Looking for a good reloading manual

Hornady 11th edition cartridge reloading has exactly what you need. 6 mm ARC has different load data for gas gun and bolt action. Definitely pay heed to the gas gun data and do not exceed the recommended loads for gas guns, 58 gr through 110 Atip. Page 239 through to page 251...all the data you need.
 
  • Like
Reactions: YotaEer
So reloading data is interchangeable? I know that the brass share a lot of similarities.
No! The 6mm ARC and 6mm PPC are not the interchangeable in load data. I have the Hornady manual for both. There is about 7 grs different on max powder charges on average between the gas gun ARC & PPC, with completely different powders.
Get the Hornady manual, and get full potential out of the 6mm ARC....safety.
 
For the last week I've been trying to find reload data from bullet manufacturere and powder company's. The Hodgdon online manual has good data, except for the bullet(s) I have in hand(75gr).
Very new to the 6ARC, as a matter of fact, I don't even have the rifle yet. Was supposed to be in hand last Friday, but the shop where it was to be delivered to was closed and then yesterday he was open until 1PM but UPS failed to get around before he closed for the day. Now, tomorrow the rifle should be delivered to the shop again and I will do the 4473 and be delayed. The last 7 or 8 firearm purchases for me have been delayed, usually for 2~3 hours and then released. This shop is about 55 miles from me so this could possibly cause me to drive over there tomorrow and Tuesday. What a CLUSTER!!
 
Nosler has load data online for free. Hodgdon was already mentioned.

One thing I do sometimes is do a Google image search for a particular cartridge. You may be able to find a picture of a page from a manual and save it.

Worth a shot.
 
  • Like
Reactions: Capt45
I need specific 6mm ARC reloading manual that shows data for the smaller bullets (75gr) and up. What would be your recommendation"
Hornady, Hodgdon & Lyman are your current options & do quite well. We are wanting for more, though Happy to have what is currently available. Lyman is skimpy at best. Did I miss where you specified gas or bolt gun data?

Look forward Nosler embracing the 6mm ARC as I like there data offerings. Really sorry to see none of there components are 6mm ARC compatible:)


 
  • Like
Reactions: Capt45
For the last week I've been trying to find reload data from bullet manufacturere and powder company's. The Hodgdon online manual has good data, except for the bullet(s) I have in hand(75gr).
Very new to the 6ARC, as a matter of fact, I don't even have the rifle yet. Was supposed to be in hand last Friday, but the shop where it was to be delivered to was closed and then yesterday he was open until 1PM but UPS failed to get around before he closed for the day. Now, tomorrow the rifle should be delivered to the shop again and I will do the 4473 and be delayed. The last 7 or 8 firearm purchases for me have been delayed, usually for 2~3 hours and then released. This shop is about 55 miles from me so this could possibly cause me to drive over there tomorrow and Tuesday. What a CLUSTER!!
Load data for 6 mm ARC 75 gr bullet...gas gun,.. bolt guns, have a bit higher pressure load data.
 

Attachments

  • 20230917_205628.jpg
    20230917_205628.jpg
    553.5 KB · Views: 79
  • Like
Reactions: Capt45