Vudoo polymer mags with Hoz & shield extensions. $65 each shipped or $120 for both. Both mags have the advanced follower and new spring. Mags are used very little and mag extensions are new. I purchased a different rifle to run next year so I don't need the mags anymore.

KAC 6.5 22” Rifle, less than 100 rounds, B5 precision stock, Geissele National Match Trigger, Sawtooth Full Length ARCA rail, Ambi CH, Leupold MK5 5-25 PR2 Mill in KAC mount with 35MM Viper top rail, DI precision wind Dial and Leupold Speed Elevation Dial. RRS Tripod not included

Watching Newsmax and the feed on bottom that scrolls across while the talking heads talk said Supreme Court unlikely to hear election dispute cases.

Selling all of my equipment, everything is like new if not new. Prices are shipped.

Franklin Armory Brass Dryer, brand new in box
$50 $40

Hornady 6ARC FL die, brand new $35 $30

Lee Precision 6.5cm ultimate rifle die set, $40 $30

Whidden universal click adjustable lock ring (x3), $120

RCBS Matchmaster FL 6.5cm dies, $120 $100

RCBS FL .223 dies, $30

Forster CoAx with Inline Fab mount and side rails, $350

RCBS Chargemaster 1500, $220

Franklin Armory Case trimmer/prep, $150

Franklin Armory de-primer, $30

Franklin Armory universal bullet seating die, brand new $60

Franklin Armory bullet puller, brand new $10

Prices are shipped

MPA BA COMP chassis. Used in several matches, has cosmetic blemishes but no chips/ gouges. Has all of the hardware needed.

-sold

-cerakoted vortex bronze to match vortex razor scopes.
-MPA internal weights included
-enhanced bag rider included (not pictured)
-MPA 2 round holder

ABC accidentally aired election results of Harris winning PA by 5% with 100% in. They are cheating again and don’t care if you know it.

Looking for a set of rings or possibly a non-canted mount by ARC or Area 419.

NO TRADES
Discreet paypal gift or Zelle

$545 shipped

Sons Of Liberty Gun Works AR15 Broad Sword Billet 7075 T6 upper. Requires thermo fit barrel installation.
Sons Of Liberty Gun Works 13" M89 Drive Lock rail (steel barrel nut)

Both are brand new

I have 200
175 grain
Berger otm 30 cal bullets.

Lot number
1763

Asked 100 shipped.

Selling my Foundation Centurion cut for an impact. I’ve used it for almost a full season. Rattle canned the buttstock black but can remove if requested before I ship.

Will come with an OTM bottom metal and also the cheek pad and match saver

Asking $1000 shipped and insured
PayPal ff to the lower 48 or cash app

NSW 17" recce "table top" clone upper. Comes as seen with Colt Keyhole upper, Colt BCG, Lilja 17" recce barrel, KAC recce gas block, KAC PN21318 FF RAS long, KAK BE Meyers 249f clone. Barrel, handguard, and MD are all new condition.

$1400 shipped

PayPal F&F, Venmo F&F

I posted this in the RPR thread a while back but haven't got any replies yet. I'm hoping someone can give me an idea to fix my problem. I have a RPR in 308 win. and have recently purchased 500 rounds of plastic training ammo that the german military uses for practice. It's NATO 7.62 x 51, runs a 10 grain plastic projectile at around 4500 fps, and has a plastic case except for the very rear of the cartridge where the rim and primer are which is brass. It's pretty cool stuff with a max effective range of 100-150 yards. I think it's going to work great on rodents. The problem is that the fired casing won't extract, as in the extractor won't grab the rim. The fired casing is loose in the chamber and would probably fall out if the bolt was open and a guy hit the stock with his palm, of course I don't want to do that nor do I want to run a cleaning rod backwards down the barrel after every shot. I measured the rim of the cartridge and it's about 10 thousands smaller than 308 win. Any thoughts ???

Ok so I bought a prefit tikka proof barrel in 7prc. I bought Manson go and no go gauges to just check as I’ve read some issues online. Well go gauge dropped no issue but so did the no go gauge. Couldn’t find a Manson field gauge so I bought a Forster field gauge and bolt will not close. Thinking it’s good to go but I was interested in the measurements so got the calipers out and the Forster field gauge says 1.9080 but measures 2.015…the Manson garages don’t have any measurements but the no go is 2.036 and the go is 2.032…

All of this just isn’t making sense…it doesn’t close on the shorter gauge..wondering if maybe I need to order the Forster go and no go and check everything again? Just want to make sure I’m safe out there! I’ve put together quite a few prefit barrels and have never come across something like this.

So what ya grippin , I used to pack a 2.5 python with an IWB until the wife shot it once and said "i like this" . Now I have a SW 340 PD 13 oz loaded its a dream but brutal using 357 magnum loads these lil snubskis aint for target or plinkin ...jus put the front sight on low center mass at bad breath range and detonate twice .

Is there an app for android that allows you to range distance by using you reticle? There's one for apple but nothing for andriod.

Casey

Selling my complete rifle as a package with ~250rds on it. I am looking for 6k for entire package.

This package includes the following:

Geissele FDE 18" GFR Recce in 6 arc
Leupold Mark 5HD 3.6-18x scope with PR1-MIL FFP
Geissele 35mm cantiever mount
Huxwrx 6k supressor
Armageddon gear soft rifle case
2x 20rd mags, 1x 15rd and 8rd mag

**No suppressor cover, bipod or rail sections are included

Night force ultra mount 1.54’’H 0moa dark earth
Night force dive board dark earth
Night force NX8 2.5-20x50 F1 moa dark earth
$1900 for everything shipped!

A bunch of US Marshals in Phoenix AZ arrested and imprisoned a 66 year old woman. Was putting a rifle in her face necessary???

Turns out she wasn’t even the right person. The 70 year old woman they were after is still at large.

20” 6BR PVA barrel medium Palma
I bought it from Boiler up on here to set up a new rifle for the wife but my elk hunt is costing more than I planned on. Rifle only has 250 rounds on it
Will come with thread protector on muzzle

$950 shipped

5 20rd
1 10rd

$200 Shipped

mpa ba comp side rails with gray ops external weights
150 shipped

eastern NC

Marlin 1895gs 45-70 guide gun
It’s basically new with no scratches or blemishes
Manufactured in 2001 with a 99 prefix serial number
I added a leather sling and a pic rail for a HEX micro red dot included
$1600 shipped

Login to view embedded media
19:00 Miss ID. SSN that don't match, Signatures written the same... etc.

-Leupold Mark 6 3-18x44 Illum TMR 119214
-NIB Aadland Engineering Caps.
-Excellent condition.
-No trades needed.
-Zelle preferred.
-$2200 shipped ground.

Hello,
I was wanting to build another barricade to practice with. I currently have barrels, tank trap, skills barricade with a couple pipes in the middle that are 2" and 1", and a mobile barricade built into a collapsible sawhorse that I saw in a video. Looking for cattle gate ideas, and something to work on lower positions between prone and sitting. Any pictures of barricades or links would be greatly appreciated. Thanks!