Hey all,

This scope didn't come with a sun shade but I think a different model scope shade will fit.

Let me know what you got.

****New items added to the hyperlinks*******

Printed up an organizer for my K&M equipment since I dont have a case. Also made a "gripper nut" for the shell holder to make it easier to tighten and loosen the case holder. If anybody could use one. If anybody has any questions or custom requests please let me know.

$33 K&M Turning tool organizer (includes gripper nut and set screws): Has the organizing rack that holds 10 total expanding mandrels or turning pilots in any combination, 7 shell holders, 5 of the threaded cutting bits, the turning tool, expanding mandrel holder and the shellholder tool. Can be mounted to the wall via 2 #8 screws or sat on a shelf.
$18 Gripper Nut Only (with set screws): Gripper nut to fit over the shell holder tool making it easier to remove cases. When installing this on the shell holder tool, align the hex shapes and press the tool all the way into the printed holder making sure its fully seated and then tighten the two set screws until they are just below visible. If excessive resistance is felt while tightening the set screws make sure the tool is fully seated into the printed holder. It is a snug fit and can seem like its full when it is not.

Other items people have requested:

The New - The One - DNT 7-35x56 FFP Riflescope only $599.99

A little while ago we informed you about the The New DNT Zulus Nightvisions. Arken is no longer handling the distribution for these. They are now being handled by DNT. Same great unit, still great pricing. DNT not only offers the 5-20 Nightvision Scope with, and without, Laser Rangefinder. DNT also offers a ZULUS HD 3-12X Digital Night Vision Scope with Laser Rangefinder and Ballistic Calculator. Equipped with the highly sensitive SONY STARVIS 2 sensor and an integrated 850nm illuminator, the DNT Optics ZHD312R/ZHD520R offers incredible visual sensitivity and illumination to see potential targets.
The ZHD312R/ZHD520R features a built-in laser rangefinder, providing accurate and consistent distance measurements between 5 – 1100 yards. The internal ballistic calculator quickly calculates your ballistic drop at the distance you`ve ranged.

We also announced the addition of the DNT ThermNight Thermal & Night Vision Multispectral Scope with Laser Rangefinder and Ballistic Calculator - PMS - Picatinny 0 MOA Short . DNT Optics TNC225R ThermNight, features a state-of-the-art thermal sensor for detecting targets and advanced high-definition digital night vision for identifying the.
The TNC225R excels in delivering superior operational effectiveness in various environments and conditions.

Now we are letting you know that DNT has added The New - The One - DNT 7-35x56 FFP Riflescope only $599.99 available in MRAD and MOA. This appears to be a mirror scope to the Arken EP-5 7-35x56. The reticles are slightly different, with the DNT 7-35x56 FFP Riflescope having the illumination in the whole Christmas Tree portion of the reticle vs the Arken EP-5 7-35x56 which is illuminated in only the center.

We are also told that the Japanese extra low dispersion glass in the DNT Riflescope is optically superior. It features a 45-degree canted windage indicator so you can see where you're at without compromising your shooting position. It also includes the Throw Lever.

Crafted with hardened aircraft-grade aluminum and Japanese extra low dispersion glass. THE ONE scopes are the result of a collaboration of PRS and ELR shooters. Quick target acquisition and precise engagements with our improved 45-degree canted windage indicator.

Specs,
Focal Plane: First Focal Plane (FFP)
Tube Diameter: 34MM
Zero Stop & Zero Reset: Yes
Length: 16 inches
Weight: 42 oz
Eye Relief: 3.5 inches
Illumination: Red, 6 Brightness Settings
Battery: CR2032
FOV: 7x – 16.66 @ 100 Yards / 35x – 3.34 @ 100 Yards
Parallax: 25 Yards – Infinity
Reticle: TOR (TheOne Reticle) / MPR (Multi-Purpose Reticle)
Recoil Rating: .50 BMG
Waterproof/Fog Proof: Yes, Nitrogen Purged

MOA:
Total Elevation Adjustment: 35 MILS / 110 MOA
Total Windage Adjustment: 16 MILS / 55 MOA

MRAD:
Total Elevation Adjustment: 35 MILS / 110 MOA
Total Windage Adjustment: 16 MILS / 55 MOA







We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

****New items added to the hyperlinks*******

Send me a PM if interested.
I printed this for me and a few other members if you think you could use one let me know. $35 TYD. This item has places for 2 lapua sized modified cases, 4 magnum size modified cases and 6 308 sized modified cases. This also has a place for both types of tool holders the straight rod and the angled rod, plus space for the drill and tap if you have it to make your own cases. this will sit atop a bench or shelf but can also be mounted to the wall via 2 #8 screws. Protect your investment! Let me know if you have any questions. Custom requests accepted also.

Other items people have requested: Hyperlink

22” length, 1.20” straight, 16 twist bergara b14r prefit barrel by KI Precision. Barrel has around 200 rounds thru it and shoots very well. I got this to run on my b14r while waiting for my Rim-X to arrive. Barrel shot very well with most test ammo but SK rifle match and Lapua center X shot exceptionally well. This match chamber is tight and you will want the stiffer extractor springs (KI sells these for around $10). SK and Lapua fed/extracted pretty well with a few FTE’s, but it doesn’t like the thinner rim on Eley too much. Ultimately I just don’t want to mess with my Bergara to get it to run when I’ve already got the Rim-x on the way. These are $675 from KI with a 5-7wk lead time. Asking SOLD shipped, pp f&f. Comes with seamless thread protector but it’s also threaded 1/2-28.

****New items added to the hyperlinks*******

I have had a few requests for a Giraurd trimmer Organizer. Incase anybody else could use one here it is. Price is TYD. Color will be black unless a custom color is requested. Thanks.

$30 Giraurd Trimmer Organizer: This will hold two of the wrenches on the top tier along with 4 different cutter heads and 8 bushings. This can sit on the bench or be mounted to the wall Via 2 #8 screws.

As always if you have any questions or custom requests let me know.

Other items members have requested

Ive been going around and making items for my reloading hobbies and I have made some brass catchers to save some clean up time for the trimmers I use. If anybody could use one I can print more up. I can customize other items also if needed. Shoot me a PM. can do black or red for any of them. If not specified I will ship what I have ready.

$28 RCBS Trimmer And Trim Pro II: This shavings catcher will work with the old rcbs trimmer or the trim pro II. If you have the old trimmer that takes shell plates let me know so I can send the pilot holder that has places for the shell plates, otherwise the trim pro II pilot rack only has places for the pilots. The pilot rack can be bench mounted or wall mounted. The catcher pan will just sit on the trimmer and can be removed to empty. This will come with a press fit cutter shroud to help contain brass from flying outside the catcher if running the cutter at high speed. I would only recommend using the shroud if needed. To install the shroud be careful pressing on and only press as far as to align with back of cutter head.

$25 TYD ( $35 TYD Large case collet holder) LE Wilson brass catcher: catcher for the LE wilson trimmer: The catcher sits on the rails and is matched to lock in place. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (7) and allen wrench.*****I have included a new option of a covered 14 case collet holder instead of the uncovered 7. If you want the Covered 14 model the cost will be $35 TYD. It will come standard with the uncovered 7 holder so if you want the larger one you must specify. Thanks.

$25 TYD Hornady Cam Lock Trimmer Brass Catcher: The catcher tray is magnetically attached to the blade cover so all you have to do is pull it off, empty it and place it back on. Also includes the Pilot rack that holds the allen keys and pilots. this pilot rack can be mounted to the table, wall or just sat on top of a bench/shelf.

$25 TYD Lyman Express Trimmer Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out. Also has a small collet rack that can sit on the trimmer or just sit on the bench. One of the images shows my first larger collet rack but thats too bulky, only going with the smaller one but the image shows how it sits on the trimmer.

$15 TYD Hornady Trio Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out.

$17 Frankford Arsenal Brass Catcher: This has a basket that just slides up to the trimmer head that catches the shavings. Remove it and dump them out. Will work with Both frankford models.

$27 TYD Forster Original Trimmer brass catcher: The catcher sits on the rails and can be moved left or right. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (6) and allen wrench and pilots.

$27 TYD Redding 2400 Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the case very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.

$26 TYD Lyman Universal Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. Since the cutter base has a radius, if the catcher isint staying where you need it you can use one of the pilots to place into the pilot holes right behind the catcher basket to keep it from sliding toward the middle. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the cutter very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.



Other items people have requested: Hyperlink

Established members only.
Please let me know if you have one or two you'd let go of.

trijicon acog 4x32 TA31-D-100311. Condition is New. Comes with rem acog illumator, press fit kill flash and gdi qd mount. Looking for $1100 shipped.

Over time i have had more than my fair share of expensive Alpha/Top Tier Glass fail ...

Just recently i had 2 current Top Tier optics on 2 of my Desert Tech,s go down. While still waiting for this to be resolved i decided to go the complete other end of the scale...yep....."Cheap" China scope !!!

My dealer here in Aus sent me 2 of the ARKEN EP5 7-35 and said....try to break them!! .................but also give an honest opinion on how they stack up. My dealer knows the Glass i own, and have owned and also the regularity i shoot.

Not really having any high hopes i was pleasantly surprised when the Arken,s showed up..

#1 heavy , externally .....very well built.
#2 expecting the worst..... the glass is quite good ...especially considering the price tag !!
#3 Turrets....very positive .
#4 Tracks great!!

We mounted the 2 on DT 338Lap. 300 Win and the 50BMG.

Today myself and friend fired circa ......"100" 300wm....... "150" 338Lap and "90" rounds of 50BMG ... Both the Arkens went through that session without any glitches what so ever!!!

Focus remained constant , while not Alpha glass they are more than capable of providing a very rewarding experience . Distances we shot at were 1200yds and 1500yds and 1700yds.

The 2 plates "Knocked " over in front of the log are 1200yds...the 50 smacks them down with authority !! The couple of misses onto the log actually penetrated out the rear side....very impressive !!

Are the Arkens the best glass......hell no... BUT !!! They are VERY respectful and i have no problem with using them . They held up to the 50 better than a couple of "ALPHA" scopes ( that shall remain nameless) that shit themselves after a dozen or so shots!!

Truthfully....the hardest thing to overcome is the mind set that these are "Cheap" and "Chinese" ....functionality wise they a very good!!

These will be subjected to a few more sessions over the next weeks...lets see if they hold up...

New in sealed package, B&T Acro Adapter for Glock MOS BT-212287
$60 PP F&F

Selling my excellent condition Airbus marked Hensoldt ZF 4-16x56 FF-LT with H-59 reticle and locking turrets along with original manual, cleaning kit, Tenebraex adapter, and flip covers. CW elevation.

Please DM me with questions or to purchase

$2900 shipped, insured

Zermatt Origin, RH, 308bf, Area 419 knob. ~500 rounds through the action. No scratches or blemishes. $800. - SOLD

Both barrels were cut for AI shot roughly 800 rds each, then set back and re chambered for the origin. Straight portion of tenon will be ~1.5" less than standard print. Both are very accurate.

PRICE REDUCED - 6BRA ,Benchmark, 25.5", M24, 5/8"-24, 350 rds after rechamber. $350 $300

6 creedmoor, Rock Creek, 18.5", 5/8-24, 150 rds after re chambered. $250. (3340 fps with 87s). - SOLD

Paypal F&F

New in box, never mounted. Aimpoint Acro P-2 3.25 moa.
$525 PP F&F

Like new / unused.

$20 shipped.

Like new, unused SAC modular sizing die with everything pictured ($SOLDshipped)

Like new, unused Whidden seating die ($120 shipped)

Looking for a MK4 3.5-10x40 illuminated.

Hoping to trade my MK4 3.5-10x40 Mil/Mil FFP M5 conversion for it.

I know someone hates that MOA/MIL SFP setup……let me have it!

Only looking to trade, will not sell.

JMO

**4/5 UPDATED (Dot, Light, Grip no longer available - lowered price on P320)

Sig Sauer P320 AXG Legion aluminum grip frame
2 additional Sig Legion magazines - (5 total)
Sig Legion range bag and coin
Original Case & paperwork
Only a few months old, in pristine condition

$1,100

Will ship from my local FFL (I’m in Iowa) to your FFL (please provide that FFL name and address). Will accept USPS money orders or discreet electronic forms of payment.

I have a slightly used pair of Area419 Match Paired Scope Rings I want to rehome.
$150 Shipped CONUS

Used Mototech Scarbuator 3-select. Works great, shot about 40 rounds with it. Have since sold my SCAR so I don't need it. No moving parts. Allows you to turn gas down to where my SCAR 17 wouldn't function unless it was suppressed. No jets needed!
$120 $100 shipped.

700 shipping

I have a once used Badger Condition One / Hawk Hill Custom Data Card Holder for sale.
$100 Shipped.

Brand New In Package Geissele G2S-E Trigger. $150 $140 Now $125 Shipped in CONUS. Part # 05-276 Bought for a build and didn't use it.

• Two Stage for AR15 AR10
• It uses a standard .154” trigger and hammer pin so it will fit in any Mil-Spec stripped lower receiver.
• Smooth two stage 3.5 lb. trigger pull
• The G2S-E was designed to be a high quality, cost effective alternative to the SSA-E.
• The G2S-E is manufactured from the same tool steel as the SSA-E