This one is a project that I just haven't had time to play with. It's a vanguard short action (which has quite a bit of room), and a Mcgowan barrel. I ordered the barrel a few years back, but it's a 1-8 twist so I could load heavies, spiral fluting, 24" length, threaded 5/8×24. It's in a bell and Carlson stock that I sponge painted. Factory trigger and bottom metal. The action was unfired when I had the barrel switched, and now it has about 15 rounds through it. I started barrel break in, cleaned it and never got back around to finishing it. It shot fine, just under 1 moa if I remember correctly, and I'm sure would tighten up after a few more rounds. I have almost a case of 200gr Hornady ELD-X ammo available to the buyer, and a set of dies, some brass too if interested. I rattle canned the barrel, since it came in the white. The one piece base was painted to match a different rifle. $750 shipped, scope and rings not included.

Weatherby vanguard L/A with a new unfired heavy fluted barrel from McGowen (I think). I ordered this barrel several years ago with the idea that I'd be able to load and shoot 175's at ridiculous speeds. The 270wby case with those heavies will make a long range powerhouse that should rival the 28nos or 7prc ballistically. I never got around to putting it in a stock or firing it. I did spray the barrel and action, mainly just to protect it, since the barrel arrived in the white. The paint has been dinged up just a bit from moving things around in my safe, so you may want to paint it all again, or cerakote it. This barrel is a heavy varmint contour, 1-8 twist, 26" length. $600 shipped.

I have several boxes of factory ammo available to the buyer, I think I have several pieces of brass from a different rifle, and maybe a set of dies as well.

These things are shooters. I have been looking for one for sale for a while to determine what this one should sell for, and nobody seems to be selling them. Fluted barrel, stainless action and barrel. This one is chambered in the reliable 30-06. I killed my best deer to date with this rifle. I sponge painted the bell and Carlson stock it's sitting in, and my gunsmith threaded it and blended the brake. If you want an indestructible, accurate and lightweight hunting rifle, you could do alot worse than this one. $800 shipped. I've also got several boxes of factory ammo available to the buyer, probably a set of dies, some brass etc..

For sale, brass weights for Mini Plate V2, screws are not included, just weights as pictured.

25$ shipped TYD, PayPal F&F or Venmo

I have 2 AI AX S/A Chassis's for sale. Both are used and have an ARCA rail plate on them. They are both in extremely great shape. $1350 each.

Up for sale is my EDC gun, a Wilson Combat X-Tac Elite 9mm Carry Comp 9mm…It has roughly 500 rounds through it…shoots like any Wilson, lights out, and comes with at least 5 Wilson 9mm magazines. It does have a tritium front night sight on it for low light. Absolutely no recoil with this gun…New these are over $4k…looking for $2500 shipped from my FFL to yours. Only getting rid of it because I have a new 10mm comped gun with the RMR mount on the way from Wilson. Thanks for looking!

Trades…anything Schmidt Bender…looking for a PMII possibly for another custom Lane rifle I will be having headed my way soon. Maybe something Swarovski too…spotters or binos preferred.

Mac

Sold

SOLD This is a Retro copy of the M16A1 from the Vietnam era. It has an original period buttstock and pistol grip. It is built on a Harrington and Richardson lower, Aero Precision bolt, tear drop forward assist, Brownell's 1:7 upper, and is custom Cerakoted in Colt Gray. The barrel has a birdcage flash hider and bayonet lug. The gun is new and functions 100% with all types of ammo. The gun come with one 20rd magazine. You can see a function test of the gun below using 20 and 30 round magazines. $995 shipped to your FFL. No sales where prohibited, know your state and local laws.

Login to view embedded media

AR in great condition, has about 500 rounds down it and is very accurate. I faced off and trued the mating surface where barrel seats so it’s “accurized”. Shoots .75” or better with all the quality ammo I’ve tried (mostly Berger and Hornady black/match is what I’ve shot)
*Details below*
-Aero Kodiak brown M4E1 receiver set
-Aero Precision Pro series BCG
-JP industries adjustable gas block and silent capture buffer spring
-Faxon match series 18” barrel
-B5 stock and grip
-larue Tactical trigger
-Strike industries gridlock lite 17” rail
-vortex solar sparc red dot.
$1300 shipped to your FFL
Trades considered (can add cash)
-impact 737r short action or similar
-foundation Samson stock
-Leupold Mark 4hd 6-24 or 8-32
-Japanese glass binoculars

Holiday Sale at Precision Werk!

This season, we're making it even easier to gear up for your next precision rifle competition! Enjoy 10-20% off on all items—no code needed.

Most items are in stock and ready to ship, so you can get your gear in time for your holiday shooting plans and prepare for the next season.
Need something special? If an item you’re looking for isn’t currently available from the brands we carry, let us know—we’ll do our best to order it for you.

Have questions or need assistance?
Call us: 626-757-2289
Email us: [email protected]

Shop now at Precision Werk and stock up on all your precision rifle essentials today!

Thoughts? Can find either online as well as Hornady, Weatherby and Nosler.

Let’s talk powder. Have H1000, Retumbo, and H4381sc. So think I ok there.

Black Friday and Holiday sale specials from JRH Enterprises- 32 REAL years in business!


These have already been moving pretty heavily-

PVS14 WP3 SLH White Phosphor 3rd gen Night vision device as low as $2899.


Great unit, excellent price, all standard accessories, IN STOCK, shipping out to you the same day you order (M-F). Order by 12 noon Eastern for same day shipment.






DUAL TUBE SETS in stock, ON SALE and shipping immediately...



Katana R ruggedized night vision devices in stock!

BLACK FRIDAY SALE PRICES NOW!!! Save $1500. on high quality YH grade White Phosphor 3rd gen units!

Katana R night vision dual tube sets $1700. OFF

IN STOCK READY TO SHIP AS OF 11/20/24


The NEW “Ruggedized” Ultralight Articulating Night Vision Binocular “Katana RUGGEDIZED” with YH HIGH GRADE White Phosphor 3rd Generation tubes. Ships with 1900 FOM minimum tubes, use the drop down menu to change to 2200 FOM minimum tubes for more performance. Feel free to call to order or with any questions.


912.375.1480

912.379.9441

The Ultralight Articulating Night Vision Binocular – Katana Ruggedized (UANVB-R) “Katana Ruggadized” is a articulating binocular housing made of high strength aerospace grade 7075-T6 aluminum. Using advanced multi-axis CNC machining an ultra lightweight and robust design is achieved, including an optimal single piece pod geometry. This binocular includes features such as individual pod stow shutoff, IPD stops, user adjustable pod tension, and low battery indicator. The device is powered on-board by a single CR123A for a continuous runtime of ~25 hours, and equipped with a LEMO port for external power pack use to achieve extensive run time

Helmets-

Galvion Viper A5 Ballistic helmets IN STOCK-

Known as an industry leader in helmets, these helmets take about 6 months to get in. When they are in inventory, they sell out quickly.
Galvion Viper A5 helmets IN STOCK!



For about the price of a skateboard "bump" helmet you can have a higher quality helmet that actually has ballistic protection.


"But, but, but I want a ballistic helmet that weighs about what a skateboard bump helmet does!"

SAY NO MORE!!!

Check out the Caiman Ballistic helmet system-

Caiman ballistic helmet system SUPER LIGHT WEIGHT ballistic helmet



When these first started arriving I thought due to the crazy LIGHT weight that someone had screwed up and sent us bump helmets instead! Nope! The Caiman is THAT light.


Normally about a 10 month lead time on new orders- but we have them IN STOCK RIGHT NOW.

Caiman ballistic helmet in stock, crazy light weight!!!


InfiRay RH25 V2 Rico Micro thermal monocular



This is the new one baby, complete with all the new features and very handy USB-C port! Everything you've come to love in the RH25 with some extra features.

RH25 V2 Rico Micro thermal monocular



CALL to order if you can.

912.375.1480
912.379.9441


Best helmet upgrade you can make!



4DT Hive retrofit helmet pad sets-

4DT HIVE retrofit kit standard pads

4DT HIVE retrofit DELUXE pad kit-



4DT HIVE Deluxe pad set in stock

In stock and on it's way to you today if you order before 1pm Eastern!


NEW HIGH GAIN Photonis Echo spec WP PVS14s-

We are excited about this one! Always a fan of Echo spec tubes, we are excited that they got even better with 60,000-80,000 US gain!!

Affordable tube offering and IN STOCK with no wait!

HIGH GAIN Photonis Echo spec WP PVS14s in stock and ON SALE CHEAP!!!

$2899. while they last!


BE SURE you get the sales alerts emails-

Sign up here!


We will be posting more specifics next week. But some items due to limited quantity will ONLY be available via the email blast.

Thank you for 33 YEARS, looking forward to another 20 or more!!!!
Robert


In business since 1992. Always quick to ship, always dependable. JRH Enterprises

912.375.1480
912.379.94441
Phone hours 9am to 7pm Eastern M-F Saturday 9am to noon.

[email protected]

Hello all, and Happy Thanksgiving! Just found this site and the "For the new guys" thread was incredibly informative so figured I would join the group. Mostly here to read, learn, improve. I have been shooting and hunting for 40+ years. Currently use a Rem 700 in 6.5 creedmore or AR10 .308. Thank you

Have a Silencerco Omega 300dt that has maybe 60 rounds down it with an AG Suppressor cover.

On a form 3 to your dealer $525 shipped.

Ssssooooollllddddd

Hi everyone,

I'm a middle-aged shooter new to the Hide. I grew up in a rural area and shot pretty frequently, but other than taking a deer once every few years, I haven't done much shooting as an adult. A few years ago, my dad had a health scare (he is fine now), and it made me realize how little I knew about the basic setup, care, use, and maintenance of firearms. I had always relied on him for everything—sighting in rifles before hunting season, the guns themselves, ammo selection, gun cleaning and care, etc.—and it made me realize I needed to develop some skills if I wanted to be able to pass them down myself.

Basic things I'm working on right now include trying to put together a comprehensive checklist for firearm maintenance, care, and cleaning (how often, what to look for, what methods), getting comfortable sighting in rifles myself (along with scope setup—I know very little about optics in general), and buying or assembling three high-quality bolt-action rifles and one shotgun. I grew up shooting a .410 break-action, .30-30 lever-action, 12-gauge pump-action, and .30-06 bolt-action, so those are what I'm most familiar with. However, I'm really interested in some of the newer cartridges that have come out in the last 20 or so years. The only thing I am sure of at this point is that I want a bolt-action .22 that is accurate and has a threaded muzzle—I want to use it to retrain in basic marksmanship, and being able to shoot suppressed subsonic ammo would make that a lot easier.

I am also planning to learn how to do reloading, which is a bit intimidating due to the explosive nature of the materials used. I have pretty good experience with some similar technical hobbies like bladesmithing and pen turning, but I need to settle on the calibers for some of my higher-powered rifles before committing to getting started. I have read a lot on this forum, watched some videos, and read the ABC's of Reloading 10th edition. I'm also looking into a class offered by the NRA—the "Basic Metallic Cartridge Reloading Course"—which is offered in a nearby city a few times over the coming months. I would love to know if anyone has experience or recommendations on similar training options.

In terms of less important goals, I am interested in and fascinated by long-range shooting and would like to develop some skill in that area. Most of the hunting I have done has been at what most people would consider extreme close range (~50 yards, with the long-range extreme being about 200 yards), normally out of a deer blind or, more commonly, off someone's back or front porch. I have a friend who is used to the more Northwest style of hunting who refers to what we are doing more as harvesting rather than hunting, and honestly, he's not wrong. I am not really interested in the PRS or NRL style competitions, though I might try competing in one at some point (with no expectation of doing well at all) just to have a goal to guide some of my training.

I am really fascinated by achieving accuracy through the combination of my skill set and equipment—probably more than what is required for my most likely use cases (hunting at short range). There is something I find profoundly satisfying about being able to hit exactly where you want when you want, and that is part of what I really desire when I settle on my setups. Right now, I am just setting aside a few hundred dollars a month and establishing a fund for any purchases I eventually pursue down the road.

Hey fellow hiders,

I'm starting to get the idea that traditional woods stocks look just as good sometimes. Post what you got and share details on barrel length, etc.

I'll start...
Howa mini
6.5 grendel
Factory 20" chopped to 18"
Boyds pro varmint
TBAC DOMINUS

For those who have an AMP press, I thought it would be interesting to see others' plots and what prep they did to get said plots.

To kick it off:

6 BRA
105 Berger Hybrid
Lapua Brass (once-fired/formed)
FL sized and mandrelled (sp?)
Moly neck lube twice - once before mandrel, once after
LE Wilson seater
20 rounds seated

The bummer is that I was running about a 6 lb spread until #s 17 and 19, which pushed the spread out to about 10 lb.

Has anyone purchased the Garmin Xero from family firearms before? It is significantly cheaper than anywhere else you can buy it. I am just wanting to make sure it is legit and and wanting to see if anyone else has had any experience with this company.
https://www.familyfirearms.com/product/gar-010-02618-10-xero-c1-chronograph-100-5000-fps (You have to add it to the cart to see this price)

Thanks,

TS Customs KS1-A stock. Cut for Impact Precision short action, M5 bottom metal and up to an M24 barrel channel. Has the Hawkins Precision bedding block as well as the ultralight arca plate and flush pic rail, weight is 40 oz. Bought from Impact Precision just a few months ago, and is still in new condition. $OLD

Thick German mom and teen daughter getting ready to ride some American muscle.

Howdy,

Looking for a clean Larue LT-840 0 MOA mount to finish a build. Please PM me. Thanks!

Best,
Clark

Up for sale is a like new, never mounted Primary Arms SLX 3-18x50 FFP scope. Has Athena BPR mil reticle. Comes in box with factory accessories.

Asking $365 shipped but offer up. Motivated to move this. PPFF, Venmo or USPS MO.

Getting out of thermals for a while, so selling my lightly used IRAY RH50R. I have experience with many brands and models, and this is my favorite to date. Will ship in the original box with all original accessories including an extra battery.

Purchased in August.

$4750 Shipped.