Leftover from a project that never got completed.

I have 10 of them, all 15" long. Inner and outer dimensions in pictures.

SOLD $100 for all of them. Or $12 each. Price is shipped.

Right hand Defiance Anti-x black nitrite SA 6.5 PRC rifle. 22" proof carbon sendero Defiance Prefit. 7.5twist. Black Canyon Customs did the cerakote on proof barrel ends black to match action. TT 2 stage special trigger. Pro flat curved. TBAC CB brake on it. Carbon AG composites stock (Has pillars in it) with M5 bottom metal, Arca plate, and pic rail. Accurate WSM magazine. Rifle has shot my 156gr handloads in the .2s many times. Shoots factory 143gr Eldx and 143gr Bondstrike well too. This rifle just went with me to Mexico for a Coues Deer hunt and it worked extremely well on two deer. Rifle has under 300 rounds on it. Over estimating as I don't have an exact number. It's closer to 200 however. Rifle is 7.26 lbs without magazine.

$Sold delivered. Venmo, zelle, check, will consider PPFF. No CC on this one as it's a personal rifle of mine.

My next scope is a different size tube. No need for these any longer. Any questions let me know. They are in perfect working order. Theres some leftover loctite on the screws otherwise they look close to new.

$110 shipped to the lower 48

Bottom metals
Tac adj cheekrest mech
Grips
Mags
3rd- sm and med
5rd- med x2
Buttpads
3-lite compacts
5-standard t3x
1-limbsaver t3x
Everything in picture for $SOLD shipped priority mail. Feel free to ask questions. Venmo, zelle, usps mo only.

-308 ctr 20” Shot approx 60rds before being removed.$sold

Feel free to ask questions. Venmo/zelle/usps mo only. Thanks.

WILL NOT SELL ANYTHING SEPERATE UNTIL BARREL SELLS……

Bought this for an elk hunt that didn’t happen and will be years before another opportunity comes up.

Round count is 35, 20 factory hornady and 15 handloads to check pressure/velocity.

24” carbon proof for Zermatt / bighorn Origin. (Will not come with CB brake)

Forster full length sizing die and micrometer seating die.

297 starline small primer brass. 159 once fired, 55 new but mandrelled, 83 new untouched. ( I bought the brass off here and only fired 15 pieces through this barrel, the rest was fired by the previous guy)

For the above I’m asking $925 dropped to $800 shipped CONUS.

EXTRAS:

CB brake $120

762 Hornady 140 ELDM bullets
52 hammer 124gr solid copper
$325 for all bullets.

Open to trades toward 9mm pistols or other stuff.

New in Box Spuhr SICS Chassis. Model CH000001, REM 700 SA, Black, 16” Forend

$1400

Please PM me if interested. Don’t reply to this post saying anything, scammers will PM you and try to get you to pay them.

Vortex Razor G3 6-36x56mm Mil

Brand new, opened, installed throw lever, then threw back in box. Never mounted on anything. Decided to go ZCO

Forgot to include in photo but two turret tapes are included

insured
Or
local in South Texas

99 Alpha 6 Creed LRP brass once fired. $75

This is my old patrol rifle. COLT LE6920 with 16” barrel and carbine gas. I’ve planned on selling it, but I just don’t like selling rifles. It has the LE/MIL restricted markings. I’m definitely not interested in an MK18 clone. I’d hope for something at least 13.7” I’m opening to cutting down the barrel or swapping it.. or even converting to piston. Barrel probably has less than 1k rounds through it. I’m really just looking for a cool clone look perhaps with one of the DD RIS rails. It’s just so boring. I’ve got a 14.5” piston that is awesome. Also open to maybe using a different caliber? It’s purely the look I’d be interested in.

Hodge upper receiver that still needs a forward assist installed. Triarc 13.9” TRACK 2.0 barrel with pinned Triarc gas block and midlength tube. ADM 13” rail. Strike Industries Charging Handle and ADM BCG. No rounds through any of it. FYI, it was a tight fit on my lower. $650 with the BCG/CH or $550 without them.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-A.R.M.S. #22M Rings

150.00 shipped

Going to hit a 22 match for fun this weekend and to stress myself out it's with zero prep. Anyone have a BC for SK Rifle Match or Wolf Match Target? I can confirm velocity when I zero in the morning but before then I'll have zero chance to check anything. I've seen for the most part 0.132 is the best average but saw people using as high as 0.170.

Past velocity:
SK RM: 1003, 74.1es, 18.1sd (20 round string)
Wolf MT: 1083, 28.9es, 8.5sd (20 round string)

My preference is the Wolf MT, been most consistent/accurate but my next best that I have enough of is SK RM.

Selling a new Schmidt and Bender 5-25x56 PMII with DTII+ turrets and H59 reticle. The scope is in flawless condition and will come as shown with scope caps, no factory box.

Link to scope details HERE.

SOLD

No trades please.

Stoopid bitch leaves her gun in the restroom of an arena. The chief says that she's a good girl and will be punished. Punishment entails of being promoted to overseeing the training of other officers.

Selling a like new Vortex Strike Eagle 5-25x56 with the EBR7-C Mrad reticle and turrets. The scope is in near flawless condition and comes as shown with Vortex Pro 1.45” rings and the factory box.

Sold

No trades please.

Brand new in box never opened


Sold shiconus

I planning on picking up a thermal clip on in the next few months.

I’ve been looking at the RH25v2. I see that used UTM-X are selling for not much more than the Infiray.

Does anyone have time behind both of these? How do they compare? Or do they?

I’m concerned mostly with IQ and detection range. Which one supports more mag?

Any other factors to consider to help make the choice?

I’m aware that the UTM is 10 years old and has no warranty support, but maybe it’s less likely to need it?

I was looking into optics options for the barrels from the Armalite Deals thread and noticed this (obvious) glitch on Optic Planet's website.

This same scope is no less than $249.99 anywhere else (namely, Natchez SS).

Obviously $83.99 is a pricing error. Obviously this order will never be fulfilled, right?

I know many have Optics Planet horror stories. They've never done me dirty, and they don't actually charge your account until the item ships. Oh, and it let me use a discount code.

Nothing ventured, nothing gained.

Howdy
Own an 338 RPR since 2019. Over 1200 rounds thru it, accuracy still sub MOA however I am waiting for the barrel's final demise. I see LRI offers a barrel and the recommended tool. Anyone else? Patriot Valley Arms makes a prefit but the RPR receiver is not configurable (AI, SAVAGE among others are available.

My preference is to perform the swap. Already familiar with AI AE and AT.

Thank you

Does anyone know where I can get the spotting scope filter/cover for the Badger SLICK system on a Leupold mk4 60mm spotter? Badger has had them on back order forever.

BNIB Hawkins 1 piece 36mm mount 1.27 height $325 shipped

Hide,

I have a handful of ARs, but looking for which of my two suppressors to put on a .300 Blackout 8.5 inch. I have a TBAC Magnus I run on my bolt guns, and a Huxwrx Flow 7.62 TI that I run on my ARs. However, I have an 8.5 inch AR pistol with a brace/JP captured buffer and adjustable gas block and I’m not sure what to run. It seems the hux may not perform as well with subsonics, so I’m wondering whether I should throw the Magnus on and adjust the gas down.

I could experiment a bit, but figured I’d come to folks with more experience. Rig has a 1x red dot and would just be mostly plinking and some transition drills.

Thanks in advance.