Well a couple of you have asked for a build guide for our M40a1 take off stocks. I am building an accurate clone, and learning as I go. I am by no means an expert, but I'm trying to find the right information just like many of you. Please post if it directly pertains to a the topic at hand or better yet just email me so we can keep the information condensed.

Login to view embedded media
If you have any questions feel free to ask.

BNIB Hawkins 1 piece 36mm mount 1.27 height $325 shipped

Want to buy a Mk11 RAS Rail if you have / know of one.

So I recently built a kinda sporterized K31 target rifle (don’t worry, i bought all parts separately, so no K31 where hurt). Last saturday I got to test it and shot a 0.5 MOA group at 300m. Now i kinda want to put a scope on it. The scope should be from the 30s to 60, maximum 1 inch in diameter, shouldn’t have an objective bell and a minimum of 3.5x magnification. I want to mount it with a custom mount to the 11mm rail (where the diopter is mounted now) on the left side of the receiver. Any recommendations?

I have an complete upper receiver that has around 400 rounds on it. This Rainier Arms Ultra Match Mod 2 barrel is extremely accurate and will produce 1/2 moa 5 shot groups with match grade ammo. Barrel has been painted FDE and is very soft shooting with the intermediate gas system. I will list build parts below.
Asking $1000 shipped
No trades please

• Aero Precision upper receiver
• Geissele MK16 DDC 15" handguard
• Rainier Arms Ultra Match Mod 2 Barrel - 16" stainless steel fluted - intermediate gas length - 1/7.5 twist
• Superlative Arms adjustable gas block
• Lantac Enhanced BCG
• Geissele Airborne charging handle
• Area 416 Arcalock mlok dovetail rail
• Slate black FDE rail panels

Removed these from my SBS. Barrel was cut/crowned to 12.5", cerakoted graphite black, had the Vang Comp port system, and gold bead sight installed all done by Vang Comp. Chisel Machining 870 stock still looks new, has RMR mounting plate on top and kick-eez recoil pad, compatible with any Remington 870 as far as I'm aware.

$400 for the barrel
$300 for the stock

Are they decent ?

Not much out there (high end ) barrel wise for 350 legend

Hey guys, a while ago there was a guy on here that was machining a new insert for the front of an AICS Chassis to replace the spigot receiver with a rail section that extended out a few inches.

Anyone have a link? I can’t seem to find it.

My spigot has a little play that is driving me nuts. Also, not interested in the Big Dog mount. I want the unit that requires you drive the pins out and replace the entire piece. Thanks.

For those that are new to (or not acquainted with) the Pit, it can be a rough and tumble place. While not everything is allowed, it is a place for shooting the breeze, expressing opinions on non-shooting related topics, and a place to blow off steam. But lately there seems to be some misunderstandings about what is expected when diving into the Pit. A member wrote this, and I thought it was worth sharing...

"My views on the pit are like that of a rowdy bar...

1) You don't have to drink at the bar, you can always find a Starbucks.

2) If you're new to the bar...you're gonna get fucked with.

3) If you say stupid shit at the bar...you're gonna get fucked with

4) If you think you're better than everyone at the bar...you're gonna get fucked with.

5) If you can give and take a few punches...and laugh about it later...you've earned a seat at the bar.


Essentially, don't walk into the Titty Twister...order a banana daiquiri...then rage quit when people start busting your balls."

You should have a thick skin while venturing into the Pit, but there are rules...play nice.

I've always wondered why the '03 seems to have been so much more popular for use as a match rifle than the 1917(during their heyday: 1910's - 1950's or thereabouts when the Garands and M14's completely took over High Power - Service Rifle, and Model 70's/40X's/etc completely took over High Power - Match Rifle, 3x600, prone, long range prone, etc)?

Is the '03 simply a more inherently accurate rifle(IMO a valid question, because the '03 receiver was WIDELY used in the Mann Device for ammo accuracy testing and whatnot for like 100+ years)? Or was it a case of the '03 simply having sights more conducive to competition/precision in general/etc? Or...??

There were FAR more 1917's produced vs '03s during WW1(along with commercial variants eg: Remington Model 30 & Winchester Model 51 Imperial). And they consequently played a far bigger role in the US war effort than the '03 did, in the 1st world war...esp. if you count the P14.

I ain't aware of any commercial '03 variants(aside from the M1922 and the DCM Sporter if ya wanna count them?)?

TL;dr/summary: why no 1917 National Match Rifles? Why so few custom 1917 target rifles?
(Yes I'm aware of Comfort's winning the '35 Wimbledon Cup w/ a custom .300 H&H 1917 {{and @sirhrmechanic 's amazingly beautiful clone/recreation of said rifle, or was that you, @buffalowinter ?}}.

Regardless - my point/question still stands; the '03 dominated the Nat'l Matches up until the Garand NM and Don McCoy's match conditioned Garands were born.. and the 1917 was perceptively very rarely used in comparison. Why is that?

Thanks in advance gentlemen.
God bless & best regards!

I'm clearing out a bunch of stuff for a new ELR build so here is some of it.

#1: Aero Precision M4E1 Enchanced Pro Series Complete 5.56 AR Upper - 16.3" Cold Hammer Forged Barrel, Pro Series BCG, Mid-Length Gas System, Breach Ambi Charging Handle, Enhanced Handguard.

$650 Shipped (SOLD)


#2: Aero Precision M4E1 Pro Series Complete 5.56 AR Upper - 13.7" Cold Hammer Forged barrel, Pro Series BCG, Mid-Length Gas System, Breach Ambi Charging Handle, R-One MLOK Handguard.

$500 Shipped


Both Uppers are brans new in the box, un-fired. No trades, post here and PM if you want one.

This is a Custom bench rest target BMG. New with 7 test rounds fired. $10,000.00

Built by Doyle Englin of Dixie Guns in Winder GA
Action: Bat Machine .50BMG
Barrel: 36" Lilja 1-15 Twist, 2" OD no taper (thats not a typo, the barrel is a 2.000" OD no taper)
Break: AAC Cyclops Break Adapter
Design: Bedded barrel block with floating action and barrel
Trigger: Remington 700
Base: 40 MOA cant
Stock: Sled style stock designed and built by Doyle Englin
Rests: (included) .50BMG Cobra Magnum rest (two additional rear saddles not pictured)
Weights: Rifle - 53lbs, Front Rest - 42lbs, Rear rest - 16lbs, additional rest parts - 8lbs.

The part of the zermatt origin bolt (firing pin) that connects with the trigger has become loose and I can wiggle it
back and forth and am not sure if/how I'm supposed to tighten it? I'm guessing that hole is
where the set screw is, but I'm not sure if I'm supposed to tighten it while inside the bolt like in the first picture
or remove the firing pin and tighten the screw while not in the bolt like in the second picture? If anyone knows how
I'm supposed to tighten and service the firing pin/bolt let me know.
Thanks,

Ok, ive wanted an Orange Vise for a about 2 years now. I now have a better reason to buy one besides the fact they are awesome. @flyer1a nice work.

Login to view embedded media
Oh and anyone balking at the price, these vises alone direct from Orange are normally around 1300 bucks. So 1150, for this package isnt bad.

Vortex PST Gen II 5-25x50 5257 EBR 2D MRAD FFP 30mm tube.
This is a Gen 2. include vortex bubble level. Was mounted on a Anschutz 22lr.
$525 shipped. or best offer

Has ~60 rounds through it. Built by Bill Tomkins at GAP.

Specs

Action: Surgeon 591
Barrel: Bartlein GAP #7 contour 24" 1:11.25 TW
Stock: Manners T4 multicam cerakote, adjustable comb and versa pod-8 stud
Badger DBM
Jewell Trigger
Surefire 762SSAL/RE Brake

Scope: Schmidt & Bender 5-25x56 Police Marksman II LP P4F

Willing to sell scope separate, but rifle must sell first.

$7000 OBO.

I've got a weaver k 3 on my m1903. I feel like I could do a lot better shooting with a better scope... but then ... it's a m1903. I don't really want sone crazy scope on there. What would be a good scope that would look right on it.

Im on the fence that a leupold 3-9x40 with cds dial would be the best model scope that would look right on it.

Looking for 16-19” DT barrels. Whatcha got??

Vortex Razor 1-6 (non-e model). MOA reticle. Reticle stadia has hash every 4moa. Took this to 613y last week. Aging eyes require more magnification. Excellent condition. Only mark is a scratch on windage cap. Comes with Seekins mount. $950 shipped. Can face time or take a call for inspection / questions. PayPal, Apple Pay or Venmo. Trades for quality MOA optic with more magnification considered. Trijicon RMR adj. type 2 1moa dot also needed.

Guys.....rules. If you have a problem with a listed price, send the seller a PM, or use the report button. If you report something and it doesn’t disappear, take that as confirmation that the item or post is g2g.

Do NOT crap in the thread. I’m tossing out very short bans instead of the normal 1-2 weeks just to get the point across. If it continues, they will be the longer bans.

If someone wants to pay gouged prices, that’s their business.

PWS MK1 MOD 2-M Upper, .223 Wylde, 18" barrel, never fired except from factory.
$1050 shipped CONUS, Zelle or USPS Money Order only.

Trades/partial trades I'm interested in are certain Aimpoints; Surefire pistol lights; Volquartsen 4.5" Black Mamba or Scorpion; HK VP9 threaded barrel; PMM Comp for P365, P365XL, G19 Gen 4.

All items include shipping CONUS. I only accept Zelle or cash, so please do not ask if I'll take any other form of payment. Trades/partial trades I'm interested in are certain Aimpoints; Surefire pistol lights; Volquartsen 4.5" Black Mamba or Scorpion; HK VP9 threaded barrel; PMM Comp for P365, P365XL, G19 Gen 4.

MDT 35mm High One-Piece Mount - $200;
MDT 34mm Med One-Piece Mount - SOLD
ZCO 36mm 1.1" (APA made) scope rings - SOLD
American Precision Arms Gen 2 Tru-loc 35mm 1.100" Scope Rings - $80;
American Precision Arms 30mm 1.031" - SOLD
ZCO 0MIL 36mm Cantilever Mount - $250;
Spuhr SP-6601 6MIL/20MOA 36mm Mount - $250;
Seekins 30mm 0MOA Cantilever Mount - SOLD
Vortex 34mm Cantilever Mount - $150;
Vortex Spitfire HD Gen 2 5x and Viper Red Dot combo - SOLD

All items include shipping CONUS. What you see is what you're getting. I only accept Zelle or cash, so please do not ask if I'll take any other form of payment. Trades/partial trades I'm interested in are certain Aimpoints; Surefire pistol lights; Volquartsen 4.5" Black Mamba or Scorpion; HK VP9 threaded barrel; PMM Comp for P365, P365XL, G19 Gen 4.

XLR Industries Element 4.0 Magnesium Chassis - SOLD
JAE 700 G4; 700SA, RH. Used in a couple matches. - $1050

MDT Dampers SRS-X Green - $50
Seekins ProComp 10X stock, Black - $90
MDT takeoff pistol grip carbon - $100

(see other listing for mounts & rings)

American Precision Arms Gen 3 Little Bastard - 5/8x24 - 6.5mm - SOLD
Heller Arms Muzzle Brake - 5/8x24 - 6.5mm - $50
PWS 5.56 Flash Hider - $20
Elite Iron 5.56 OP COMP Brake - $85
CMT 5.56 Combat Recoil Compensator - $50
Elite Iron CQC Brake and Cover Cap - $125

Mcmillan 7" Rail w QD mount - $25

MDT MLOK weights - SOLD

Tier 1 Concealed Axis Elite for Sig P365 - $100

Huge Savings On Great Optics

As we are sure you're aware we offer the opportunity to Save big $$$ - on Open Box, Demo, Clearance, Bundles & Specials.

Thought we'd post a few examples:

Open Box GPO SPECTRA 8x 2.5-20x50i - G4i reduced from $1,399.99 to only $999.99

Demo GPO Passion ED 10x32 Binocular reduced from $549.99 to only $349.99

Demo & Open Box Leica Rangemaster CRF 3500.com starting at only $799.99, reduced from $1,299.00

Open Box Leica Geovid Pro 10x42 AB+ Binocular reduced from $3,499.00 to only $2,699.99

Open Box Swarovski STX Modular Eyepiece (Straight) reduced from $2,699.00 to only $2,299.99

Open Box Zeiss Terra ED 8x32 reduced from $449.99 to only $389.99

Open Box Konus Konuspot-65 15-45x65 Spotting Scope reduced from $269.99 to only $109.99

Open Box Sightron S-TAC FFP 3-16x42 Zero Stop - Mil-Hash-2 reduced from $659.99 to only $449.99

New, Damaged Outter Box Athlon Midas TAC GEN2 HD 5-30x56 - APRS15 FFP IR MIL reduced from $649.99 to only $589.99

Open Box Swarovski STS-80 HD Spotting Scope - Body Only reduced from $2,799.00 to only $2,399.99

Demo Nightforce C648 ATACR 5-25x56mm F1 - ZeroStop - .250 MOA - DigIllum - PTL - MOA-XT reduced from $3,100.00 to only $2,699.99

Open Box Leupold VX-6HD 3-18x44mm - FireDot Duplex Illuminated reduced from $1,899.99 to only $1,499.99

Demo Steiner T432 Prism Sight with Rapid Dot 5.56 reduced from $699.99 to only $499.99

Open Box Sig Sauer Kilo6K HD 8x32mm Binocular reduced from $999.99 to only $799.99

Open Box Sig Sauer ZULU10 HDX 10x42 Binocular reduced from $1,399.99 to only $1,099.99

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com