Looking for a compact option for my Sig Cross STX (6.5 Creed) . Its a pack gun (gunslinger 2) . Only looking at the XT-MIL and the ZF-MRi versions of these:

LRP S3 4-24X50.
NX8 4-32X50 F1

Are there any standout reasons to not get one over the other ?

( Looking at the newest NX8 version out there to avoid the early reported eyebox issues.)

For hunting ( coyote and white tail ) and occasional steel out to 1k max.



Thanks for any reply.

7mm-300WSM 45° Improved, only 81 total rounds fired, consistently printed under 3/8" groups with both Berger 175gr EH's and 180gr Hybrid Target loads on virgin brass with no load development. The SRS Ti Pro 5-port almost completely removes recoil and is a pleasure to shoot. Never hunted, only shot at our outdoor 1400 yard range this summer by me and my 12 year old son, still looks like a brand new rifle in the case. Complete rifle package that comes with everything needed to make your own precision ammo. Will be an excellent lightweight LR hunter.
$4,000

Build Specs:
- Terminus Kratos Lite - LA
- Bartlein carbon fiber-wrapped, select match-grade 24" barrel with 1:8 twist for heavier bullets, M24 profile.
- SRS Ti Pro 5-port self-timing brake.
- Trigger Tech Diamond Pro Curve Trigger.
- Manners Pro Hunter w/Mini Chassis in Elite Tac GAP color, M24 contour
- Hawkins Hunter DBM and Hunter mag
- 7.7 lbs











Reloading Equipment
- 21st Century expander die
- 21st Century TiN .284 expander mandrel
- Whidden Precision FL Bushing die
- Newlon Precision Neck sizing die
- Newlon Precision Micrometer Seating Die
- .312 neck bushing
97 pieces of Norma 270 WSM brass:
- 81 fired
-16 virgin


The 7mm-300WSM Improved utilizes a 45° shoulder based off the 300WSM and 270WSM, which is shorter than the standard 7WSM. The benefits are a longer neck to support the longer heavier bullets and availability of good quality Norma and ADG brass, which the plain 7WSM does not have.
I make my cases out of 270WSM Norma. It doesn't get any easier, simply take the 270WSM case and run it through a 7mm expander mandrel (included). Then prime the case and fill it with the preferred powder for the bullet weight (N560 for the 175 grain Berger, H1000 for the 180)

American Rifle Company M-Brace
20MOA
34MM
1.26” Height

$210 Shipped

Up for sale is a small piece of history, In the early 2010's, CAG wanted .260 rifles to match their surgeon CSR's, SAC & Armalite came up with this rifle. This is a truly hand built, custom, semi-automatic rifle. For the ultimate in precision, performance, and exclusivity, the Armalite CAG Trials Rifle, a rare collaboration between SAC (Specialized Armaments Corporation) and Armalite, chambered in .260 Remington. This rifle was meticulously crafted for the demanding selection process of CAG, and to my knowledge, only four rifles were ever produced. If you're a serious collector, operator, or enthusiast, this is an opportunity to own a piece of military history. The rifle looks to be only test fired, there are a few small knicks and marks from being stored in a safe. The only other one on the market that I have seen, is currently for sale for $25k.

SOLD Shipped. Comes as pictured with a KAC 10rd mag.
Venmo F&F or bank wire only.

Please inquire for more information and pictures.

ALL SOLD. Selling 1180 620 rounds of Federal Gold medal Match. 620 rnds of 168gr and 560 rnds of 175gr. Asking $1500 plus shipping. Will split into 200 rounds lots for $240 plus actual shipping.

Looking to sell my Supertrickler Gen 1 with V3 firmware. Scale not included. Comes with all original packaging along with a cover. Works great it’s just an extra setup and doesn’t get used as much. Looking to get $575 shipped for the dispenser only.

I figure enough time has passed and jury is out on Peterson and Alpha brass.

Curious to know your experiences and if there is an edge to one over another.

I’ve got experience with Lapua among others, but zero experience with Alpha or Peterson.

Thanks fellows.

Selling barely used Vortex Razor HD Gen III 1-10 in box
EBR-9 MRAD reticle

Maybe 2 range trips put on it.
Spuhr SP-4016 mount (in box) also available

$1,600 without the mount
$1,950 with the mount

No trades please.

RimX Action
.22LR (22LR ultra chamber) Keystone Accuracy 26” MTU Barrel, 1/2x28 threads, approximately 600 rounds
1 magazine with extension
ATS Tuner - 1/2x28
No Trigger, can add a BNIB Timney HIT for $200.
The gold Triggertech Diamond pictured doesn’t come with this.
Groups very well with SK Long Range Match - I have ammo I can include in the deal.

600-700 rounds on the barrel - I don’t have the time to shoot rimfire and centerfire.

$1,500 FTF in South Carolina (SC Resident), otherwise through FFL.

A buddy and I have been tinkering around with some reloading recently and after a sort of expensive learning curve, we ended up finding the Mk316 Mod 0 recipe which worked perfect since we had a solid line of (relatively) cheap 175gr SMKs and IMR 4064. I was able to aquire some LC machine gun brass through a local shop that is all the same lot and then we've tried both CCI #34 and some Winchester military primers. The load has worked very well for us, landing about .75 MOA out of an LMT MWS and closer to .6 out of my custom R700. Honestly I'm almost comfortable using every component I have with this recipe, but the only thing holding me back from doing it is the fact that once in about every 10 or so rounds, I'll get a flier in a random direction that puts it at about a minute or sometimes a little worse. We're pretty exacting with our loading for our standards and what were expecting, cases all trimmed to within ±.002 case length, powder charge to the tenth of a grain, COAL measured on each round to be within a thousands or so. What would yalls best guess be for that error? Obviously there shooter, but between the two of us and 3 rifles, we can call our shots to be a solid string and still both end up with about that 1/10 figure. Maybe the brass has some inconsistency and we just discard that piece of brass for the next round of loading? I haven't been able to do more loading after firing it from our rifles, so maybe results will differ with a 3rd run. We're very much amateurs so any advice or ideas is appreciated.

This upper is in excellent condition, only has about 40 rounds down it.

- Aero M4E1 upper
- Faxon “match series” 12 inch 6 ARC barrel, 1/7.5T, 5R button rifled, carbine gas
- Suplerative Arms adjustable gas block
- Midwest Industries 10.5” combat rail
- Brownells bolt, don’t recall brand of carrier
- BCM mod 4 charging handle

$500 shipped for complete upper (lower is sold)

Shipping is to the lower 48 only where legal. PayPal or Venmo.

For sale. I bought this about 6 months ago. Super Trickler Gen 2 Software version 3.0.6. Bought from Super Trickler directly, not second hand. I’ve loaded probably 1500-2000 rounds on it paired to my A&D fx120i. It works great. No problems. Nothing broken. I just wanted to see what it was all about. Comes with everything that it should. I don’t have the original packaging anymore. 500$ PP plus however you want it shipped conus. Or face to face if you’re in the manatee county FL area. Cross posted.

Hey guys,
I recently removed my action from the stock to add some QD sling mounts. When I replaced it I noticed the action rocks forward and backward in the stock now. I’m not sure if it did or did not before. But I notice it now. Has anyone else had this problem and how did they fix it? Also is there any negative to using the wide bull barrel forend with a regular barrel? Thanks.

$375 shipped

It’s a prefit barrel for RimX action. Shot decent but I ended up getting a 26” barrel done for it.

In great shape. Lightly used. No big scratches or scuffs.
$290 shipped paypal, venmo, zelle


The RRS clamp is 175 if you can find them. The atlas is 295. 475 if buying new

Looking for load data for the Berger 85.5 for a valkyrie. Shooting ar platform.

3-15 x 44 CDX-ZL2 30mm FireDot Dublex (x2) 172368 - SOLD
3-15 x 56 CDX-ZL2 30mm FireDot Dublex (x1) 171390 - $SOLD Shipped
All are used but in great condition

Greetings all,

I'm selling a Nightforce ATACR C543, 4-16x50, second focal plane, 34mm tube. It has a Mil-R reticle, is illuminated, and has a zero stop. This scope was previously mounted and painted. There are slight ring marks visible and a few minor scuffs (like safe rash) which I have tried to capture in the pictures. The glass if flawless and the scope functions perfectly. Comes with the pictured caps, original box, paperwork, and tool. I'm asking $old shipped. Paypal F&F or Venmo is fine. Add 3% for commercial. Please don't hesitate to ask any questions.

*Heh, finally figured out how to add pictures w/o making a mess lol!

Edit to add: Previously rattle-can painted and I removed the paint.

I have a Brand New in factory packaging, U.S. Optics Anti Cant Device / Bubble Level up for sale. I bought this a few weeks ago and then picked up a Spuhr Scope Mount that has a Bubble Level built into it, so I no longer need this one as I am GTG with the Spuhr Mount.


Only $OLD Shipped.

Sig brace.

I have SBRd my MCX so no longer need it.

SOLD

Mpa built rife.

MPA branded Curtis Axiom short action with curtis conversion bolt
Uses Vudoo mags
24in comp contour 12 twist threaded 5/8x24
Threaded 5/8 w/ ATS tuner

Shoots under 1” at 100yds with the Eley match I have without tuning. It did really well with Lapua Long range as well.

$1550 shipped

Magpul Glock mags, haven’t used them in years.

As is- several marks from use

$90 takes all including shipping

5-21 round
4-17 round

Would prefer to sell as a lot

Make sure they’re legal in your state before buying thanks!

PayPal FF

I'm about to pull the trigger on a Henderson only issue for me is I'm not always doing large batches of brass. The most I do at one time is 200 to 225. I'm usually doing 20 to 50 usually. I use an older Lyman brass trimmer then use a drill to chamfer and deburr. My hands suck so the Henderson is the best one I found. I would use it everytime to slightly trim chamfer and deburr. I figure way more consistent but the batches I do I figured I would ask if there is anything else out there cheaper before I drop $1000.

Main caliber is 300 norma improved 35
30 nosler

Short action lcp model for 700 footprint has been painted but is new comes with 6 weights a thumb rest and bag rider hbar style forend. $1500 shipped

I have two slings for sale. One is a Rifles Only Bungee Sling and the other is a Tactical Intervention Specialist Quick Cuff sling with heavy swivels. Both have been used but in good condition and functional. If you wanted a good sling at a good price here they are.

Rifles Only Bungee Sling- $80obo SPF

TIS Quick Cuff- $45 SPF

Prices are shipped to lower 48. Will take PayPal F&F, Check or money order. PM any questions.