Well mine is from last august and it never said that until now when I checked it.It says that on mine after every time I submit an eForm to the ATF, but then after a couple days it goes back to normal automatically. Don’t freak out folks.![]()
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!
Join the contest SubscribeWell mine is from last august and it never said that until now when I checked it.It says that on mine after every time I submit an eForm to the ATF, but then after a couple days it goes back to normal automatically. Don’t freak out folks.![]()
Odd, but I'd contact them, and then see what they say. Mine happens every time I submit an eForm, and then a day or 2 later, it goes back to normal automatically.Well mine is from last august and it never said that until now when I checked it.
Just went and checked, and they have added 2 new questions to answer since my last eForm submission. Took 30 seconds to complete, and done.All the people that had it happen in Reddit were in the same boat as me. They said the questions were new. I think 6 and 6a
No bullshit I’ve been thinking about itWell the data leads me to believe the AFT is pushing for everyone to buy five (or 4) or more cans at a time
Suppressed pews are happy pews![]()
I think what you are speaking about is two new questions that have been added that need to be answered: questions 6.a. and 6.b. these would apply to the form called, “National Firearm Act (NFA)(Responsible Person Questionnaire.” Is this what you are referring to that are showing incomplete when you checked it?In the Reddit page I saw a post about everyone’s silencer shop information being incomplete when they checked it. I went to my dash board on the site and mine was incomplete as well. This is so confusing as I was extremely careful to do all this completely. I completed the information and sent them an email as well but haven’t heard back. Hopefully this is info helps anyone out that is using silencer shop. Check yours out and let us know if the same thing happened to you
That makes sense . This whole situation is just so fucked up you spend all this time worried you miss something and then that happened .I think what you are speaking about is two new questions that have been added that need to be answered: questions 6.a. and 6.b. these would apply to the form called, “National Firearm Act (NFA)(Responsible Person Questionnaire.” Is this what you are referring to that are showing incomplete when you checked it?
If so, those new questions would apply to new submissions for future cans that you have not submitted yet, not the cans you already have submitted In pending status. That red banner at the top of the page in your Silencer Shop account with the message: “Required: Your Registration is missing information,” would also be there if your picture was out of date (it is only good for one year), but that does not mean your pending submission would be rejected if the ATF took longer than one year to process, it just means the picture has to have been taken in the previous year at the time of submission.
Remember ATF has said that no changes can be made to an eform already in process.
I get it and I get your concern. If you want to confirm that everything is ok with your pending submissions, login into your Silencer Shop account click on the “Dashboard” tab and under that click on the blue “View” box, of the respective suppressor(s) that is submitted and that opens your docusign form that you signed. When you get to the RPQ page with all the questions answered with the “X” mark do you see questions 6a and 6b? No, because that was the form you submitted pre-revision and your docusign is a pdf so it cannot be edited. Then go back and click on the black box called, “Details” and that will bring up your “Sign Status” and it should show “completed.” So if you have “completed“ status and your Docusign doesn’t have blank questions 6a and 6b (they won’t be there, because those questions didn’t exist on that version of eforms) then you’re golden, good to go.That makes sense . This whole situation is just so fucked up you spend all this time worried you miss something and then that happened .
Looks like I’m all good sitting here at ten monthsI get it and I get your concern. If you want to confirm that everything is ok with your pending submissions, login into your Silencer Shop account click on the “Dashboard” tab and under that click on the blue “View” box, of the respective suppressor(s) that is submitted and that opens your docusign form that you signed. When you get to the RPQ page with all the questions answered with the “X” mark do you see questions 6a and 6b? No, because that was the form you submitted pre-revision and your docusign is a pdf so it cannot be edited. Then go back and click on the black box called, “Details” and that will bring up your “Sign Status” and it should show “completed.” So if you have “completed“ status and your Docusign doesn’t have blank questions 6a and 6b (they won’t be there, because those questions didn’t exist on that version of eforms) then you’re golden, good to go.
Silencer Shop will have a failsafe built into the submission process from now on that won’t even permit you to certify with your dealer until you answer those two questions.
Silencer Shop could do a better job and send all of their customers a notification email letting them know those two questions must be answered before they can do another submission.
They did that to me for my last form 4, woke up on a Sunday morning to find an email from a little after 0700 mountain time. Checked the date to make sure it was done on say Friday afternoon and I was just now getting the approval. Nope, same day. The dealer thought I bullshitting him that morning when I called to say dust off the box cause I was coming by to it up. He checks and said “first time I ever saw one get approved on a sunday”. I certainly wouldn’t have expected it.Suppressor approval inconsistency never ceases to amaze. I got a eform 4 trust approval today, on a Sunday. Happy Father’s Day to me.![]()
Congrats. Hoping I’ll be next since I also certified a can on 10/11/22.TRUST
CERT 10-11-22
Stamp 6-19-23
Yep definitely computer spitting out the approval emails. my last 2 approvals were on federal holidays.So the ATF agents must approve our forms and put them in a que which then spits em out randomly. I HIGHLY doubt ATF agents are working all hours of the night and on weekends.
Anyone know anything about this?
I haven't.Do most people apply for a UPIN number for their approvals?
I totally forgot the thread was about Form4 wait times....
You can't fix stupid...as an aside, had a customer cancel a form 4 for a suppressor after waiting 6 months because he said it took too long and his trust would be faster,
so he called, cancelled it, and we re efiled in his trust, 7 months ago,,,
Aside from having one of your representatives inquire on your behalf thats about all you can do. And it seems like half the time they blow off representatives with a very generic response. Its just a cruel waiting game unfortunately. Im at exactly 9 months today, hopefully i will wake up to my approval email any day now.I’m at 316 days. I’ve called NFA and gotten “pending”. Anything else I can/should do? I’m guessing no but I figured I’d ask.
This is what @Browninglover1 looks like in real life! That's why it only took 103 days. Congratulations!So biggest shock of my week, all 4 of my suppressors filed on 3/14 were approved today at 5:45 PM mountain time. All were filed on a trust and I got the call from my dealer to pick them up Monday.![]()
I did. Seems like it’s just for website and other updates not tied to my actual Forms I have going.I didn't get one, better click the "it was an error" link.
They’ll send you a denial, that’s how you’ll know.Dumb question, probably. I filed an eform1 on the ATF website and feel like I messed something up. How will they notify me if there is a fuck up? Or do I just need to review my eforms periodically?
Email? Snail mail?They’ll send you a denial, that’s how you’ll know.
Efile = email; paper form = snail mail.Email? Snail mail?
How do you like that can. I just ordered oneenergetic arms NYX 22
Silencer Shop Form 4 Trust
Filed 10/21/2022
Approved 6/25/2023
248 days
Have not picked it up yet. Probably later in the week and will let you know. Got it for the weightHow do you like that can. I just ordered one
Nice! I have 3 in the queue, won't get as lucky as you, but hoping for a batch approval. Congrats.Batch approval
NFA Trust
Abel Co Theorem
CGS Hyperion
AB Raptor 4
First filed 2/21/23
Last filed 4/12/23
Approved 6/19/2023View attachment 8170945