/N: 20071, but it has a removable top rail section for mounting an Insight AN/PEQ-2A. This is one of the rarest KAC rail systems and few people even know it exists. This rail was NEVER commercially produced or ever made available to the public. This is a once in a lifetime opportunity that will not present itself again. This rail is Vero Beach marked. New, includes 3 x KAC 11 Rib Rail Panel Covers. Does not include the rear clamp and bolt (similar to the bolt and clamp on any KAC Rear Sight or RAS II). I’m interested in trade possibilities (+/- cash) for other rare Knights Armament rifles and rare accessories. $850 shipped






4D.[#2690] Knights Armament KAC FF RAS SR-15/16 Medium Length P/N: 99166/20214. Factory new, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted and long-awaited current limited production of the now legendary KAC Medium Free Float RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your mini-recce or custom build. The value of these rails soared to as much as $750+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. $350 shipped each (a couple available)




4E.[#2992] Knights Armament KAC FF RAS SR-15/16 Carbine Length P/N: 20011. Factory new, includes 3 x KAC 11 Rib Rail Covers. Until now these were extremely hard to find, and were in high demand for building an original early JSOC rifle. This is the highly coveted and long-awaited current limited production of the now legendary KAC Carbine Free Float RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your JSOC or custom build. The value of these rails soared to as much as $750+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. Includes 3 x KAC 11 Rib Rail Covers. $350 shipped each (a few available)



4G.[#2247] Knights Armament KAC HK 93 H&K Medium RAS P/N: 98067. Factory new KAC HK 93 H&K Medium RAS P/N: 98067, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted and long-awaited current limited production of the now legendary KAC HK 93 RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your HK, PTR, etc. or HK clone. The value of these rails soared to as much as $1000+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. $500 shipped each (a couple available)




4H.[#2159] Knights Armament KAC HK MP5 HK94 HK53 RAS P/N: 97198. Factory NEW KAC HK MP5 RAS, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted KAC HK MP5 RAS. These rails have become even more popular and hard to obtain with the recent release of the German made HK SP5, there is nothing sexier than seeing end results of the combination of these two high end manufacturers on the HK MP5. This rail is perfect for your HK, MKE, ZENITH, Omega, PTR, TSC Machine, TMP Outfitters, RDTS, POF, Vector, Turner, or other MP5 clone. The value of these rails soared to as much as $1000+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance, especially factory NEW. $400 shipped each (a couple available)



7.[#2895] Knights Armament KAC 2 Stage Match Adjustable Trigger P/N: 98032. New. This is the factory adjustable type issued on the most well-known weapon systems. Perfect for an accurate Mk12 Mod 0/1/Holland, MK11 Mod 0/1, M110, M4A1 SOPMOD Block I/II, CQBR Block II, MK18 Mod 0, SDM-R, SAM-R, Recce clone, or SR15, SR25. $200 shipped each (multiple available)





10C.[#2774] Knights Armament KAC URX4 Keymod Flat Panel Kit with Keymod Handstop. Only installed and removed. Custom stippled, extremely labor intensive and professionally done. $65 shipped for the entire set




11.[#2981] Knights Armament KAC URX4 KeyMod 5 Slot Rail Section P/N:30714. Lightly used. $20 shipped each (3 available)


16D.[#2996] Knights Armament KAC URX 3.0 & 3.1 Handstop, 1 Hole, P/N: 30411-BLK, Black. Only installed and removed. These are $35 new, save some money. $25 shipped each


16E.[#2138] Knights Armament KAC URX 3.0 & 3.1 Handstop, 1 Hole, P/N: 30411-TAU. Unused, only installed and removed. $15 shipped each (a couple available)


16F[#2681] Knights Armament KAC URX4 KeyMod Handstop, Taupe P/N: 30795-TAU. Unused, only mounted. $20 shipped each (3 available)


16G.[#2684] Knights Armament KAC URX4 KeyMod Handstop, Black P/N: 30795. Unused, only mounted. $20 shipped each (3 available)


18.[#2867] Knights Armament KAC Bipod Sling Swivel Stud & Nut Assembly P/N: 20288. Lightly used, this is the type that screws into the bottom of your KAC RAS or URX to attach a bipod. $15 shipped each (a few available)






Trades I’m looking for (I can go +/- on my end): I’m always interested in almost anything by Knight's (except Vertical Grips, Rail Panels, RAS) so please let me know what you have especially if it's Knight's.

Looking for the following:

KAC 5.56mm Triple Tap Break TTP P/N: 25683
KAC FSGB Locking Front Folding Sight Gas Block P/N: 21342
KAC 30mm Scope Ring Standard (Medium) Set P/N: 98033, used, painted, and/or ugly works fine for me
KAC Teardrop Winter Trigger Guard P/N: 22512
KAC Ambidextrous Safety Selector - SEMI P/N: 25776 (with the scalloped Safety Section)
KAC HH Buffer (black one with KAC Logo)
KAC Special Run (XMAS Cheer) Upper/Lower Receiver
KAC Special Run (XMAS Cheer) 11.5" SR-15 E3 Dimpled Barrel
KAC Special Run (XMAS Cheer) Light Weight URX II
KAC SR-15 E3 IWS Lower Receiver P/N: 25780 or SR-15 M4/M5 Vero Beach Post Ban Lower
KAC SR-15 Stripped Flat Top Upper Receiver
KAC SR-15 Upper Receivers of all flavors (Mod 0 Legacy, LPR, CQB, Carbine, Mod 1, Mod 2, Etc)
KAC SR-16 E3 CQB 11.5in Upper P/N: 32480

KAC SR-25 URX II Carbine Length 10in P/N: 23107 (has no front sight)
KAC Remington 870 RAS P/N 99143
KAC Remington 870 Top Rail P/N 25129 12.25"
KAC HK G36, and HK G36K RAS
KAC FF RAS SR-15/16 Carbine Length P/N: 20011 (Vero Beach marked)
KAC FF RAS SR-15/16 Medium Length P/N: 99166 (Vero Beach marked)
KAC URX II Carbine Length M4 P/N: 25124
KAC URX III Rifle Length P/N 30005 12.5in
KAC URX II Rifle Length P/N 23258 (Has NO Integral Front Sight) or the P/N 20547 version
KAC FF RAS MRE B (Modular Receiver Extension) P/N: 21166 (Vero Beach marked)
KAC SR-25 FF RAS or URX's (Rifle or Carbine Length)
KAC SR-16 E3 CQB 11.5in Upper P/N: 32480
KAC SR-15 E3 SBR 11.5in FSGB Block I Upper P/N: 30356
SureFire FH762K Flash Hider 7.62mm 3/4"-24 SR-25

KAC SR-15 M4
KAC SR-15 M5
KAC SR-15 Match
KAC SR-25K
KAC SR-25 Battle Rifle
KAC SR-25 Mk11 Carbine
KAC SR-25 Stoner Carbine

PLEASE DO NOT PM, EMAIL ONLY

I’m looking at a number of scope options to put on either a 6.5 LMT MWS 20” auto loader or a 308 Tikka Tact 1 24”.

I currently have an NXS 3.5-15x50 that I moved from the LMT to the Tikka and I’ve been thinking about something with more magnification for the LMT.

Two of the scopes I’m considering are Nightforce. One is a pretty pristine NXS 5.5-22x56 and another is the same but with 50mm objective. Or, I have an option to get a very well used (but not abused) ATACR 5-25x56.

Is there a significant advantage of the ATACR over the NXS? It would cost about $100 more plus the cost of mount/rings with the added wear and tear.

Worth it?

#1 Nightforce NX8 4-32 x 50 MOAR CF2D Reticle, 2nd Focal Plane, 30mm tube, MPN C641. Probably less than 100 rounds on scope. C/W Tenebrex covers, box, throw lever and whatever else they come with new. Not a mark on it that I can see. Its still mounted so its possible there may be faint ring marks once removed. Rings not included. SOLD

#2 Meopta Optika 6 4.5-27 X 50, First Focal RD Reticle, MRAD, 30mm tube, MPN 653595. Great reticle for an all purpose scope. Very visible at low power unlike most FFP optics. Has illumination but not really necessary with this reticle. Nice locking elevation turret with zero stop. Optika 6 are great value and nice glass, not sure you can do better for the $$ This scope may have been mounted but I don't think it was ever used it. $675 shipped

December 7th a date which will live in infamy

For those who served and came home



and those who served and live on forever only in our hearts.



We thank you.

Probably a stupid question and I am good at that.

When Hornady came out with the 7 mm PRC, they pointed out that if you already had a 7 mm Rem Mag or .300 Win Mag, you could swap barrels and even use the same bolt face.

LIke any rifle where you might replace a barrel or trigger assembly, you don't need a 4473 federal transfer. Because those are replacable and not serialized. The receiver is holds the serial number.

So, if you put a 7 PRC barrel on a .300 WM receiver, is it still legally a .300 WM, which is what it was when you bought it and transferred with a Form 4473?

Do you run afoul if you don't file a change of caliber associated with that receiver?

Does it matter? The SOCOM MRAD, which you can buy, has .308 Win, .300 Norma Mag, and .338 Norma Mag barrels and parts. Only one receiver presumably having the serial number.

I try to foresee ways the commies could come at us and worry about crap like this.