Brand new in box, never mounted Swarovski Z8i+ 1-8 with the BRT-I reticle and 34mm main tube. Comes with Ballistic turret.

Will be out of the competition shooting game for a while. Clearing out a few things in the safe I don’t use.

Bought this and only ran it for two nights during a coyote hunt.

Factory JP SCI-20
Proof Research Carbon 16” .223 Wylde Barrel
Full length top rail
Full length arca rail
Around 150-200 rounds through it.

$3200 shipped

If this is true the Labour Party plans to send some of their many shitbags here to campaign for Kackle Snatch & Tampon Tim

NIB, JV Innovations SBR Dovetail Adapter. This works with the InfiRay RH25/PFN640+ thermal to clip into the Wilcox Flip To Side mounts. These are sold out at the moment at the only US distributor. $120 shipped, no trades.

Like new only used 1 time.

$275 shipped ups ground

I am looking to get a pair of NL Pure 12x42 binos and would love to save money. I can get 10% off retail at Sportsman's Warehouse, but I would like to save more than that. If you have a valid Swarovski Certificate for a significant percent savings at a reasonable price please send me a PM and we can discuss. I could really use them for Elk season in November, so time is of the essence. Thanks!


Don't PM me if you don't have buy/sell privileges on SH and good feedback. I have not been scammed on here yet, and I don't intend to start, much appreciated.

Apparently, Badger is out of stock of the EFR if anyone has any, I'd take 10 to 15...

Thank you

Mike R.

Gen 2 vortex razor 4.5x27. It is an MOA reticle. Has some rubs on it from the safe. I tried to capture them in the pics. $1450 shipped

I recently purchased a Zeiss LRP S5 5 X 25 scope. Really happy with the scope, great glass, love the turrets and reticle. However, after sighting the rifle in and setting the zero stop the elevation turret marks did not line up with the delta indicator. I contacted Zeiss and they had me send it in. They sent me a new scope with a turn around time of 8 days including shipping both ways. Excellent response time and communication throughout. I guess you can argue it probably shouldn’t have shipped like that, but they certainly took care of the issue very quickly.

Here is a short one with them running a 308 Win at 1150 but they do a lot of 2000-3000 yards videos as well.

Login to view embedded media

I have a pile of CFE 223 and just got a bunch of the 73's. Been trying them in a new barrel and getting pretty horrible groups. I'm going to try some Hornady factory match and factory 55gr VMax ammo (has traditionally both shot very well for me) and see if it's the barrel or the bullet/powder. I had some leftover 75gr HPBT loads that shot 1.25-1.5" in my old barrel (10.5") @100yd. This barrel threw them around 3-4", so I'm kind of suspecting the barrel. ETA: New barrel is a Seekins Precision 16" 5r 1:8 twist.

In the mean time I'm curious to see if anyone else has had success with this bullet/powder combo. I'm not looking for gnat's ass, but if I could get 10 rounds under 1.25" @ 100yd I'd be very happy. Right now everything has been 1.75-3.5"

Hello to all!

I've some 2nd hand 6,5x47 Lapua brass that I received with my rifle, but I don't know how many reload was passed before I started to use this.

Now these cases show, at .200 line, measures greater that the standard SAAMI and measures obtained resizing the brass with a Forster FL Bushing die.
When, after FL resizing, I insert the brass on the chamber, close the bolt and after open the bolt whe have a click/clickering at the up of the bolt.

I read on the Net that the cause of the increasing of the quote at .200 line are a sign t'ha the brass are at end of is life, lost primers, head separation, bla bla bla...

Now I ask if are some remedy for this problem.
Ring die?
Small base body die?
Recicling bin?
Other?

Thanks, Camillo

Selling this brand new scope. Was going to put on an AR10 but decided to go another route. I removed the shrink wrap to check it out but never mounted on a rifle. Comes with all accessories in the box.

Looking for 400 shipped/insured USPS priority lower 48 states. Venmo/Paypal

I bought this tripod and used it for one NRL match and to hold some binos at the range. I haven’t used it in about a year, and am just trying to clear out some space. Everything functions perfectly, it’s lightweight and stout! $175.

Not interested in any trades. Thanks!

For those of you that have bore scoped your T1X, how was the bore finish and is it accurate ? my T1X looks pretty good, few tool marks here and there and it does very well in the accuracy dept. The reason I ask is a shooting buddy brought his T1X over to bore scope it, his is very accurate as well, probably more accurate than mine. The bore in his had a lot of tool marks, the leade has some small smears to and in the bottom of the bore it looked like it was sandblasted, full length of the bore, the upper half of the bore was smooth and shiney, his rifle has 5000+ rounds through it. Goes to show you cannot tell how a barrel will shoot by just looking at it. Your input appreciated.

-VG6 Epsilon brake 1/2x28 $45
-EGW Tikka T3 rail. O moa sold
-silencerco Octane piston for 40 cal 14x1lh $50
-silencerco Octane fixed mount 1/2x36 for colt 9mm ar rifle or sig MPx $50
-AAC tirant 45 piston 16x1lh $50
-Dead Air Armament HK mount for Wolverine suppressor. 15mm RH. $50
Thread adapters 1/2x28 to 5/8x24 $30 ea

ships usps flat rate for actual cost

Sold

Was mounted and made a trip to the range, has about 50 rounds through it. Got a great deal on another scope and going a different route. Tracked great out to 1000 and back.
$550 TYD
*Add $300 for area 419 mount
Trades accepted:
-Rem700 clone short actions
-Other optics, can add cash on my end
-6mm 109 Grain Berger LRHT’s
-Rem700 stocks/chassis

Hey everyone,

I’m working on my first AR-15 SPR build and need some advice on which barrel to choose. I’ve narrowed it down to a few options, but I’m having a tough time deciding. Here are the contenders:

1. Rainier Arms Ultramatch MOD2 .223 Wylde MK12 SPR AR-15 Barrel - 18" Nitride - 420$
2. BALLISTIC ADVANTAGE AR-15 MODERN SERIES 18" Rifle-Length Barrel SPR w/ OPS 12 - 320$
3. WHITE OAK ARMAMENT 18" Rifle SPR Barrel - 630$
4. CRITERION BARRELS INC 18" HBAR Contour, Rifle Gas System, .223 Wylde - 570$
5. CRITERION BARRELS INC SBN Barrel .223 Wylde 18" Rifle-Length - 570$

I’m located in Switzerland, which explains why the prices might seem a bit high compared to what you’re used to in the States.

I’m looking for something that will give me most accuracy at distance. (think 500+ yards)

Any insights on these options? Does anyone have experience with one of these barrels, and how do they perform in terms of accuracy, durability, and overall quality? Or should I consider a different barrel altogether?

Appreciate any help or advice you all can provide!

Thanks!

Letting one of my BA’s go. This is a Defiance Tenacity with the integral recoil lug. Action has about 1200 rounds on it as does the barrel. It is chambered in 6.5 CM. The barrel is a 29” Hawk Hill. I don’t know what they call the profile but it is like a Heavy Palma profile. This is set up on a Bug Nuts system. The Nut shows some tool marks because I didn’t have a Bug Nut wrench when I installed it. Other than that, BA is in overall excellent condition and shoots 140 Hornady’s like a laser. The action was manufactured by Defiance for Nomad Precision out of Kentucky. I will sell the action and barrel separate. $975.00 for Action and $200 for barrel or $1100 together. These prices are shipped and insured. If you have any questions, feel free to contact me. Thanks.

Will email or text a pic of the cert
No expiration
$350
I can only accept Zelle, cash app, usps mo, cert check

How are the current production T1Xs performing ? I have to early ones that do great and am thinking of picking up one of the latest ones with the new type ejector. TIA

Thoughts on these new Strasser straight-pulls? The RS700 builders action looks affordable and is based off Remington 700 footprint. Straight-pull action with all the customization barrel and stocks that I want... sounds good to me! Anyone have experience with them?