For Black Friday, we are bringing back a special bulk deal for the Barnes 22 Cal 77gr HPBT Match Burner Bullets. Limited quantity this time unfortunately. These are brand new bullets, bulk packaged to save you money. A SMK 77gr is what is used in MK262, but if you're reloading either short barrel or for longer distances, and you want similar performance at a fraction of the price, this might be for you (if you reload or are thinking about starting) -- not loaded ammo.

Free Shipping on all quantities:

100 ct sample packs - $24.99 (24.9 cpp)

500 ct bulk - $99 (19.9 cpp)

1000 ct bulk - 189 (18.9 cpp)

3200 ct bulk box - $475 (14.8 cpp)

https://ravenrocksprecision.com/22-cal-224-diam-77gr-hpbt-match-burner-bullets-w-cannelure-updating/

Lots of other reloading deals on the website as well.

Brand new 22 cal (.224") 62gr FMJ-BT Bullets as low as 5.9 cents each + Free Shipping. These are range safe (no steel core). $475 shipped for (2) OEM boxes of 4,000 each for a total of 8,000 bullets. Reload your hearts out.

We also have the best price on any new 9mm bullets for reloading on the internet. Starting at 4.7 cpp + Free shipping. Also, Free shipping over $50 on all handgun reloading components for BF.

Got a few things left.

V seven 6.5” barrel. 150.

Midwest over suppressor ready rail 10.5”.


Sold

Well I acquired this...



I'm not sure how I feel about it. I need to get some ammo for it and see how it shoots.

It's definitely cobbled together...
After doing some digging and pulling it apart. It's a Chinese mauser. Have to pull the scope mount off to see what year it was made.



After I took the scope off. I found that the weaver rails are literally just epoxied onto the receiver. So I guess that's nice that it isn't D&T.

Barrel is spot welded to the reciever..


Thankfully I didn't pay anything other than about an hour of my time moving firewood.

Story goes buddy bought it thinking it was a pre64 winny in 22-250. Buys it for 375 and it turns out it's a 220 swift Chinese mauser.

I'm gonna grab a box of ammo and sight it in for shits and giggles. Probably cut the spot weld and pull the barrel. When cleaning it I could see the stamping of barrel maker on the barrel face.

Pretty sure it was made in a garage with a Dremel but we'll see.


What does a guy do with a rough mauser action??

Remington 700 H&S stock that was professionally cut for a M5 bottom metal. $225 shipped

Used for about 10 prs style matches. Has a small scuff that I'll show a picture of. Have a set of vortex rings I will include if you want them. Used them but upgrade to a sphur.

Have the box, throw lever, sun shade.

$2,000 shipped. Insurance will be extra we can talk about.

Pictures attached. The picture of the front objective, that line is a reflection of an electrical wire for some lights I'm putting up in my reloading area. Glass is 10/10. Spuhr mount not included or for sale.

SOLD

I have a few brand new Grayboe SA M5 DBM’s asking $120 shipped each

Vortex Gen III Razor 6-36 EBR-7D mrad $2300 plus shipping New in Box

- Gen 2 Cronus 4.5x-29x56 MRAD with the APRS6 reticle. Vortex 1.26” PMR rings. Butler creek caps, MKM parallax wheel and oem throw lever. Package deal only, I have way too many extra rings/mounts sitting around as it is. Glass is clean and clear in excellent condition. The scope body has 2 dings (pictured) on top of the bell, purely cosmetic. Butler caps cover one of them. $1175 shipped

- Nightforce ultramount in dark earth 30mm 20moa 1.54” P/N A682. Mounted for 5 mins, didn’t like the look of it. Basically new in package. $265 shipped

- Knights Armament Taupe 34mm 20moa P/N 25284. Very good condition. ($OLD)

- Vortex pro series 34mm 0moa. Came as a spare with a gun I bought a while back. I’ve never used it, I believe it’s new. ($OLD)

Prices are shipped to the lower 48 only. PayPal or Venmo for payment.

I have a triple pull for sale that’s been used twice.

Text me for pics. 4804678090

$800 plus whatever shipping you want. Ground insured should be about $20.

Thanks

SOLD ZCO 5-27X56 10-MIL NLE MPCT1 Scope. Scope is in great condition with perfect glass. Scope was bought brand new less than a year ago from CST. The scope will ship in the original box with all of the original paperwork and accessories. Not interested in any trades at this time. Selling $$$, price includes shipping to the lower 48. Will ship via UPS Adult Signature Required. PayPal F&F for the form of payment.

I will only sell to established Hide members that I can verify through their previous Hide transactions and feedback.​

FN M249s Para


***SOLD PENDING FUNDS TO ELOHIM***

Like new condition
Have shot approximately 200rds through it.

I’m the original owner & purchased through EuroOptic
Includes everything original, box etc, plus (2) 200rd nutsacks and around 1k links. Eotech not included

Selling for $8000 shipped & insurance
Face to face option for Northern Ohio

Trades: Terminus Zeus QD action; Schmidt Bender US scope with msr2

Just came on Newsmax. We don't know if this is a "decoy" as Matt Gaetz may have been (i.e. to flush out the Swamp Rats), but we'll see.

Now if we can get Brandon Hererra for the ATF, and confirm Dan Bongino for USSS!

So my order got messed up and I ended up with a barrel that I don't have any need for. Just want to get my money out of it.

Manufacture: X-Caliber
Material: SS
Length :27"
Twist 1:9
Bore: 256
Groove: 264
#of rifling: 6
Finish: polish
Contour: #17
Cryo: no
Fluting: no

Price: $230 Shipped

Good morning everyone, first of all, I'm sorry if this is posted in the wrong place. However, my question relates to chamber pressures and I figured the reloading forum would be my first stop.

I was asked a question by a friend that's not very gun savvy and I don't want to answer incorrectly.

He asked if an Uberti 1873 SA colt clone could handle all .45 colt factory loads. Not including any +P or "magnum or hot" loads.

I figured the answer would be yes, based on any factory loaded ammo must be loaded to our below SAAMI Specs (.45lc is 14,000psi) to be commercially sold and advertised as standard. 45 colt ammo. Would this assumption be correct?

I know many .45 colt rifles and even the rugers and some other brand revolvers that can handle 25,000 psi. The Uberti is a colt clone and is made with the 14,000psi rating. Is there any factory ammo that he should stay away from? Or would the extra psi rating be more for hot loads or +P loads?

Any help would be appreciated. Have a good day folks

Perfect condition black foundation Centurion inlet for impact 737. OTM bottom metal, Wiebad cheek pad, thumb wheel adjuster for cheek riser, full brass weight kit with O-ring groove and threaded to ease and removal. Full arca rail. Two round holder. No mag, or mag blocker. Obviously no barreled action either!
Looking to trade for matrix pro or pro II.

Starting to load some 77 grain tmks in 5.56 cartridges for an AR. Would anyone happen to have a picture of the reloading manual for this recipe?

The Sierra ap is no longer supported on my android phone - says the app is too old.

Thanks!

I have a lightly used set of action screws for a BA Comp Chassis. $10 shipped thanks for looking!

I have a never used MPA 2 round holder for MPA BA/BA Comp/ESR for .308. $20 shipped thanks for looking!

I have #300 Hornady 168g BTHP

#100 SMK 168g

#100 SMK 175g

All boxes unopened. $190 includes shipping and PP fees.

I'm sure there's plenty of people researching NVG that are considering a Nocturn Manticore-R. Tonight was my first night out with my set, so I figured I'd give an initial impression. I'll also talk a little about Apollo Gear which is where I purchased them.

The Manticore-R is their rugged (hence the R) that is an aluminum housing. First impressions it it feels like it's built like a tank. These will be seeing some fairly hard use which is why I chose this housing over others. First impression is that it accomplishes the goal.

The articulation is stiff yet smooth. I believe you can adjust the tension via screws, but the way it is set currently is prefect for me. Not sure if that's how it's set from factory if the builder set it. Regardless, it means that one way or another, you can get the tension you like. The tubes have individual shut off when rolled up and that seems to work as intended. There is no obstruction from the battery port, so they will fully articulate just shy of vertical.

The controls are push buttons and very stiff. Which is a good thing as you basically can't accidentally press a button. It has +/- manual gain buttons, an onboard IR, and power button. I do feel a knob is easier/faster to fine tune the gain....but not enough that I regret the push buttons. The battery cab does somewhat get in the way so you have to position your hand/fingers in specific positions to press the buttons. Not a huge deal.....just being picky mentioning it.

The rest of the unit is the generic Carson Pvs14 glass. I decided to go this way vs something like a 31a or 31d or anything fancy like RPO or boomslang.....just for the ease of maintenance in the event of damage.

That's about all I can say for the housing and such as there's really not much too them and that's part of the reason I chose the Manticore. It's a minimalist rugged housing that has manual gain. No large housing or anything I don't need.....except on board illuminator. I don't need that as I use other illuminators for different tasks and will likely never use the onboard.



As far as Apollo Gear, Ryan (owner) was extremely helpful. We talk about my needs for housing and tubes. He agreed that something like the Manticore was likely a better choice than a 31a, and while the 31d was also a good choice for my neon eds.....I'd be able to get better tubes for the same price as a 31d.

He tends to use 24um or 24ua L3 tubes. We mutually agreed that it made sense to look for around a 35snr (since that's not a hard number to get on L3 tubes), and then prioritize the lowest EBR in the tubes he had on hand.....mainly because I work in a very hot environment and while EBR is overvalued a lot, it made sense to make that a secondary priority just to be safe.

The packaging from Apollo was far and away better than it needed to be. The nvg came with a case, a single 123 batter, stickers, wipes, and the spec sheets. A very nice and need package.

I'll post the spec sheets below. And while I'll keep the actual price private (since pricing can fluctuate on many things that are things that can and can't be controlled), it's in the +/- $10,000 range. Just so anyone reading has a ballpark price to see if a build like this is in your budget.


The below pics were taking with an iPhone. Conditions are completely overcast with no moon or stars visible. Very little ambient lighting in the immediate area as its in a semi remote heavy brush area. And just started with a new moon even though it's not visible currently.

Pic 1: just taken with iPhone
Pic 2: same area through a single tube with gain set to around medium to low
Pic 3: same area with gain at max

When can we expect prices to go down and quality to go up ?

I hear even the best ammo manufacturer (Hornady) , hasn’t been able to source the correct powder and quality has suffered as a result

Selling 95 pieces of Lapua 308 brass
1-2x fired
3 of the pieces are very tarnished

asking $50 shipped

Purchased this Manners stock EH1 from Redvanes a couple years back, put my Tikka 6.5 varmint in it, never left house, perfect condition, but listing as used due to putting barreled action in it.
$680 shipped

16" Noveske .300Blk. Gen 1 Noveske Upper Receiver, Noveske NSR 15" MLok Rail, 16" Noveske .300 Bik Barrel. 1/7 Twist. Barrel is cut for an FSP. Rail has a small ding from hitting something on the front

$650

It’s a bit late in the day for this, but does anyone know of a deal, or slight discount, on Terminus Apollo actions? If so, please direct me that way. And no, I’m not interested in buying from a scammer. But, a want to buy ad is always good to root one or two out! Thank you.