Hello all,
I am selling my 5" Prodigy. Included are 4 factory mags (1-17 & 3-20), 10-8 guide rod, spring and slide stop, as well as a Blackpoint Tactical OWB holster.
This pistol runs like a top with any ammo I have thrown at it and shows almost no signs of wear. $1000

Cash, PP, Venmo, Zelle accepted

Perfect condition, not quite big enough for my Leica 8x56. $40 shipped Venmo or paypal friend

Audere adversus mount 34mm 0 moa excellent condition 180 shipped PayPal pal ff or venmo

Login to view embedded media
But she can keep her job because they have a LIST for known pieces of shit .

This is still fall out from those pigs that let an ex girlfriend kick open a door of a house she used to live in and then followed her in and arrested/electro tortured the new occupant of the home .

Entering a home with out a warrant ; allowing someone to break into a home they do t live in , false arrest and false charges filed and tortured a handcuffed man - no longer able to testify in court - but still on the job. Means the entire squad bay is fine working with her and entire command structure could care less that she’s a liar and like to torture people .
I wish some of the “good un’s “ I keep hearing about would make an appearance

As the title says - looking to sell this Vortex Razor HD 5-20x50mm. EBR3 MRAD reticle, Badger Ordnance 1.40" rings, and a bubble level included. Scope is in great condition, with only some exterior nicks. In preparation to sell/trade it, I had vortex replace the eyepiece and objective assemblies, and verify the functions of the entire scope. The glass is flawless. No box.

Asking $1300 OBO, or trade.

Willing to trade for the following (Plus or minus cash, depending)
Nightforce NX8 w/ FC-DMX reticle
Leupold MK6
Leupold CQBSS MK8 1.1-8

Geissele 5.56 Heavy Barrel .750 Gas Journal, 14.5” length. Also comes with a Geissele Gas block and gas tube. All brand new never used or installed.

$300 shipped


8 Magpul M3 5.56 20 round magazines. Brand new with dust covers. $90 shipped

5 Magpul M3 Windowed 7.62 20 round magazines. Brand new with dust covers. $100 shipped

$175 if you want all of them.

PayPal FF, Venmo or Zelle

Apparently there has been a school shooting in Sweden

Login to view embedded media

Swapped over to a different mount.

$420 shipped

Looking to sell an extra set on ARC M10 rings

These are 35mm 28mm-1.10 MED rings.

$110 shipped PayPal f&f or Venmo

Have a proof SA take off stock 700 footprint short action. One of the lightest stocks out there. M5 bottom metal cut. Stock $650
Bottom metal and stock $850 like new condition.
The stock is just under 20 oz. Depends on what bottom metal hawkins Short action is 2.4 oz

I need a standard Raptar ES cable, not the lite or Y trace cable, just the standard one.

Thanks!

Another one from the back of my safe - a lightly used (fewer than 50 rounds fired) Staccato CS in like-new condition. This has a DLC-coated barrel, and includes a Trijicon RMRcc with the corresponding optics plate (iron rear sight plate also included but not shown), total of four 16-round magazines, and all original accessories and documentation.

$2500 shipped. I am not interested in trade offers. SPF!!!

So I have a blued Tikka action which was previously spray painted. I'm not saying I'm the one who spray painted it, nor am I saying that I am not the one who spray painted it. In my infinite wisdom I removed the spray pain with mineral spirits and a soft buffing bit for a dremel. Worked like a treat, except that some of the bluing is wearing off and I can see streaks. Over the next x months / years, I'm going to be building a new precision rifle for PRS off of this action, but would like to avoid rust (and ugliness, for that matter).

What would be the recommended way forward? There is (as of now) no rust of corrosion, the action is great. I'm hesitant to have it cerakoted due to concerns about QC and having a truly flat surface at the top for a rail. I could also just get one of those bluing kits, I suppose - haven't done that before, but I'm guessing it would take it back up to factory standards?

Thoughts are appreciated!

P.S. I've heard Tikka say that all of their actions are SS and I've also heard otherwise. Would this have an effect on the bluing process? If there are a couple of materials possible in my action, how can I tell which I have?

Gently used Element Nexus Gen 2, 4-25x with the APR2D tree reticle. Has the new tool less turrets like the Theos.

Comes with original packaging, sun shade, ARD, neoprene etc etc.

$1525 OBO shipped and insured
PayPal F&F, Venmo or Zelle

Trades: atacr 7-35x Mil C or NX8 4-32x Mil C

Krieger barrel chambered in 6BR by Modacam custom rifles for impact or lone peak. MTU contour 26” 1-7.5T Has 1800 rounds down it using 105 hybrids and 29.6gr varget $175 shipped

New MPA Vanquish 700 SA LH in Gunmetal with Competition buttstock includes evg and swept 2 grip and 2 NV Bridges $sold shipped

Also have weight kit available for it

Although he was not mine, he was a much favored "Cyber Pet." We received word this morning that "K'eyush the Stunt Dog" a "Huksamute" living in the UK, crossed the rainbow bridge on 02/03/2025. I guess his best pal "Sherpa" couldn't wait any longer and summoned him up there. Now, they can both run free, and banter with each other.

The owner, Jodie, put out this video:

Login to view embedded media
Rest Easy buddy. You and Sherpa can be in Heaven and tear it up!

Several items for sale. Payment accepted is PPf&f (no comments), Zelle, or USPS money order. Insurance extra.
Not looking for any trades at this time.
Make sure your FFL will accept from an individual.

1. RRS TVC 33X with Anvil 30 - This is a MK1 version. Some cosmetic scuffs on the legs, does not affect functionality. Recently cleaned and greased, all springs in the locks replaced last year. Anvil 30 is like new. 61.5in tall at highest position. SOLD.

2. Foundation Centurion - RH Terminus Zeus SA inlet, with Hawkins M5, brass weights and full length ARCA rail and action screws. Standard fill. Slight scuffing on the bottom butt - See pics. SOLD

3. Trijicon RMR Type 1. 3.25MOA with pic mounting base. Needs battery CR2032 works as should. Nicks on top left of sight captured in pics. SOLD
Will ship in Trijicon box with accessories, but this is not the right box for this unit.

4. Bartlein LHGT 1:8.25 to 1:7.5twist M24 profile 6 creedmoor. Barrel chambered by Bugholes for Terminus Zeus QC. Threaded 5/8x24. 398 documented rounds down the pipe. Factory ammo only. SOLD

5. Tangent Theta 5x25x56 Gen3XR Reticle - Scope has always been wrapped in vet tape. comes with original box, scope chaps, Anarchy Outdoors throw lever and all factory accessories. $3700

6. ARC M-Brace 1.5in 34mm 20MOA scope mount. Like new - SOLD

7. ARC M-Brace LRF bridge. Like new - SOLD

8.Terminus Zeus RH SA magnum bolt. New without box- $375

9. Kahles 56mm sun shade. Will fit TT. New in box. SOLD

10. 3 MDT mags. 2 10rd with 419 extenders and 1 12rd. SOLD

11. 2 Tab Gear 40rd SA bullet binders. Multicam. - SOLD

12. Tab Gear magazine holder. Black multicam. $35

13. Pic rail data card holder w/cards. $40

14. Kestrel 5700 Sportsman w/AB. Can be upgraded to Elite. Missing the body attachment to use with weather vane. Otherwise great condition. - SOLD

15. AG pint size game changer, heavy fill. No rips or tears. Black stains on one side. - SOLD

16. HFB SOPHS w/kydex sheath. New w/o box. - $235

17. GA Precision Templar V2 6.5 creedmoor barreled action 1:8. GAP 6 contour (Remington heavy varmint) threaded 5/8x24. TBAC CB included. 371 documented rounds. SOLD

18. BNIB CDG Short action RH, .378 bolt face, 20MOA, fluted bolt, red pivoting handle. - SOLD

19. BNIB CDG Long action RH, .535 bolt face, 30MOA, fluted bolt, red pivoting handle - SOLD

20. BNIB CDG action wrench. Option to person buying an action. SOLD

I just saw a facebook post by GA Precision about Bartlein offering carbon wrapped barrels. This should be very interesting....... Anyone else see this?

Pure Precision SKLTN short action regular bolt face for sale. 20 MOA rail included. $950 shipped.

30 rounds down the pipe. Includes all that is pictured. Purchased new. Bought a whole rifle so no longer need the upper. Includes BCG and charging handle. 450+shipping. Relisting due to deal falling through.

Having a few extra parts sitting around has turned into building another upper then getting a lower for it and having an extra rifle I don't actually need too many times. I have more ARs than I need and this configuration is redundant. I also have some other AR parts stilling around so I don’t mind swapping a few things to align to what a buyer is looking for.

• 16” 5.56 Ballistic Advantage modern series barrel with mid-length gas port, 1-7 twist and black nitride coating.
• Adjustable gas block
• Tool Craft BCG with black nitride coating. C158 bolt that is MPI, staked gas key bolts, etc.
• ALG Defense 13” M-LOK Ergo free float hand guard. I have a co-witness rail section for it for adding a front sight.
• Strike Industries chagrin handle.
• Muzzle brake(I think it’s Strike Industries)
• PSA receivers. Lower was purchased as a full MOE lower with their EPT fire control group.
• Magpul MOE stock
• Magpul K2 grip(I swapped from the MOE grip)
• EPT fire control group: Polished and nickel boron coated trigger parts
• Currently has a Vortex Strike Eagle Gen II 1-6 scope on it zeroed at 50 yards for 75gr Hornady BTHP
• Scope in Aero Precision mount
• I'll include 1 30 round mag

ALG hand guard, strike industries charging handle and Vortex scope were used on previous rifles but everything else was brand new with just one range trip to zero it with only about 20 rounds fired. It shoots well with 1/2-3/4" group at 50 yards when zeroing with 75 gr Hornady BTHP.

$750 for the full set up with scope.
$500 for rifle with out scope.

I can reconfigure with a Sig Romeo 5 red dot and/or some Magpul Mbus flip up sights if the buyer prefers that. I can also swap in a CMC or Rise Armament trigger if the buyer wants for a little more.

Can only ship to an FFL and to a state where this is legal. I have a local FFL that can act as a shipping FFL for a small fee if your FFL won't accept shipments form an individual.

I am looking to buy either 2400 or Accurate#9 as both are available to me locally. I already have H110, LiL Gun, Titegroup, and CFE PIstol in large quantities, but I am wanting to try another powder just for the fun of it. Just looking for opinions on which and why in the calibers I will be using it in. I am looking to use this new powder choice in 357 Mag, 45Colt, 41 Mag and possibly 327 Fed Mag. Thanks!

Look like a worker got pissed off at the illegal aliens working in the warehouse. Too bad his aim sucked that he didn't do enough!

Login to view embedded media

There will be a Precision Rifle Zero class held at Pigg River Precision in Rocky Mount, VA on March 7-9, 2025. Class is put on by The Left Edge Society. They are made up of three guys. 2 Active LE Snipers and 1 national level long range competitor. This is an intro to Precision Rifle course that focuses heavily on fundamentals and the basic knowledge of precision rifle shooting.

They are also the only company in the Northeast supported by Kestrel Ballistics with a full compliment of loaner kestrels for every student in class.

Day 1 is Friday evening classroom. Day 2 & 3 is all range time.

More info on this and other classes here
www.theleftedgesociety.com