KRG chassis systems

L2bravo · Jun 29, 2019

So based on the recommendations I got here, I used a KRG Bravo for my 223 budget build. I could not be happier. Thanks guys.

Which leads to my next questions....
KRG makes some higher end chassis. If a guy wanted to build a rifle, (6.5/308 class) would they be a viable option? As in, will they compete with some of the higher end stuff, or are you selling yourself short and be left wanting for more?

pyplynr · Jun 29, 2019

My favorite chassis of all is the KRG Whiskey 3

Vargmat · Jun 29, 2019

KRG is good to go in any flavour you choose.

Super happy with my Whiskey 3.

supratt96 · Jun 29, 2019

The Whiskey 3 is a top tier chassis. There may be others that are just as good, but I doubt you could call them better. It really just boils down to the specific features that are important to you. The large number of accessories available for the KRG chassis make it easy to customize to your individual likes and needs. I Have been very satisfied with mine.

Basher · Jun 29, 2019

supratt96 said:
The Whiskey 3 is a top tier chassis. There may be others that are just as good, but I doubt you could call them better. It really just boils down to the specific features that are important to you. The large number of accessories available for the KRG chassis make it easy to customize to your individual likes and needs. I Have been very satisfied with mine.

^This.^

I've owned a few in the past (Bravo, X-Ray, Whiskey3), and have been happy with all of them. I only sold them because I went full AI. That having been said, I'm looking to pick up a Vudoo in the not too distant future (and selling off most everything else except for the AI and AR to afford it, haha), and am debating if I want to get an AICS AT chassis for it so it's an exact match to my AI, or if I want to get a KRG chassis for a few hundred less and call it done. Any of them will get the job done and (in my opinion) are comfy, and as noted above, are almost fully modular. Hard to go wrong with that!

Srgt. Hulka · Jun 29, 2019

Is your .223 a trainer rifle? Just my opinion, but if your .223 is a trainer, why not go with the Bravo on your 6.5/.308? Seems you’d want the same chassis, same feel and function on both.

L2bravo · Jun 29, 2019

Srgt. Hulka said:
Is your .223 a trainer rifle? Just my opinion, but if your .223 is a trainer, why not go with the Bravo on your 6.5/.308? Seems you’d want the same chassis, same feel and function on both.

No sir, it’s just a gun I put together and like to shoot.

L2bravo · Jun 29, 2019

Basher said:
^This.^

I've owned a few in the past (Bravo, X-Ray, Whiskey3), and have been happy with all of them. I only sold them because I went full AI. That having been said, I'm looking to pick up a Vudoo in the not too distant future (and selling off most everything else except for the AI and AR to afford it, haha), and am debating if I want to get an AICS AT chassis for it so it's an exact match to my AI, or if I want to get a KRG chassis for a few hundred less and call it done. Any of them will get the job done and (in my opinion) are comfy, and as noted above, are almost fully modular. Hard to go wrong with that!

So judging by how you voted with the ole wallet, you prefer an AI chassis? Anything in particular?

Basher · Jun 29, 2019

L2bravo said:
So judging by how you voted with the ole wallet, you prefer an AI chassis? Anything in particular?

Not an AI chassis, the AI system. I sold my other rifles in favor of an AIAT. I realize that while there are a few very limited aftermarket chassis options to put a de-bonded AI action in, I'm not going to de-bond a $4K rifle from it's chassis. So in a way, yes, I went with the AI chassis over other options, but ONLY because of how the entire system works together.

In reality, I'm a stock guy. If I could put my AIAT action into a McMillan A5 or Manners PRS1 and still have the same level of bomb-proof performance and reliability, I'd seriously consider it. They feel better and fit better to me. BUT, I have no qualms with the AI chassis at all, and will happily use it in order to retain all of the other benefits I feel the AI action/system possesses.

In terms of aftermarket chassis for a 700 clone however, I think my top favorite was the JAE-700 (which I got a really good deal on), followed immediately by KRG's offerings (with the Whiskey3 being at the top, of course). I don't know that I want to spend $1500+ on another chassis for a Vudoo action when a Whiskey3 at almost half the price will do the same job at less weight and with nearly the same level of comfort. If money grew on trees, I might sing a different tune, but for an affordable chassis sytem, I personally feel the KRG offerings are the best thing out there based on what I've used (allow me to state that I haven't used everything).

DynamicAccuracy · Jun 29, 2019

I have a KRG Xray chassis I swap back and forth between ln my 6.5x47 and 223 and both rifles are very accurate in it.

Bandit31 · Jun 29, 2019

I have a couple Whiskey 3's currently that I've had for awhile and have had many more (W3 and Bravo's) in the past. They are A+ in my book, same with the company themselves. There are other great chassis and stocks on the market but every time I've tried something for one reason or another, I've always ended up back with KRG.

98Vandal · Jun 29, 2019

I'm contemplating a KRG Whiskey 3 and was curious about the knobs that secure the cheek piece and butt pad. Any issues with these coming undone in a match or other hard use? I have an MPA BA that I really like but am certainly willing to try a KRG. Does KRG have a bag rider available?

Thanks for any feedback.

Praeger · Jun 29, 2019

98Vandal said:
I'm contemplating a KRG Whiskey 3 and was curious about the knobs that secure the cheek piece and butt pad. Any issues with these coming undone in a match or other hard use? I have an MPA BA that I really like but am certainly willing to try a KRG. Does KRG have a bag rider available?

Thanks for any feedback.

The cheek riser and and length of pull knobs hold fine. No problems over a year of match competitions. KRG offers two optional bag riders.

An abundance of accessories from which to choose. https://kineticresearchgroup.com/product-category/chassis-accessories/

garandman · Jun 29, 2019

Heard so mnay good things bout KRG, was bummed to find they don't (yet) make a 224 Valkyrie chassis.

Basher · Jun 29, 2019

garandman said:
Heard so mnay good things bout KRG, was bummed to find they don't (yet) make a 224 Valkyrie chassis.

Wut?

Why do you need a chassis specific to the .224V? Aren’t guys just running those through R700 clones?

garandman · Jun 29, 2019

Basher said:
Wut?

Why do you need a chassis specific to the .224V? Aren’t guys just running those through R700 clones?

I hadnt heard...

keystoneshooter · Jun 29, 2019

garandman said:
Heard so mnay good things bout KRG, was bummed to find they don't (yet) make a 224 Valkyrie chassis.

Might do some research, these guys will be all over you.

Unless your just trying to draw them out.

Basher · Jun 29, 2019

garandman said:
I hadnt heard...

There is no special action for the .224V, guys are running them through actions such as the Bighorn using a 6.8SPC bolt head.

There. That’s a thing you know now.

And the TL3 drops right into a KRG, so... it’s no factor. Go get you one and have some fun!

garandman · Jun 29, 2019

keystoneshooter said:
Might do some research, these guys will be all over you.

Unless your just trying to draw them out.

I have a day job. Guns are a hobby of mine.

And no. Not wanting to draw anyone out.

JFR · Jun 29, 2019

garandman said:
Heard so mnay good things bout KRG, was bummed to find they don't (yet) make a 224 Valkyrie chassis.

I'm thinking this is your humor?

JFR

b6graham · Jun 29, 2019

keystoneshooter said:
Might do some research, these guys will be all over you.

Unless your just trying to draw them out.

dude's a waste of internet. i can't believe he's still here.

to answer OP question. KRG = good to go like everyone else said. if it fits your budget and you like how it feels. i had a xray. didnt love it but didnt hate it either

charnicus · Jun 29, 2019

OP glad to hear you were persuaded in the right direction. Couldn’t be happier with my Whiskey 3.

garandman · Jun 30, 2019

JFR said:
I'm thinking this is your humor?

JFR

Nope.

My ignorance.

I also hoped they made a chassis for the CZ457 action. I called. They don't. Yet, anyway.

garandman · Jun 30, 2019

Basher said:
There is no special action for the .224V, guys are running them through actions such as the Bighorn using a 6.8SPC bolt head.

There. That’s a thing you know now. And the TL3 drops right into a KRG, so... it’s no factor. Go get you one and have some fun!

I am getting Bugholes to build me a 224 V on a Bighorn action. Since I didn't realize you can use the Remington pattern, I ordered a chassis from XLR who never told me its the same as a Remington 700 ... but then I didn't know to ask either.

You gotta love the wealth of information available here. Thank you.

MarinePMI · Jun 30, 2019

chrome · Jun 30, 2019

For anyone running the whiskey 3 and Trigger Tech triggers, any issues?

Steel head · Jun 30, 2019

garandman said:
Heard so mnay good things bout KRG, was bummed to find they don't (yet) make a 224 Valkyrie chassis.

Lol!

Basher said:
Wut?

Why do you need a chassis specific to the .224V? Aren’t guys just running those through R700 clones?

This!

Bandit31 · Jun 30, 2019

chrome said:
For anyone running the whiskey 3 and Trigger Tech triggers, any issues?

None. Have a special and diamond on a Stiller Tac30 and Bighorn Origin without any interference issues.

chrome · Jun 30, 2019

Bandit31 said:
None. Have a special and diamond on a Stiller Tac30 and Bighorn Origin without any interference issues.

Thanks for fast reply. Posted an inquiry in the gunsmithing sub section, but tried to put together a Curtis Vector, TT diamond, and Whiskey 3 (gen 6) this weekend and unfortunately the trigger bar gets pinned between chassis and action and can't be moved.

Got a call into KRG to see what's what regarding a recommendation, but some local colleagues in PRS forum said TT triggers generally require some small fittings. First time I've heard that personally.

Bandit31 · Jun 30, 2019

chrome said:
Thanks for fast reply. Posted an inquiry in the gunsmithing sub section, but tried to put together a Curtis Vector, TT diamond, and Whiskey 3 (gen 6) this weekend and unfortunately the trigger bar gets pinned between chassis and action and can't be moved.

Got a call into KRG to see what's what regarding a recommendation, but some local colleagues in PRS forum said TT triggers generally require some small fittings. First time I've heard that personally.

It's a tolerance stacking problem that many have had to deal with for years, long before Trigger Tech's were on the market. I've had to make relief cuts for Timney's, Jewells, and so on.

It's really not a big deal and may not be the last time you'll have to do it. Just Dremel a small relief cut until everything functions.

chrome · Jun 30, 2019

Bandit31 said:
It's a tolerance stacking problem that many have had to deal with for years, long before Trigger Tech's were on the market. I've had to make relief cuts for Timney's, Jewells, and so on.

It's really not a big deal and may not be the last time you'll have to do it. Just Dremel a small relief cut until everything functions.

Thx man. Appreciate the expectation management!

L2bravo · Jun 30, 2019

garandman said:
I have a day job. Guns are a hobby of mine.

And no. Not wanting to draw anyone out.

Yeah poor you. We are all wealthy and don’t work. Give me a break.

TSpork · Jun 30, 2019

chrome said:
For anyone running the whiskey 3 and Trigger Tech triggers, any issues?

Run a diamond on my 700 in a Whiskey 3. Zero issues

chrome · Jun 30, 2019

TSpork said:
Run a diamond on my 700 in a Whiskey 3. Zero issues

Interesting, what gen whiskey?

charnicus · Jun 30, 2019

L2bravo said:
Yeah poor you. We are all wealthy and don’t work. Give me a break.

That’s right. We just have credit cards that the significant other can’t look at hahaha.

charnicus · Jun 30, 2019

chrome said:
Interesting, what gen whiskey?

On my Gen 6 I had to remove a lot of material for the safety on my Diamond.

AK4900PA · Jun 30, 2019

Currently run a x-ray and love it. When some other projects are completed I'll be upgrading to a Whiskey 3.

TSpork · Jun 30, 2019

chrome said:
Interesting, what gen whiskey?

I’m not sure. I got it last Friday during their Black Friday Blem sale. I think it’s a mix between 5/6

chrome · Nov 3, 2019

TSpork said:
I’m not sure. I got it last Friday during their Black Friday Blem sale. I think it’s a mix between 5/6

Checking back in on this. FWIW, I ended up putting a Nucleus action and TT into the Whiskey 3, everything fit just fine, no relief needed. Something about the combo of the vector and TT.

Massoud · Nov 3, 2019

I'm not sure how I missed this thread. Thank you guys for your business and kind words! Right now I think the only triggers that don't fit without major surgery are the Tubb one and anything with a trigger hanger but there's so many now.

Also, @chrome that quote in your sig line, that is from a legit SOF guy. He's a buddy of ours. Not sure if he was being serious or not, or knows something I don't know, haha.
Justin

Jscb1b · Nov 3, 2019

I picked up a wiskey 3 in the PX. I was able to take it out today. I've very happy with it. The people I shoot with have never used a chassis before. Three people between 4'10" and 6' even where able to set the LOP and cheek riser to fit them comfortable in less time for me to write this. +1 on the wiskey!

Dooby · Nov 4, 2019

I've got 4 Whiskey 3 Chassis. One LA and the rest are SA. Only one is being used...still waiting for parts for the other rifles. Also got 2 Bravos. Love these Chassis'.

Forrest84 · Nov 4, 2019

chrome said:
For anyone running the whiskey 3 and Trigger Tech triggers, any issues?

I just bought my smiths personal surgeon match rifle in a whisky 3 and it has a trigger tech in it and I don’t think he had to do anything

Having trouble using the site?

Subscribe to HideTV with code XMAS20 for 20% Off

KRG chassis systems

Private

Full Member

Sergeant

Sergeant

I fly stuff and I know things.

Lighten Up Francis

Private

Private

I fly stuff and I know things.

Private

Supporter

Banhammer

Gunny Sergeant

Bad Advice for Free

I fly stuff and I know things.

Bad Advice for Free

Private

I fly stuff and I know things.

Bad Advice for Free

Sergeant of the Hide

MMPRL

👻👻👻

Bad Advice for Free

Bad Advice for Free

Ban Cat Handler

Private

Feral kitten

Supporter

Private

Supporter

Private

Private

Private

Private

👻👻👻

👻👻👻

Sergeant

Private

Private

Sergeant

Dumbass.

Private

Supporter

Similar threads