15 Boxes of Berger 109 LRHT $260 per Box Shipped CONUS

Lot Numbers

6x 2378
4x 2935
2x 2805
1x 2771
1x P01872
1X P02402

Figured I would put this on here as a lot of Land Cruiser nerds are also gun nerds.. if you want a little nostalgia of the GWOT era cruising around shitty places in old land cruisers this is it!
1994 Toyota FZJ80 Land Cruiser 1FZ-FE motor with 175k miles. The rig is mostly just stock and very well taken care of. Only upgrades were done by me and include
-Off-road front and rear bumper with tire carrier swingout
-2.5” Ironman 4x4 suspension lift (springs and shocks)
-Ironman 4x4 steering dampener and adjusted castors
-touch screen apple car play stereo deck, 4 kicker speakers and a 10” kicker sub
-full vehicle weather tech floor mats
-full vehicle seat covers

I have the original front and rear bumpers as well as original floor mats

$15k cash price located in oregon
Always interested in gun offers as partial trades

We have a couple of side by side buggies that I drive around all the time. Recently I found a rifle rack that fits the buggies perfectly (it was actually designed for that purpose) and it was free. The rifles lay horizontal on the back of the cab.

The only thing wrong with anything is the old padding on the J hooks where the rifles sit has deteriorated a lot. I've already taken the hooks off and stripped the old stuff off of them. Now I just need to replace the padding with something better.

Here are my criteria. Hopefully I can find something that checks all the boxes. It needs to be outdoor worthy. The more rugged the better. Hopefully nothing too porous or with too much texture. I have found that with certain materials they hold on to sand or grit pretty good. Throw in the normal vibration and movement of everything involved and it becomes like sand paper. I wore the finish completely off of a suppressor and part of an AR lower by sitting it on the seat one time and I don't want to repeat that again.

If you have any suggestions please provide links if possible, but if not please tell me the actual name of the products you recommend.

I do have the option to put a wrap around parts of the rifle(s) that would make contact (for extra insurance) but I still need to replace the padding. Thanks in advance for your help.

Ok…now 6arc has my attention.

I have a nearly new set of unknown munitions tikka rings. Would like to trade for the same rings in Low.

Selling an unused Short Action Customs modular sizing die in 7 PRC. Has a .311 neck/shoulder bushing included. $275 shipped

Looking to purchase or trade for a surefire FA762SS and FA762SV. Form 4 or 3. Please PM with what you have!!

Had this in one of my Noveske’s but never saw a range trip. $165 shipped. PP F&F

Flat shoe, right hand bolt release 700 trigger - 170 shipped

30mm mpa mount 1.125 height with diving bridge. Cerakoted green. 180 shipped

I have a like new SIG Sauer Match Trigger assembly up for sale. This came out of a (Gen-1) SIG Sauer 716 DMR Rifle in 308 caliber.

Only $90 Bucks Shipped.

I will let this go for Only $70 Shipped & Insured.

Selling a 20” x-caliber lightweight contour 5/8x24 muzzle 1:8t 6R chambered by PVA in 22cm Approx 750 rd count. Brake not included $625 shipped

Might be buying a barreled action from them, anyone have a my feedback?

Remington 700 308 in XLR folding chassis, 24” barrel, Full Length ARCA rail, Elfman trigger, Omega ASR brake, Caldwell Bipod, Warne scope base, 10 round AICS mag, 200 rounds through it. Meticulously maintained no issues just making room for new projects. $1750 $1650 $1500 Shipped. No Trades.

Parting with a beautiful hunting rifle.
I had this built for a friend who won’t be able to hunt anymore due to medical issues.
Round count is 3 ( test firing by smith)

Built by Ragged Hole Barrels
Hell Betty ( defiance tenacity ) action
20” spiral fluted SS barrel, threaded 5/8x24
TT special trigger set to 3 lb
MDT HNT 26 arcs folder chassis.

Weight as pictured 6lb

Trades
ZEISS s3 s5
AI barrel in 308 or 6mm br variant
Smokeless muzzleloader.

I have this rifles twin in 6.5 PRC and love it. Literally nothing I would change.

Rifle is unfired outside of production. Only rounds fired were at the factory for sub moa verification. I have the little target card for that certification. It has a Nightforce rail and Atlas bipod pic section installed. Was planning for this to be my “kill anything in North America” rifle, then went for a custom. Asking $1000 even…

For sale: long action MDT TSS Gen2 chassis with the folding adapter. $600

In good to great condition. No issues and has a new battery.

450$ shipped

Starting a new business venture so gathering capital. The following prices are for each component, but I can have a LITTLE wiggle room if multiple pieces are purchased. By little, I mean what I can save on shipping since the asking prices are VERY fair already.

1. New Impact AW/AICS cut 737r 308 BF, 75 degree throw action. 2 1 now Available. Both are new with 0 rounds. $1250 for the action. Save yourself a couple hundred bucks. SOLD

2. New Impact Action wrench. SOLD

3. New ACE brake 6mm. 5/8x24 with ACE shield. $200 SPF

4. Black Foundation Centurion stock. Hawkins bottom metal. Used but not abused. Lightened buttstock. 18 brass weights. Arca rail. $1050 SOLD

5. Dark Distressed Foundation Centurion stock. Hawkins bottom metal. Used but not abused. Standard buttstock. 22 brass weights siliconed in, but removable. 2 round SAP holder. Arca rail. SOLD

6. Used 6 Dasher Barrels #1. I have not installed /fired personally. Chambered by Walls rifles for a PRS pro shooter. 27" long. 7.5 twist, comes with MPA DN5 brake. 1800 rounds. $200.

7. Used 6 Dasher Barrels #2. I have not installed /fired personally. Chambered by Walls rifles for a PRS pro shooter. 27" long. 7.5 twist, comes with MPA DN5 brake. 1500 rounds. $200

Prices will include shipping Actions will go from my FFL to yours.

Payment via Paypal F&F, Venmo, or Zelle.

So, my scope mount is too low(1.5" and 62mm objective are too tight to the handguard to squeeze a scope cap on).


It seems very strange to me to the point of thinking I must be missing something that this is an uncommon set of parameters?

If you have a large Objective scope, you likely want a 1.7" centerline mount, and it's also safe to assume you're shooting long range and therefore will desire 20MOA cant).

However, this seems to be a really uncommon configuration for most mounts? Most 20moa cant mounts are 1.5" but when you look for 1.7" mounts that can accommodate such a scope none of them have 20MOA cant as an option.

Is there a reason for this? 62mm isn't that large of an objective is it?

Absolutely NIB and never mounted on a grip frame. Includes barrel, suppressor height sights, optic ready, and spare O rings. $285 shipped. PP F&F.

Will a Medium/Heavy Palma barrel fit in a Manners inlet for a Proof Sendero? I'm thinking yes, but I'm confirming before I pull the trigger. Thanks!

We're headed out to SHOT 2025 this weekend. Enjoy some deals while we work new deals on our end. Thanks for your patronage.

New Primed 357 Mag Brass (Tarnished) - made by Starline, norma headstamp, RWS SPP. Back in stock in a limited quantity for the SHOT sale. $59 / 500 ct

Free shipping over $50 on all ammo - Norma 416 Rem Mag Solids still in stock.

We'll add a few more in the coming days.

German parts kit built MP5. Comes with b&t stock, b&t tri rail, fixed a2 stock and HK straight 30 rnd mag. $2900 or trade for long range comp builds.

I’m located in cullman, Alabama and I work in jasper, Alabama. Does anyone know of a decent rifle range within an hour?
Birmingham is an hour south and Huntsville is an hour north.