Almost new condition. Asking $75 shipped.

Purchased scope recently selling this one as im going with a different model.

NF NXS 3.5-15x50 zero stop HS turrets npr2 with moa adjustments. $1300 shipped OBO

FS NIB Vortex Viper HD3000 Laser Rangefinder.

I received it yesterday from Vortex as a warranty replacement due to breaking the 1/4” mount. In the meantime I have transitioned to rangefinding binos and don’t need it any longer.

$315.00 shipped CONUS.

Thanks for looking

I have zero experience. Must do it myself. Want cheap and easy install if at all possible. Would pay more for easy install vs. cheap and difficult install. Not a fan of the confetti type textures but definitely don't want a slip hazard.

*Brand new concrete.


Go...

I have the 4 port LMT brake with xeno mount. I was noticing that the end of the brake was shiny and the first baffle in my scythe ti was also. Investigated it and realized that it was not able to fully seat on the taper. I can either cut the brake down to a 3 port( i wouldn't think this would have any effect on accuracy) or they sell a single port, don't really want a single, but may have to.

Selling a slightly used SLR set screw 0.875 gas block.

Asking $50 shipped

So, I purchased this scope brand new and has lived its entire life on a 338LM. It has tracked very well; the glass is excellent, and I have had no problems with target engagements out to 2800 yards. It has always been mounted in ARC M10 rings (as shown, included) and shows very little to no ring marks. Includes the scope, rings, sunshade, and Alumina Flip-Back Lens Covers (119737 and 117611). Feel free to ask any questions or request additional photographs.

$2000 $1900 shipped CONUS. PayPal F&F preferred, but I will cover the G&S fees if the buyer wishes to go that route. Other payment options can be discussed, including Venmo, Personal Check, MO, etc. Checks will be held until clear or cash in hand.

Specs:

Looking to sell my Leica spotting scope. This is a 65mm straight body with 25-50 eyepiece. I bought it brand new and it has lived in a pelican case it’s whole life. I only use when instructing rifle classes for calling hits on paper. I have never touched the glass and it has been babied. Not a mark on the body or the glass. Only selling to go angled so students can use it easier. Fantastic clarity and brightness.

$2200 shipped to CONUS. Zelle, check or money order.

Hi Guys,

I've been having inconsistent accuracy with my PWS diablo. It range from 5" to 7" spread at 100 yards.
Ammo I used Golden Tiger, Barnaul and Belom.
Sometimes it would shoot to consecutive rounds side by side then on the third and fourth it would fly to extreme right or left it seems I can't to get it to group tighter.
I read PWS upper are accurate but not mine. Is this inherent to PWS 7.5: barrel?
What can I do to make it accurate?

I've been really thinking about upgrading my razor gen 3 but not sure if it's worth the squeeze. Richard from CST pointed me in the direction of the zco527. This is a lot of money to me to drop on a scope so I figured I would ask the hide there opinions and people who have both or have the higher end of scopes. I've been around ATACR and looked threw a zco 5 years ago for like 1 min so I have no experience.

I shoot elr style matches that's it. I like the razor gen 3 but this is the only rifle I own and so I figured I mine as well have the best I can can since I'm limited to 1.

Who made this?

I bought two of these and didn't use. $140 Shipped.

Geissele Single Stage BG-RF (Same part# 05-275 and specs as the current model is BC-G Competition Trigger). Brand new in package.
Built to deliver a crisp, consistent break with a light pull weight, providing the precision required for competition shooting. Can be set up with a 3.2 lb. or 4 lb. pull.

• Black spring is for 3.2 lb pull. Gold and Silver colored are for 4 lb pull.
• Fits semi automatic AR-15/AR-10 receivers with .154" mil spec diameter hammer and trigger pin holes.
  
  

I walked away from one hell of a deal yesterday. LGS had an LMT .308 with a Vortex Viper Scope stabbed in a Warne Mount for sale for $1995.00. I am a regular customer so they offered it to me for $1800.00 plus tax OTD. Salesman told me I could make a counter offer to the boss. I could even use a credit card with no additional fee. I did some quick math in my pea brained noggin. Let's see, rifle about $2800.00, plus mount $125.00, and around $1100.00 for the scope. That's $4025.00 on the low side retail price new. Hmmm...so what's the deal with the rifle?

Guy bought the rifle then got into financial trouble. Traded the rifle to a guy for some work performed. Guy that did the work traded it in on a bow and some arrows. Less than 100 rounds through the rifle. Looks good as new. More pondering and thinking. OK I know the manager...I can probably get the rifle for $1700.00 no problem. Heck of it is, I don't really want the damn thing and I am unsure how hard it would be to flip for profit. Did I screw up?

b

SOLD

For sale is an excellent condition P30L (DA/SA no safety) purchased directly from LTT. 200 rounds fired.

Has the original box and papers
Comes with original trigger and trigger assembly
Comes with Landgon Trigger Job and the GG flat trigger and 12# SRT
2 17 Round mags
1 20 round mag
Comes with Trijicon HD XR tritium sights with yellow front
Comes with Gray Man Solutions Shadow AWIB holster ($130)
Comes with Fury Carry Solutions Range Holster with Safariland Fork ($75)
HOLSTERS NO LONGER AVAILABLE

Asking $750 shipped OBO from me to your FFL. If your FFL requires from an FFL add $50 to the price

Mounted and sited in. No field use. 4.5-18 mark4hd. PR2 reticle.

$SOLD shipped

Have a barrel chamber cert I was originally going to use on centerfire but am now considering their RimX prefits since I just noticed they make them. Curious if anyone has experience with their rimfire prefits and what the consensus is? Rimfire gunsmithing seems a little more niche so not sure if their centerfire reputation carries over to it.

I have a Taurus pt92 and wondering if anyone here have every put a slide and frame in a toaster oven for drying,kinda concerned on the possibility of the heat warping the frame.

Minox ZP5 MR5 for sale, the objective lens is scratched although I don’t notice it when using. $old ff or trade for a Mark 5 pr2 with cash. It’s still in use, the rings pictured are not included. Pm me with questions

I tried looking around but haven’t seen many reviews on the new defiance 75 degree bolts? Does anyone have any personal experience with them? Im considering an anti-x with one for a hunting rifle build.

Got a new unfired custom upper built from a Subborn Mule who used to OEM for noveske. Barrel is a Geissele 16" cut rifled with their longer then mid-length gas length and Geissele silver gasblock, both are no longer offered by geissele. A fde annodized chargining handle and semi-auto bcg. All together about $800 in parts. $670 shipped.

As title states have two Insite arms G2 brakes. Both are brand new unfired. Some minor rust on the back of the 5-port from storage. 5-port G2 30 cal threaded 3/4x24 $140, 4-port G2 6.5 cal threaded 5/8/x24 $120. Take $20 off is you buy both. Add $10 for shipping. Will accept paypal (F&F), zelle, usps MO and checks (ship when cleared)

I currently run a 2-10 LPVO on one of my ARs, sits on a 16 inch barrel, carbine length gas block, with a front sight post. Does not cause me any issues for what I use it for. At very low magnification, of course I pick up the FSP, but at my range I don't usually go below 4x on that gun.

Thinking of moving that upper/barrel over to a rifle that would use a red dot, and putting a mid length onto the one used with the LPVO, which would also have a front sight post.

My question is: would the difference in length of where the FSP is located on the midlength cause more or less disturbance using an LPVO? Carbine it being a bit closer to the optic, midlength being a little further away. Would the midlength cause the post to get picked up easier or other way around?

Looking for a couple TL3 223 bolt heads and 223 barrels. Prefer barrels to be new. Send me a PM with what you have.

I am looking for 1 more. Looking for a new Proof steel 223 prefit. Can be for origin or TL3.

Front Range isn't showing any in stock.

Looking for a suppressor host for a HD gun.
M&p 2.0 45 is $611 and comes with a rfx15 Viridian green dot. Only downside is 10 round mags.

FNX is $1100, no red dot and 15 round mags.

Worth double?