ADL Model. Struggling here but I’m sure I’m an idiot and missing something. The HS Precision stock has a void, open space where the front trigger guard screw would go. This void goes all the way up behind the mag box. So there is nothing to screw the screw to. Is this a stock that requires a single hole trigger guard? If so does the front slide in and overlap or something. Any links to help or buy whatever this stock takes would be great. Thanks.

Vortex Precision Matched Rings (made by Seekins Precision) in 34mm by 1.00 height. Excellent condition. Very little use. 100 shipped to you.

I don't have words to eloquently articulate my feelings, so I'll just say it like this - about 100 years ago some asshole with a funny mustache who enjoyed painting 100% called this.

Login to view embedded media

Looking for an A2 6.5/308 bolt. A2 only. Wanting a 6rd mag as well.

What it says above, comes with Noveske 6.5 Creedmoor barrel, a Patriot Valley Arms Shockwave muzzle brake, and bipod. Shoots sub MOA with factory match ammo (Hornady 140 grain ELD), very low recoil with the brake. ARC mount not included but can be negotiated.

Package-$2200 TYFFL in the conus

Rifle only-$1200 no box but with bipod and brake. TYFFL in conus

Scope only-$1000 has box and paperwork that came with it. Includes the level, throw lever and rings. ARC mount not included but can be negotiated for. TYD conus

What’s for sale?​

L3i rimfire magazines! 1 as new Stinger billet 15rd magazine, 2x very tested used 14rd Elite magazines.

What’s it cost?​

Add shipping of your choice to stated price. Payments collected by nearly any discreet and feeless digital payment, Zelle preferred. Snail mail payment accepted too.

1. All three mags for $225
2. Stinger by itself $125 plus ship
3. Elite mags $65ea.

Brand new Aero Precision Solus Chassis 17" in Black for R700 SA.

$500 Shipped

Today I changed out a barrel on a Impact Precision 737R with a new Proof Stainless 6 GT barrel. After torqueing the barrel to the action to 75 ft. lbs. I put a
Manson Go gauge in the chamber and closed the bolt. No problem. I then put the No-Go gauge in and the bolt closed easily. Problem! I put a .0015" piece of Scotch tape on the back of the No-Go gauge and the bolt would not close. I didn't force it, but there was resistance on the bolt handle. I then took the Go gauge and put 2 layers of Scotch tape (.003") on it. The bolt closed easily. When I added a third layer of Scotch tape (.0045") the bolt again would not close. I'm taking this to mean that I have approximately .004" of excess headspace.
I'm new to swapping prefit shouldered barrels. My question is, is this a problem?
I have not fired the barrel yet, but am thinking about it. I can call the gunshop where I purchased the barrel, but since it's Saturday, I guessing I won't be able to call Proof until Monday. What should I do, shoot it or return it?
TIA
Nimrodmar10

LMT MWS 308, 16" chrome lined barrel, MLOK rail, Dead Air muzzle brake, Radian Raptor charge handle.

Excellent condition American battle rifle, roughly 400 rounds down the pipe, sub-moa accuracy (it particularly likes FGMM 168gr). Includes two 20-rd Magpul SR25 mags and a LMT torque wrench.

$2650 $2450 shipped. No trades and not splitting. Discreet Paypal F&F (preferred), venmo, check/mo.

Just found out there are some local 22 matches near me. I’ve always wanted to get in on them, but nothing was close. So until now I have held off purchasing a precision style 22. For those that recently have started, I’m curious if you regret the investment of going straight to a vudoo/rimx or if something like a b14r BA or a CZ457 would serve me well to get off the ground and see if I like it? Just interested in picking brains.

Like title says. Brand new never been opened. $250 Shipped

sold

Hey!
I have up for sale a Gen 2 Razor. It has some use of wear from matches, Glass is in perfect shape and operates as it should. I have a throw lever that can be removed easily on it now.

Shipped to your door for $1400 Paypal Friends and family. If you're in the middle TN area we can meet rather than ship.

PRICED TO GO QUICK!

So the head of DHS head of ICE and Attorney General all think the assholes at the FBI are leaking information to violent transnational criminal organizations in CO and CA so they can avoid arrest. It might finally be the straw that broke the peons back- Would love to finally see them ot for their many and heinous crimes. Like 25- life in gen pop.

I’m laid back here thinking…..yes, I do have a “ brain “. I am wondering if barrels for .22 have less potential for accuracy than non threaded…. I remember some super accurate .22 Anschutz barrels that were left bigger in diameter at the muzzle. With shorter bbls supposedly getting the full velocity from rimfire ammo, is there a chance that longer barrels can slow down the bullet and achieve better accuracy from some ammo ? How much velocity is lost per inch of barrel ?

For sale is a Manners Tikka T3 CTR Stock never used. $450 Shipped to the 48. Contact for rates outside the 48 no international shipping. USPS MO or Zelle Payment. First I will take it gets it.

Looking to trade a AICS 1.5 chassis Rem LA black skin (has one AICS mag and one PMag 5 for a Rem SA AICS, Manners or McMillan?

I have two Remington 700 actions for sell.
1 short action standard .308 bot face blued.
1 long action magnum bolt face stainless.
Will post pics later.
Any interest?
$450 each plus shipping OBO.

I have a used. but in good shape QC (quick change) Curtis Customs Vector Short Action with .308 bolt face.
It’s right handed with 2 bolt Knobs, action screws and trigger pins. It has about 3000-3500 rounds, roughly 2 barrels worth of rounds through it. Works exactly as it should.
Looking for $950 shipped to your FFL.

I would consider trades as well. Looking for higher end binos for spotting hits at 1000 yards.
Something like vortex 18x56 or similar.
If there’s a difference in value I can make up the cost.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

Ok,

I’ve got a crazy LOP. I also tend to need a fair amount of stock height (eg cheek piece/comb adjustment).

I find that the MagPul PRS is not long enough, nor does it get high end for your typical 1.5” rings. (That includes using the longer pads for the butt stock.)

Are there any really adjustable options out there?

I’ve tried the LMT DMR, MagPul PRS, and the B5 (not very usable with a bag due to lack of height)… I’m talking like Vision, MDT, etc. adjustability.

GB

New brass. $300 delivered . Trade to desert tech srsa2 accessories

The corrupted, weaponized tool of the Left, aka FBI, used classified information and tipped off contacts in L.A. of an upcoming raid.

Trump needs to pull the Security Clearance of the FBI and dismantle it. Aiding and abbetting fugitives is a crime, in this case, X a million cases. They would arrest and jail anyone that leaked information of one of their planned raids, say, on Mar-a-Lago. This is Treason.

Login to view embedded media

I am always looking for a decrease in time and increase in consistency/precision when it comes to “work” in the gun room, and leveling scopes seem to have some room for improvement.

My general method is that I level my rifle on a bench (backyard range), then put scope in mount and level that to a plumb line while doing my best to make sure the rifle is also level. I feel like this leaves some room for error. I do feel better about it now that I have a send it level on my mounts, as it seems to be more precise than a bubble level.

A few issues I have seen: Hard to find a spot on a gun to put a level, scope caps are not always level to scope etc.

I bought one of the Arisaka wedge kits, but its typically useless as almost all of my scopes are in mounts that don’t have clearance or work with a tool like this.

My research has lead me to the SAP Final Scope Level and the Badger Dead Level.

Do you have one or either? What do you like or not like about it?

______________________

TLDR: Is a SAP Scope Level or Badger Dead Level worth buying?

SOLD - No longer Available

I have for sale a brand new Athlon Cronus BTR GEN2 UHD 4.5-29x56 MOA scope. New in the box. Bought directly from Athlon.

Decided to go with a Leupold Mark 5 instead of this scope so looking to sell for a fair price.

$950 shipped to Lower 48. UPS ground fully insured with signature required. PayPal FF, unless you want to pay the GS fee of 5%. Also you can send a USPS money order if you would like.

I am new here on Sniper’s Hide, but have lots of seller feedback on Airgun nation, eBay and Gunbroker for years under the same user name.

Please PM me with questions or if you want to chat, I can provide my phone number.

Thank you.

I know suppressed barrels were made for the AW. Mark White/Sound Tech made a version I saw in person.

Does anyone make a similar integrally suppressed barrel for the AT? I don't know enough about the differences between the 2 rifles to know if something in the design of the AT prevents this.