Brand new unused Vortex Ridgeview Carbon Tripod with Pan Head. $375 Shipped.

Desert Tech 34mm 30moa scope mount . It's extra really to clear a mono upper as found on DTA rifles. 30moa cant, mount is in great condition with only a couple very light marks and no damage. Selling for $100 shipped tyd.

Great mount, used for a while on my ar but I'm going to a taller mount. Excellent condition despite its use, no marks or damage noted. Priced to sell, $100 shipped tyd.

Login to view embedded media
And the police show up and shoot her and her dog. It was a banner day for the blue line !

I was looking to buy a modular die. Sac is closed on the weekends so I’ll ask this here.
Is the decapping expanding mandrel included with the modular die? I’m assuming not because there is nowhere to input the size you want based off sac calculator.
Also do I really need the sac wrench or can rubber coated vise grips work?

Have an original 221xxx receiver that has had its U.S. stamping removed. Looking for vendor suggestions to return the stamping to its original location.

6mm black nitride
6.5 stainless

Brakes only
No adapters

$100 each including shipping.

Morning All
Has anyone been to this school in WV,, Razorback Tactical ? Thinking about attending in the spring. Just looking get any feed back. I attended a shooting class in VA last Fall which was a total waste . Don't want to make the mistake again ..
thanks

Currently running a Schmidt & Bender PMII 3-20x50 on my Sako TRG 22 (6.5 Creedmoor) using a Spuhr ST-4701 (35 mm height, 7 MIL cant, direct to dovetail).

I recently bought a Seekins SP10 in .308 (18” barrel) and I’d like to run the same scope on both rifles.

I’m considering switching to a Spuhr QDP-4602 (34 mm tubering, 38 mm height, 6 MIL cant) and installing a low-profile 0 MOA Picatinny rail on the TRG.

That would let me swap the PMII between the two rifles using QD, and use marked zero offsets.

⸻

My questions:

1. Do you think this is a solid plan or would you recommend running two separate optics instead?

2. Is there any practical downside to the increased scope height on the TRG (from 35 mm to 43 mm centerline)?

3. Any experience with RTZ performance using QDP mounts across bolt and gas guns?

Appreciate any thoughts or feedback!

*WTS- 300 Sherman Short- Kinport Peak Rifle Custom Build* B chamber

~Manners T2A with Gen 2 mini chasis

~Terminus zeus action with full length threading and mag bolt.

~Trigger Tech Dimond trigger

~26" Dracos barrel- 125 rounds

~Area 419 14" arca rail/barricade kit

~Area 419 338 Sidewinder Mag Brake (I went with the 338 brake because it fit the barrel contour better).

This rifle was build by Kinport Peak Rifles here in Idaho. This gun is an absolute tack driver, the only reason for selling is because I have two 300 Sherman Short builds. The purpose of this build was having a hunting rifle capable of taking elk at long ranges with a very manageable recoil impulse. Both of my girls have successfully harvested elk with this set up.

I would prefer to sell the rifle as a whole, but I am open to parting it out as well.

Over $5k invested in this build. Im ask $3,400 plus shipping to your ffl.

As title states looking for a used but in good shape must have clear glass Midas Tac .. might go for a 6-24x50 APRS3 as well
PM what you have please and price

I don’t normally ask for stuff on here because of the scammers, but I’m 2 margaritas too many and am taking a chance.
Looking for an Aimpoint Duty RDS.

Let me know what ya got.

Selling my mount, FDE model. Works perfectly. Only cosmetic blemish is the lettering on the side.

$125 shipped CONUS

Originally from Arkansas in Maryland for the time being. I've collected a decent little collection with a dream of adding a BMG in the next year or two.

I sent my custom 457 barrel to Whidden GunWorks for ammo testing and just got the results back, to say I am not very impressed is an understatement. The ammo being used is Eley Tenex.
The testing distance is set at 50 meters and the group size is in mm, my calculation shows at 50m, this is not even an MOA barrel.
I am a newbie at this, will appreciate if anyone can help me make some sense out of this results.

6390 RDS for 4.4" Staccato P and SF X300U. Includes QLS fork, UBL and Nub Mod.

140 USD

Price includes shipping.

I installed this and prefer my trigger tech. Literally brand new
$265 shipped

Located in southern Utah but go between Vegas and central Utah for matches a decent bit. Going to be at the nut crusher prs match in price, UT next week.

Have 3 lbs of H4350 and 3 lbs of H1000. Looking to sell them together for $150 for each 3 lb bundle.

Edit to add: looking to sell local and willing to coordinate to meet up at matches

Excellent condition. Includes Tenebrex caps and parallax spinner.

2250 shipped.

I can do a linkup on the Front Range within reason.

Thanks

Nick

New in the FN soft case, had a customer use this as payment for a pup from our kennel.

Pistol $2600
Optic $500

Shipping conus my dime, insurance on you if you want.

Will entertain trades for a MP5 pattern 9, dj have this listed on a local Houston forum if you see it there.

Moving along my placeholder action. Lilja barrel, chambered in 300WM by Red Bull Armory. RR prefix action, Timney hunter trigger (if you don’t want this I’ll drop $75 off the price). Has some wear and a few dings on the barrel but looks the part. Round count ~25. 6-48 scope base screws, bolt serial doesn’t match the action (but is the bolt Red Bull built the BA with).

$975 shipped. SOLD

I would like to sell or trade my 35mm Area 419 1.54” 20 MOA Full Cantilever Once Piece Scope Mount. My Leupold MK5 was test fitted to check for eye relief on my gas gun due to my LOP requirements I need the mount to sit a little further back for proper eye relief.

It has not been torqued or used for live fire, it has just sat on my work bench.

$300 cash shipped, OBO.

Willing to trade for a KRG forend, or KRG night vision bridge with some cash.

I been researching the FRT triggers tonight, seeing they are legal again. I see there is a "super safety".... but I dont want anything plastic and I am not interested in a push/pull safety option. kicking around the idea of buying an FRT but has to be 3 position, safe, normal firing, and then forced reset. Who makes the best solid one with nice trigger pull and reliable?
Researching i found Rare Breed..... but I found several websites for Rare Breed... and posts on redit saying some are fake scammers.
Anyone know which one is real? Cant find them on facebook either.

I think this one may be real - .rarebreedtriggerus.com

Then there is this - rarebreedtrigger.org

and this - rarebreedtriggers.com

and - rarebreedtriggersco.com

and - rarebreedtriggerfrt.com

Just a quick review and pictures of the completed work on my STI Edge by Vulcan Machine Werks. I spent quite a bit of time looking around at shops before deciding on Vulcan, so maybe this will be helpful to others.

In short I am very happy with the work done on my STI. I had stopped shooting it as much in favor of my CO pistols and after shooting a friends MPA 2011 with an optic I decided I wanted to look into getting mine cut. Unfortunately because of the very low cut STI made to fit the original dawson adjustable rear, most standard red dot cuts would not work due to the amount of material available. Eventually my research brought me to Vulcan, who after discussing over the phone with one of their machinists, said that they were not concerned due to their plate system being compatible with the older STI slides and they had done many others.

After 14 weeks, I got the pistol back and the results are exactly what I wanted. The 1/3rd cowitness backup sights are solid quality, but sit nicely out of the way. The SRO looks great and shoots great on this pistol and I can track the dot during cycling. This gun was always phenomenally reliable beforehand, and the work rendered hasn't seemed to affect this (only had time to shoot 300 rounds through it last weekend).